chore(deps): update dependency @biomejs/biome to v2.5.11

* fix: raise the output budget so reasoning models reach the tool call

A reasoning model spends the output budget in order: thinking first, then prose,
then the tool call. With 16000 the thinking alone can consume all of it, so the
turn ends with finishReason "length" before display_diagram is ever called. The
canvas stays empty and nothing surfaces in the UI, because no tool call means no
tool error, and the client never reads finishReason.

Measured on openrouter deepseek/deepseek-v4-flash, the model from the report:
- max_tokens=800 with reasoning on returns reasoning_tokens=800, empty content,
  finish_reason length. So reasoning is billed against this budget, not exempt.
- refining an existing diagram (19k chars of XML in the input) produced 49142
  chars of reasoning, zero tool calls, finishReason "length" at 16000
- the same request at 40000 finished and called edit_diagram with 12 operations

64000 cannot just be sent to every model: bedrock claude-3-haiku caps at 4096,
nova-lite at 10000, and the openrouter deepseek-r1 endpoint counts input and
output against one 64000 ceiling. All three name the real limit in the 400, so
parse it and retry once. Verified: nova-lite logs "64000 rejected, retrying with
10000" and then completes its tool call.

Also expose the budget in Settings. It is sent as a header rather than read from
env only, so desktop users can raise it themselves without an env file.

vercel.json goes back to the 300s it had before #238 traded it for $2-4/month.
That is now Vercel's own default, and billing pauses while the function waits on
the model, so the saving that motivated 120s no longer applies. edgeone.json is
left alone: its 120 may be that platform's actual ceiling.

* fix: only reinterpret an error as a budget rejection when it says so

Review of the first commit found the retry could fire on errors that have
nothing to do with the budget, which would replace a readable provider error
with a truncated response: exactly the symptom this PR exists to remove.

- Drop the generic "lower than N" pattern. For the Bedrock message it was dead
  code, since "model limit of N" matches first with the same number. Left live,
  it would read a number out of any message shaped like "must be lower than 2".
- Skip errors whose status is not 400 or 422, so auth and rate-limit failures
  are never reinterpreted.
- Require the parsed ceiling to be at least 1024. Below that a diagram cannot
  come out whole, so retrying would hide the error behind broken XML.
- Validate MAX_OUTPUT_TOKENS from env the same way as the header, so a stray
  "-1" falls back instead of reaching the provider.

Adds tests for the retry wrapper itself, which had none: it retries once with
the named ceiling, leaves a 401 alone, does not retry when the ceiling is not
smaller, propagates a second rejection, and preserves the other call options.

Re-verified against the live APIs: bedrock nova-lite still logs "64000 rejected,
retrying with 10000" and completes its tool call, and deepseek-v4-flash still
finishes normally at 64000.

.github/renovate.json

@@ -33,6 +33,11 @@
             "matchPackagePatterns": ["@ai-sdk/*", "ai", "next"],
             "groupName": "Core framework packages",
             "automerge": false
+        },
+        {
+            "matchPackageNames": ["@biomejs/biome"],
+            "groupName": "Biome",
+            "automerge": false
         }
     ],
     "vulnerabilityAlerts": {

.github/workflows/auto-format.yml

@@ -23,7 +23,9 @@ jobs:
           node-version: '24'
 
       - name: Run Biome format
-        run: npx @biomejs/biome@latest check --write --no-errors-on-unmatched .
+        # Pin to the version in package.json so CI matches local/pre-commit
+        # (npx @latest drifts — e.g. 2.5.0 broke this job on unrelated PRs).
+        run: npx @biomejs/biome@2.4.13 check --write --no-errors-on-unmatched .
 
       - name: Check for changes
         id: changes

.github/workflows/docker-build.yml

@@ -58,6 +58,8 @@ jobs:
         with:
           context: .
           push: ${{ github.event_name != 'pull_request' }}
+          provenance: mode=max
+          sbom: true
           tags: ${{ steps.meta.outputs.tags }}
           labels: ${{ steps.meta.outputs.labels }}
           cache-from: type=gha
@@ -89,4 +91,3 @@ jobs:
           docker pull ghcr.io/${REPO_LOWER}:latest
           docker tag ghcr.io/${REPO_LOWER}:latest ${{ secrets.AWS_ACCOUNT_ID }}.dkr.ecr.ap-northeast-1.amazonaws.com/next-ai-draw-io:latest
           docker push ${{ secrets.AWS_ACCOUNT_ID }}.dkr.ecr.ap-northeast-1.amazonaws.com/next-ai-draw-io:latest
-

.github/workflows/publish-mcp.yml

@@ -0,0 +1,67 @@
+name: Publish MCP Server
+
+# Publishes @next-ai-drawio/mcp-server to npm via OIDC trusted publishing
+# (no token, no OTP). Triggers when packages/mcp-server changes on main;
+# skips silently if the package.json version is already on npm — so a
+# release is just "bump the version in a PR and merge".
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - "packages/mcp-server/**"
+  workflow_dispatch:
+
+permissions:
+  contents: read
+  id-token: write # OIDC token for npm trusted publishing
+
+concurrency:
+  group: publish-mcp
+  cancel-in-progress: false
+
+jobs:
+  publish:
+    runs-on: ubuntu-latest
+    defaults:
+      run:
+        working-directory: packages/mcp-server
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Node.js
+        uses: actions/setup-node@v6
+        with:
+          node-version: 24
+          cache: "npm"
+          cache-dependency-path: packages/mcp-server/package-lock.json
+          registry-url: "https://registry.npmjs.org"
+
+      # Trusted publishing requires npm >= 11.5.1
+      - name: Update npm
+        run: npm install -g npm@latest
+
+      - name: Check if version is already published
+        id: version
+        run: |
+          LOCAL=$(node -p "require('./package.json').version")
+          if npm view "@next-ai-drawio/mcp-server@${LOCAL}" version >/dev/null 2>&1; then
+            echo "Version ${LOCAL} already on npm - nothing to publish"
+            echo "publish=false" >> "$GITHUB_OUTPUT"
+          else
+            echo "Version ${LOCAL} not on npm - publishing"
+            echo "publish=true" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Install dependencies
+        if: steps.version.outputs.publish == 'true'
+        run: npm ci
+
+      - name: Test
+        if: steps.version.outputs.publish == 'true'
+        run: npm test
+
+      - name: Publish to npm
+        if: steps.version.outputs.publish == 'true'
+        run: npm publish

.github/workflows/test.yml

@@ -28,6 +28,16 @@ jobs:
       - name: Run unit tests
         run: npm run test -- --run
 
+      # The MCP server package ships its own vitest because its DOM polyfill
+      # (linkedom) needs `environment: node`, while the root vitest uses jsdom
+      # for the Next.js app. Install + run its tests separately so CI catches
+      # multi-page mxfile regressions.
+      - name: Install MCP server dependencies
+        run: npm --prefix packages/mcp-server ci
+
+      - name: Run MCP server unit tests
+        run: npm --prefix packages/mcp-server test
+
   e2e:
     name: E2E Tests
     runs-on: ubuntu-latest

.gitignore

@@ -76,3 +76,6 @@ ai-models.json
 # local backups
 *.bak
 .gstack/
+
+# admin panel settings (contains secrets)
+data/

Dockerfile

@@ -61,6 +61,9 @@ COPY --from=builder /app/public ./public
 COPY --from=builder --chown=nextjs:nodejs /app/.next/standalone ./
 COPY --from=builder --chown=nextjs:nodejs /app/.next/static ./.next/static
 
+# Writable dir for admin panel settings (data/settings.json)
+RUN mkdir -p /app/data && chown nextjs:nodejs /app/data
+
 USER nextjs
 
 EXPOSE 3000

README.md

@@ -21,6 +21,17 @@ A Next.js web application that integrates AI capabilities with draw.io diagrams.
 
 > Note: Thanks to <img src="https://raw.githubusercontent.com/DayuanJiang/next-ai-draw-io/main/public/doubao-color.png" alt="" height="20" /> [ByteDance Doubao](https://www.volcengine.com/activity/codingplan?ac=MMAP8JTTCAQ2&rc=Z9Z3LDTJ&utm_campaign=drawio&utm_content=drawio&utm_medium=devrel&utm_source=OWO&utm_term=drawio) sponsorship, the demo site now uses the powerful glm-4.7 model!
 
+<p align="center">
+  <a href="https://www.atlascloud.ai/?utm_source=github&utm_medium=link&utm_campaign=next-ai-draw-io">
+    <picture>
+      <source media="(prefers-color-scheme: dark)" srcset="./public/atlas-cloud-logo-white.svg">
+      <img src="./public/atlas-cloud-logo.svg" alt="Atlas Cloud" width="200">
+    </picture>
+  </a>
+</p>
+
+> 🎁 Thanks to **[Atlas Cloud](https://www.atlascloud.ai/?utm_source=github&utm_medium=link&utm_campaign=next-ai-draw-io)** for sponsoring next-ai-draw-io. Its OpenAI-compatible API gives diagram workflows one provider connection for DeepSeek, Qwen, GLM, Kimi, MiniMax, and more. Budget-friendly access is available through the [Coding Plan](https://www.atlascloud.ai/console/coding-plan).
+
 
 https://github.com/user-attachments/assets/9d60a3e8-4a1c-4b5e-acbb-26af2d3eabd1
 
@@ -43,6 +54,8 @@ https://github.com/user-attachments/assets/9d60a3e8-4a1c-4b5e-acbb-26af2d3eabd1
     - [Deploy on Vercel](#deploy-on-vercel)
     - [Deploy on Cloudflare Workers](#deploy-on-cloudflare-workers)
   - [Multi-Provider Support](#multi-provider-support)
+    - [Server-Side Multi-Model Configuration](#server-side-multi-model-configuration)
+    - [Admin Panel](#admin-panel)
   - [How It Works](#how-it-works)
   - [Support \& Contact](#support--contact)
   - [FAQ](#faq)
@@ -209,11 +222,13 @@ See the [Next.js deployment documentation](https://nextjs.org/docs/app/building-
 -   Azure OpenAI
 -   Ollama
 -   OpenRouter
+-   AIHubMix
 -   DeepSeek
 -   SiliconFlow
 -   ModelScope
 -   SGLang
 -   Vercel AI Gateway
+-   [Atlas Cloud](https://www.atlascloud.ai/?utm_source=github&utm_medium=link&utm_campaign=next-ai-draw-io)
 
 
 All providers except AWS Bedrock and OpenRouter support custom endpoints.
@@ -222,7 +237,13 @@ All providers except AWS Bedrock and OpenRouter support custom endpoints.
 
 ### Server-Side Multi-Model Configuration
 
-Administrators can configure multiple server-side models that are available to all users without requiring personal API keys. Configure via `AI_MODELS_CONFIG` environment variable (JSON string) or `ai-models.json` file.
+Administrators can configure multiple server-side models that are available to all users without requiring personal API keys. Configure via `AI_MODELS_CONFIG` environment variable (JSON string) or `ai-models.json` file. For a single-provider quick setup, list comma-separated model IDs in `AI_MODEL`.
+
+### Admin Panel
+
+Set the `ADMIN_PASSWORD` environment variable and visit `/admin` to manage server settings (models, access codes, features, observability, quota) from a web panel instead of hand-editing `.env`.
+
+📖 **[Admin Panel Guide](./docs/en/admin-panel.md)** — setup, precedence rules, and notes.
 
 **Model Requirements**: This task requires strong model capabilities for generating long-form text with strict formatting constraints (draw.io XML). Recommended models include Claude Sonnet 4.5, GPT-5.1, Gemini 3 Pro, and DeepSeek V3.2/R1.
 
@@ -244,6 +265,8 @@ Diagrams are represented as XML that can be rendered in draw.io. The AI processe
 
 **Special thanks to [ByteDance Doubao](https://www.volcengine.com/activity/codingplan?ac=MMAP8JTTCAQ2&rc=Z9Z3LDTJ&utm_campaign=drawio&utm_content=drawio&utm_medium=devrel&utm_source=OWO&utm_term=drawio) for sponsoring the API token usage of the demo site!** Register on the ARK platform to get 500K free tokens for all models!
 
+**Special thanks to [Atlas Cloud](https://www.atlascloud.ai/?utm_source=github&utm_medium=link&utm_campaign=next-ai-draw-io) for sponsoring next-ai-draw-io and supporting its multi-provider ecosystem!** Try its OpenAI-compatible LLM API through the [Atlas Cloud Coding Plan](https://www.atlascloud.ai/console/coding-plan).
+
 If you find this project useful, please consider [sponsoring](https://github.com/sponsors/DayuanJiang) to help me host the live demo site!
 
 For support or inquiries, please open an issue on the GitHub repository or contact the maintainer at:

app/[lang]/admin/admin-shared.ts

@@ -0,0 +1,65 @@
+import { getApiEndpoint } from "@/lib/base-path"
+import type { ProviderName } from "@/lib/types/model-config"
+
+export const SESSION_PASSWORD_KEY = "next-ai-draw-io-admin-password"
+
+// ── Shared types ─────────────────────────────────────────────────────
+
+export type SecretValue = { isSet: true; hint: string }
+
+export function isSecretValue(v: unknown): v is SecretValue {
+    return typeof v === "object" && v !== null && "isSet" in v
+}
+
+export interface SettingState {
+    key: string
+    source: "file" | "env" | "default"
+    value: string | SecretValue | null
+}
+
+export type SettingsMap = Record<string, SettingState>
+
+// Editable text of a saved setting; secrets have none (write-only)
+export function savedTextOf(state: SettingState | undefined): string {
+    return state && !isSecretValue(state.value) ? (state.value ?? "") : ""
+}
+
+// Admin provider in client state. Secret fields hold either a masked
+// marker (unchanged) or a plaintext string (new value).
+export interface AdminProvider {
+    id: string
+    provider: ProviderName
+    name?: string
+    apiKey?: string | SecretValue
+    baseUrl?: string
+    awsAccessKeyId?: string | SecretValue
+    awsSecretAccessKey?: string | SecretValue
+    awsRegion?: string
+    vertexApiKey?: string | SecretValue
+    models: string[]
+    isDefault?: boolean
+}
+
+// Provider defined in AI_MODELS_CONFIG / ai-models.json — shown read-only
+export interface EnvProvider {
+    name: string
+    provider: ProviderName
+    models: string[]
+    isDefault: boolean
+}
+
+export async function adminFetch(path: string, pw: string, init?: RequestInit) {
+    const res = await fetch(getApiEndpoint(path), {
+        ...init,
+        headers: {
+            ...init?.headers,
+            "x-admin-password": pw,
+            ...(init?.body ? { "Content-Type": "application/json" } : {}),
+        },
+    })
+    const data = await res.json().catch(() => ({}))
+    if (!res.ok) {
+        throw new Error(data.error || `Request failed (${res.status})`)
+    }
+    return data
+}

app/[lang]/admin/models-section.tsx

@@ -0,0 +1,609 @@
+import {
+    AlertCircle,
+    Check,
+    Loader2,
+    Plus,
+    Star,
+    Trash2,
+    X,
+    Zap,
+} from "lucide-react"
+import { useState } from "react"
+import { ProviderCredentialsFields } from "@/components/provider-credentials-fields"
+import { ProviderLogo } from "@/components/provider-logo"
+import {
+    AlertDialog,
+    AlertDialogAction,
+    AlertDialogCancel,
+    AlertDialogContent,
+    AlertDialogDescription,
+    AlertDialogFooter,
+    AlertDialogHeader,
+    AlertDialogTitle,
+} from "@/components/ui/alert-dialog"
+import { Button } from "@/components/ui/button"
+import { Input } from "@/components/ui/input"
+import { Label } from "@/components/ui/label"
+import {
+    Select,
+    SelectContent,
+    SelectItem,
+    SelectTrigger,
+} from "@/components/ui/select"
+import { Switch } from "@/components/ui/switch"
+import { useDictionary } from "@/hooks/use-dictionary"
+import { formatMessage } from "@/lib/i18n/utils"
+import {
+    FIXED_CRED_PROVIDERS,
+    PROVIDER_INFO,
+    type ProviderName,
+    SUGGESTED_MODELS,
+} from "@/lib/types/model-config"
+import { cn } from "@/lib/utils"
+import {
+    type AdminProvider,
+    adminFetch,
+    type EnvProvider,
+} from "./admin-shared"
+import { SecretInput } from "./setting-field"
+
+// ── Models section (mirrors the user ModelConfigDialog) ──────────────
+
+function ProviderDetail({
+    provider,
+    disabled,
+    password,
+    onUpdate,
+    onDelete,
+}: {
+    provider: AdminProvider
+    disabled: boolean
+    password: string
+    onUpdate: (patch: Partial<AdminProvider>) => void
+    onDelete: () => void
+}) {
+    const dict = useDictionary()
+    const [modelInput, setModelInput] = useState("")
+    const [deleteOpen, setDeleteOpen] = useState(false)
+    const [testing, setTesting] = useState<string | null>(null)
+    const [testResults, setTestResults] = useState<
+        Record<string, { ok: boolean; message: string }>
+    >({})
+
+    const info = PROVIDER_INFO[provider.provider]
+    const suggestions = (SUGGESTED_MODELS[provider.provider] || []).filter(
+        (m) => !provider.models.includes(m),
+    )
+
+    const addModel = (modelId: string) => {
+        const trimmed = modelId.trim()
+        if (!trimmed || provider.models.includes(trimmed)) return
+        onUpdate({ models: [...provider.models, trimmed] })
+        setModelInput("")
+    }
+
+    const testModel = async (modelId: string) => {
+        setTesting(modelId)
+        try {
+            const data = await adminFetch("/api/admin/test-model", password, {
+                method: "POST",
+                body: JSON.stringify({ provider, modelId }),
+            })
+            setTestResults((prev) => ({
+                ...prev,
+                [modelId]: data.valid
+                    ? {
+                          ok: true,
+                          message: formatMessage(dict.admin.testOk, {
+                              ms: data.responseTime,
+                          }),
+                      }
+                    : {
+                          ok: false,
+                          message: data.error || dict.admin.testFailed,
+                      },
+            }))
+        } catch (err) {
+            setTestResults((prev) => ({
+                ...prev,
+                [modelId]: {
+                    ok: false,
+                    message:
+                        err instanceof Error
+                            ? err.message
+                            : dict.admin.testFailed,
+                },
+            }))
+        } finally {
+            setTesting(null)
+        }
+    }
+
+    return (
+        <div className="space-y-6">
+            <div className="flex items-center gap-3">
+                <div className="flex h-10 w-10 items-center justify-center rounded-lg bg-muted">
+                    <ProviderLogo
+                        provider={provider.provider}
+                        className="size-5"
+                    />
+                </div>
+                <div className="min-w-0 flex-1">
+                    <h3 className="font-semibold">{info.label}</h3>
+                    <p className="text-xs text-muted-foreground">
+                        {provider.models.length === 0
+                            ? dict.admin.noModelsConfigured
+                            : formatMessage(
+                                  provider.models.length === 1
+                                      ? dict.admin.modelCount
+                                      : dict.admin.modelCountPlural,
+                                  { count: provider.models.length },
+                              )}
+                    </p>
+                </div>
+                <label className="flex cursor-pointer items-center gap-1.5 text-xs text-muted-foreground">
+                    <Star
+                        className={cn(
+                            "h-3.5 w-3.5",
+                            provider.isDefault &&
+                                "fill-amber-400 text-amber-400",
+                        )}
+                        aria-hidden="true"
+                    />
+                    {dict.admin.default}
+                    <Switch
+                        checked={!!provider.isDefault}
+                        disabled={disabled}
+                        aria-label={dict.admin.setAsDefault}
+                        onCheckedChange={(checked) =>
+                            onUpdate({ isDefault: checked })
+                        }
+                    />
+                </label>
+                <Button
+                    type="button"
+                    variant="ghost"
+                    size="sm"
+                    disabled={disabled}
+                    className="text-destructive hover:bg-destructive/10 hover:text-destructive"
+                    onClick={() => setDeleteOpen(true)}
+                >
+                    <Trash2 className="mr-1.5 h-4 w-4" aria-hidden="true" />
+                    {dict.admin.delete}
+                </Button>
+            </div>
+
+            {/* Credentials (shared with the user ModelConfigDialog) */}
+            <ProviderCredentialsFields
+                provider={provider.provider}
+                name={provider.name}
+                baseUrl={provider.baseUrl}
+                awsRegion={provider.awsRegion}
+                disabled={disabled}
+                onChange={(field, value) => onUpdate({ [field]: value })}
+                renderSecret={({ field, id }) => (
+                    // Bare id keeps the shared component's <Label htmlFor={id}>
+                    // associated; only one ProviderDetail is mounted at a time.
+                    <SecretInput
+                        id={id}
+                        keepOnEmpty
+                        value={provider[field]}
+                        disabled={disabled}
+                        onChange={(v) => onUpdate({ [field]: v })}
+                    />
+                )}
+            />
+
+            {/* Models */}
+            <div>
+                <div className="mb-2 flex flex-wrap items-center justify-between gap-2">
+                    <Label className="text-xs font-medium uppercase tracking-wider text-muted-foreground">
+                        {dict.admin.models}
+                    </Label>
+                    <div className="flex items-center gap-1.5">
+                        <Input
+                            value={modelInput}
+                            disabled={disabled}
+                            placeholder={dict.admin.modelIdPlaceholder}
+                            spellCheck={false}
+                            className="h-8 w-48 font-mono text-xs"
+                            onChange={(e) => setModelInput(e.target.value)}
+                            onKeyDown={(e) => {
+                                if (e.key === "Enter") addModel(modelInput)
+                            }}
+                        />
+                        <Button
+                            type="button"
+                            variant="outline"
+                            size="sm"
+                            className="h-8"
+                            disabled={disabled || !modelInput.trim()}
+                            aria-label={dict.admin.addModel}
+                            onClick={() => addModel(modelInput)}
+                        >
+                            <Plus className="h-3.5 w-3.5" aria-hidden="true" />
+                        </Button>
+                        {suggestions.length > 0 && (
+                            <Select
+                                disabled={disabled}
+                                onValueChange={(v) => addModel(v)}
+                            >
+                                <SelectTrigger className="h-8 w-28 text-xs">
+                                    {dict.admin.suggested}
+                                </SelectTrigger>
+                                <SelectContent className="max-h-72">
+                                    {suggestions.map((m) => (
+                                        <SelectItem
+                                            key={m}
+                                            value={m}
+                                            className="font-mono text-xs"
+                                        >
+                                            {m}
+                                        </SelectItem>
+                                    ))}
+                                </SelectContent>
+                            </Select>
+                        )}
+                    </div>
+                </div>
+                <div className="overflow-hidden rounded-lg border">
+                    {provider.models.length === 0 ? (
+                        <p className="p-5 text-center text-sm text-muted-foreground">
+                            {dict.admin.addProviderToOfferModels}
+                        </p>
+                    ) : (
+                        <ul className="divide-y">
+                            {provider.models.map((modelId, index) => {
+                                const result = testResults[modelId]
+                                return (
+                                    <li
+                                        key={modelId}
+                                        className="flex items-center gap-2 px-3 py-2"
+                                    >
+                                        <span className="min-w-0 flex-1 truncate font-mono text-xs">
+                                            {modelId}
+                                            {provider.isDefault &&
+                                                index === 0 && (
+                                                    <span className="ml-2 rounded bg-amber-500/10 px-1.5 py-0.5 text-[10px] font-medium uppercase text-amber-600 dark:text-amber-400">
+                                                        {
+                                                            dict.admin
+                                                                .defaultModel
+                                                        }
+                                                    </span>
+                                                )}
+                                        </span>
+                                        {result && (
+                                            <span
+                                                className={cn(
+                                                    "flex items-center gap-1 text-xs",
+                                                    result.ok
+                                                        ? "text-green-600 dark:text-green-400"
+                                                        : "text-destructive",
+                                                )}
+                                            >
+                                                {result.ok ? (
+                                                    <Check
+                                                        className="h-3.5 w-3.5"
+                                                        aria-hidden="true"
+                                                    />
+                                                ) : (
+                                                    <AlertCircle
+                                                        className="h-3.5 w-3.5"
+                                                        aria-hidden="true"
+                                                    />
+                                                )}
+                                                <span className="max-w-48 truncate">
+                                                    {result.message}
+                                                </span>
+                                            </span>
+                                        )}
+                                        <Button
+                                            type="button"
+                                            variant="ghost"
+                                            size="sm"
+                                            className="h-7 px-2 text-xs"
+                                            disabled={
+                                                disabled || testing !== null
+                                            }
+                                            onClick={() =>
+                                                void testModel(modelId)
+                                            }
+                                        >
+                                            {testing === modelId ? (
+                                                <Loader2
+                                                    className="h-3.5 w-3.5 animate-spin motion-reduce:animate-none"
+                                                    aria-hidden="true"
+                                                />
+                                            ) : (
+                                                <Zap
+                                                    className="h-3.5 w-3.5"
+                                                    aria-hidden="true"
+                                                />
+                                            )}
+                                            <span className="ml-1">
+                                                {dict.admin.test}
+                                            </span>
+                                        </Button>
+                                        <Button
+                                            type="button"
+                                            variant="ghost"
+                                            size="icon"
+                                            className="h-7 w-7"
+                                            disabled={disabled}
+                                            aria-label={formatMessage(
+                                                dict.admin.removeModel,
+                                                { model: modelId },
+                                            )}
+                                            onClick={() =>
+                                                onUpdate({
+                                                    models: provider.models.filter(
+                                                        (m) => m !== modelId,
+                                                    ),
+                                                })
+                                            }
+                                        >
+                                            <X
+                                                className="h-3.5 w-3.5"
+                                                aria-hidden="true"
+                                            />
+                                        </Button>
+                                    </li>
+                                )
+                            })}
+                        </ul>
+                    )}
+                </div>
+            </div>
+
+            <AlertDialog open={deleteOpen} onOpenChange={setDeleteOpen}>
+                <AlertDialogContent>
+                    <AlertDialogHeader>
+                        <AlertDialogTitle>
+                            {formatMessage(dict.admin.deleteProviderTitle, {
+                                name: provider.name || info.label,
+                            })}
+                        </AlertDialogTitle>
+                        <AlertDialogDescription>
+                            {dict.admin.deleteProviderDesc}
+                        </AlertDialogDescription>
+                    </AlertDialogHeader>
+                    <AlertDialogFooter>
+                        <AlertDialogCancel>
+                            {dict.admin.cancel}
+                        </AlertDialogCancel>
+                        <AlertDialogAction
+                            className="bg-destructive text-destructive-foreground hover:bg-destructive/90"
+                            onClick={() => {
+                                setDeleteOpen(false)
+                                onDelete()
+                            }}
+                        >
+                            {dict.admin.delete}
+                        </AlertDialogAction>
+                    </AlertDialogFooter>
+                </AlertDialogContent>
+            </AlertDialog>
+        </div>
+    )
+}
+
+export function ModelsSection({
+    providers,
+    envProviders,
+    disabled,
+    password,
+    onChange,
+}: {
+    providers: AdminProvider[]
+    envProviders: EnvProvider[]
+    disabled: boolean
+    password: string
+    onChange: (providers: AdminProvider[]) => void
+}) {
+    const dict = useDictionary()
+    const [selectedId, setSelectedId] = useState<string | null>(
+        providers[0]?.id ?? null,
+    )
+    const selected = providers.find((p) => p.id === selectedId)
+    const selectedEnv = envProviders.find((p) => `env:${p.name}` === selectedId)
+
+    const addProvider = (provider: ProviderName) => {
+        const newProvider: AdminProvider = {
+            id: crypto.randomUUID(),
+            provider,
+            models: [],
+            isDefault: providers.length === 0,
+        }
+        onChange([...providers, newProvider])
+        setSelectedId(newProvider.id)
+    }
+
+    const updateProvider = (id: string, patch: Partial<AdminProvider>) => {
+        onChange(
+            providers.map((p) => {
+                if (p.id !== id) {
+                    // Only one default at a time
+                    return patch.isDefault ? { ...p, isDefault: false } : p
+                }
+                return { ...p, ...patch }
+            }),
+        )
+    }
+
+    const deleteProvider = (id: string) => {
+        const next = providers.filter((p) => p.id !== id)
+        onChange(next)
+        setSelectedId(next[0]?.id ?? null)
+    }
+
+    return (
+        <div className="flex min-h-72 flex-col sm:flex-row">
+            {/* Provider list */}
+            <div className="flex w-full shrink-0 flex-col border-b sm:w-52 sm:border-b-0 sm:border-r">
+                <div className="flex-1 space-y-1 p-2">
+                    {providers.length === 0 && envProviders.length === 0 && (
+                        <p className="px-2 py-6 text-center text-xs text-muted-foreground">
+                            {dict.admin.addProviderHint}
+                        </p>
+                    )}
+                    {envProviders.map((p) => (
+                        <button
+                            key={`env:${p.name}`}
+                            type="button"
+                            onClick={() => setSelectedId(`env:${p.name}`)}
+                            className={cn(
+                                "flex w-full items-center gap-2 rounded-md px-2.5 py-2 text-left text-sm hover:bg-muted/60 focus-visible:outline-none focus-visible:ring-2 focus-visible:ring-ring",
+                                selectedId === `env:${p.name}` &&
+                                    "bg-muted font-medium",
+                            )}
+                        >
+                            <ProviderLogo provider={p.provider} />
+                            <span className="min-w-0 flex-1 truncate">
+                                {p.name}
+                            </span>
+                            <span className="rounded bg-muted px-1 py-0.5 text-[10px] font-medium uppercase text-muted-foreground">
+                                {dict.admin.sourceEnv}
+                            </span>
+                            {p.isDefault && (
+                                <Star
+                                    className="h-3.5 w-3.5 shrink-0 fill-amber-400 text-amber-400"
+                                    aria-label={dict.admin.defaultProvider}
+                                />
+                            )}
+                        </button>
+                    ))}
+                    {providers.map((p) => (
+                        <button
+                            key={p.id}
+                            type="button"
+                            onClick={() => setSelectedId(p.id)}
+                            className={cn(
+                                "flex w-full items-center gap-2 rounded-md px-2.5 py-2 text-left text-sm hover:bg-muted/60 focus-visible:outline-none focus-visible:ring-2 focus-visible:ring-ring",
+                                selectedId === p.id && "bg-muted font-medium",
+                            )}
+                        >
+                            <ProviderLogo provider={p.provider} />
+                            <span className="min-w-0 flex-1 truncate">
+                                {p.name || PROVIDER_INFO[p.provider].label}
+                            </span>
+                            {p.isDefault && (
+                                <Star
+                                    className="h-3.5 w-3.5 shrink-0 fill-amber-400 text-amber-400"
+                                    aria-label={dict.admin.defaultProvider}
+                                />
+                            )}
+                        </button>
+                    ))}
+                </div>
+                <div className="border-t p-2">
+                    <Select
+                        disabled={disabled}
+                        onValueChange={(v) => addProvider(v as ProviderName)}
+                    >
+                        <SelectTrigger className="w-full">
+                            <Plus
+                                className="mr-1 h-4 w-4 text-muted-foreground"
+                                aria-hidden="true"
+                            />
+                            {dict.modelConfig.addProvider}
+                        </SelectTrigger>
+                        <SelectContent className="max-h-72">
+                            {(Object.keys(PROVIDER_INFO) as ProviderName[]).map(
+                                (p) => {
+                                    // Global-credential providers already in
+                                    // the env config can't be added here —
+                                    // panel credentials would override theirs
+                                    const envBlocked =
+                                        FIXED_CRED_PROVIDERS.includes(p) &&
+                                        envProviders.some(
+                                            (e) => e.provider === p,
+                                        )
+                                    return (
+                                        <SelectItem
+                                            key={p}
+                                            value={p}
+                                            disabled={envBlocked}
+                                        >
+                                            <div className="flex items-center gap-2">
+                                                <ProviderLogo provider={p} />
+                                                {PROVIDER_INFO[p].label}
+                                                {envBlocked && (
+                                                    <span className="text-xs text-muted-foreground">
+                                                        {
+                                                            dict.admin
+                                                                .managedViaEnv
+                                                        }
+                                                    </span>
+                                                )}
+                                            </div>
+                                        </SelectItem>
+                                    )
+                                },
+                            )}
+                        </SelectContent>
+                    </Select>
+                </div>
+            </div>
+
+            {/* Detail */}
+            <div className="min-w-0 flex-1 p-4">
+                {selected ? (
+                    <ProviderDetail
+                        key={selected.id}
+                        provider={selected}
+                        disabled={disabled}
+                        password={password}
+                        onUpdate={(patch) => updateProvider(selected.id, patch)}
+                        onDelete={() => deleteProvider(selected.id)}
+                    />
+                ) : selectedEnv ? (
+                    <div className="space-y-4">
+                        <div className="flex items-center gap-3">
+                            <div className="flex h-10 w-10 items-center justify-center rounded-lg bg-muted">
+                                <ProviderLogo
+                                    provider={selectedEnv.provider}
+                                    className="size-5"
+                                />
+                            </div>
+                            <div className="min-w-0 flex-1">
+                                <h3 className="font-semibold">
+                                    {selectedEnv.name}
+                                </h3>
+                                <p className="text-xs text-muted-foreground">
+                                    {dict.admin.envReadOnly}
+                                </p>
+                            </div>
+                        </div>
+                        <div className="overflow-hidden rounded-lg border">
+                            <ul className="divide-y">
+                                {selectedEnv.models.map((modelId, index) => (
+                                    <li
+                                        key={modelId}
+                                        className="flex items-center gap-2 px-3 py-2"
+                                    >
+                                        <span className="min-w-0 flex-1 truncate font-mono text-xs">
+                                            {modelId}
+                                            {selectedEnv.isDefault &&
+                                                index === 0 && (
+                                                    <span className="ml-2 rounded bg-amber-500/10 px-1.5 py-0.5 text-[10px] font-medium uppercase text-amber-600 dark:text-amber-400">
+                                                        {
+                                                            dict.admin
+                                                                .defaultModel
+                                                        }
+                                                    </span>
+                                                )}
+                                        </span>
+                                    </li>
+                                ))}
+                            </ul>
+                        </div>
+                    </div>
+                ) : (
+                    <p className="py-12 text-center text-sm text-muted-foreground">
+                        {dict.admin.selectProviderHint}
+                    </p>
+                )}
+            </div>
+        </div>
+    )
+}

app/[lang]/admin/page.tsx

@@ -0,0 +1,610 @@
+"use client"
+
+import {
+    AlertTriangle,
+    Check,
+    Loader2,
+    LockKeyhole,
+    ShieldCheck,
+} from "lucide-react"
+import { useCallback, useEffect, useState } from "react"
+import { Button } from "@/components/ui/button"
+import { Input } from "@/components/ui/input"
+import { Label } from "@/components/ui/label"
+import { Switch } from "@/components/ui/switch"
+import { useDictionary } from "@/hooks/use-dictionary"
+import {
+    SETTING_GROUPS,
+    SETTINGS_BY_GROUP,
+} from "@/lib/admin/settings-registry"
+import { getApiEndpoint } from "@/lib/base-path"
+import { formatMessage } from "@/lib/i18n/utils"
+import { cn } from "@/lib/utils"
+import {
+    type AdminProvider,
+    adminFetch,
+    type EnvProvider,
+    isSecretValue,
+    SESSION_PASSWORD_KEY,
+    type SettingState,
+    type SettingsMap,
+    savedTextOf,
+} from "./admin-shared"
+import { ModelsSection } from "./models-section"
+import { SettingField } from "./setting-field"
+
+// ── Page ─────────────────────────────────────────────────────────────
+
+const NAV_GROUP_IDS = ["models", ...SETTING_GROUPS.map((g) => g.id)]
+
+export default function AdminPage() {
+    const dict = useDictionary()
+    // Localized group title/description, keyed by group id
+    const groupText = (id: string) =>
+        (
+            dict.admin.groups as Record<
+                string,
+                { title: string; description: string } | undefined
+            >
+        )[id]
+    const navItems = NAV_GROUP_IDS.map((id) => ({
+        id,
+        title:
+            id === "models" ? dict.admin.models : (groupText(id)?.title ?? id),
+    }))
+    const [password, setPassword] = useState("")
+    const [authedPassword, setAuthedPassword] = useState<string | null>(null)
+    const [authError, setAuthError] = useState("")
+    const [authLoading, setAuthLoading] = useState(false)
+
+    const [writable, setWritable] = useState(true)
+
+    // Models section state
+    const [providers, setProviders] = useState<AdminProvider[]>([])
+    const [envProviders, setEnvProviders] = useState<EnvProvider[]>([])
+    const [savedProviders, setSavedProviders] = useState<string>("[]")
+    const providersDirty = JSON.stringify(providers) !== savedProviders
+
+    // General settings state
+    const [settings, setSettings] = useState<SettingsMap>({})
+    const [pending, setPending] = useState<Record<string, string | null>>({})
+    const [errors, setErrors] = useState<Record<string, string>>({})
+    const [enabledGroups, setEnabledGroups] = useState<Record<string, boolean>>(
+        {},
+    )
+
+    const [saving, setSaving] = useState(false)
+    const [saveMessage, setSaveMessage] = useState<{
+        ok: boolean
+        text: string
+    } | null>(null)
+    const [activeGroup, setActiveGroup] = useState("models")
+
+    const dirtyCount = Object.keys(pending).length + (providersDirty ? 1 : 0)
+
+    const applySettingsResponse = useCallback(
+        (data: { writable: boolean; settings: SettingState[] }) => {
+            setWritable(data.writable)
+            const map: SettingsMap = {}
+            for (const s of data.settings) map[s.key] = s
+            setSettings(map)
+            // Seed each toggle once from whether the group has configured
+            // values; don't stomp a user's explicit toggle on later saves
+            setEnabledGroups((prev) => {
+                const next = { ...prev }
+                for (const group of SETTING_GROUPS) {
+                    if (!group.toggleable || group.id in next) continue
+                    next[group.id] = !!SETTINGS_BY_GROUP.get(group.id)?.some(
+                        (d) => map[d.key]?.source !== "default",
+                    )
+                }
+                return next
+            })
+        },
+        [],
+    )
+
+    const applyProvidersResponse = useCallback(
+        (data: {
+            providers: AdminProvider[]
+            envProviders?: EnvProvider[]
+        }) => {
+            setProviders(data.providers)
+            setSavedProviders(JSON.stringify(data.providers))
+            setEnvProviders(data.envProviders ?? [])
+        },
+        [],
+    )
+
+    const login = useCallback(
+        async (pw: string) => {
+            setAuthLoading(true)
+            setAuthError("")
+            try {
+                const [settingsData, providersData] = await Promise.all([
+                    adminFetch("/api/admin/settings", pw),
+                    adminFetch("/api/admin/providers", pw),
+                ])
+                applySettingsResponse(settingsData)
+                applyProvidersResponse(providersData)
+                setAuthedPassword(pw)
+                sessionStorage.setItem(SESSION_PASSWORD_KEY, pw)
+            } catch (err) {
+                setAuthError(
+                    err instanceof Error ? err.message : dict.admin.loginFailed,
+                )
+            } finally {
+                setAuthLoading(false)
+            }
+        },
+        [applySettingsResponse, applyProvidersResponse, dict],
+    )
+
+    // Restore session on mount
+    useEffect(() => {
+        const stored = sessionStorage.getItem(SESSION_PASSWORD_KEY)
+        if (stored) void login(stored)
+    }, [login])
+
+    // Warn before leaving with unsaved changes
+    const hasDirty = dirtyCount > 0
+    useEffect(() => {
+        if (!hasDirty) return
+        const handler = (e: BeforeUnloadEvent) => {
+            e.preventDefault()
+            // Some browsers only show the prompt when returnValue is set
+            e.returnValue = ""
+        }
+        window.addEventListener("beforeunload", handler)
+        return () => window.removeEventListener("beforeunload", handler)
+    }, [hasDirty])
+
+    // Highlight the section currently in view in the sidebar
+    useEffect(() => {
+        if (!authedPassword) return
+        const observer = new IntersectionObserver(
+            (entries) => {
+                const visible = entries
+                    .filter((e) => e.isIntersecting)
+                    .sort(
+                        (a, b) =>
+                            a.boundingClientRect.top - b.boundingClientRect.top,
+                    )
+                if (visible[0]) setActiveGroup(visible[0].target.id)
+            },
+            { rootMargin: "-10% 0px -50% 0px" },
+        )
+        for (const id of NAV_GROUP_IDS) {
+            const el = document.getElementById(id)
+            if (el) observer.observe(el)
+        }
+        return () => observer.disconnect()
+    }, [authedPassword])
+
+    const handleChange = useCallback(
+        (key: string, value: string | null) => {
+            setSaveMessage(null)
+            setErrors((prev) => {
+                if (!(key in prev)) return prev
+                const next = { ...prev }
+                delete next[key]
+                return next
+            })
+            setPending((prev) => {
+                const state = settings[key]
+                const isRevert =
+                    value !== null &&
+                    state?.source === "file" &&
+                    !isSecretValue(state?.value) &&
+                    value === savedTextOf(state)
+                const isNoop =
+                    value === "" &&
+                    (!state || state.source !== "file") &&
+                    !isSecretValue(state?.value)
+                if (isRevert || isNoop) {
+                    const next = { ...prev }
+                    delete next[key]
+                    return next
+                }
+                return { ...prev, [key]: value === "" ? null : value }
+            })
+        },
+        [settings],
+    )
+
+    // Toggling a group off stages deletion of its saved values so the
+    // feature actually turns off on save; toggling on drops those deletions.
+    const handleGroupToggle = useCallback(
+        (groupId: string, enabled: boolean) => {
+            setSaveMessage(null)
+            setEnabledGroups((prev) => ({ ...prev, [groupId]: enabled }))
+            const keys = (SETTINGS_BY_GROUP.get(groupId) ?? []).map(
+                (d) => d.key,
+            )
+            setPending((prev) => {
+                const next = { ...prev }
+                for (const key of keys) {
+                    if (!enabled) {
+                        // Stage deletion only for values currently set
+                        if (settings[key]?.source !== "default")
+                            next[key] = null
+                    } else if (next[key] === null) {
+                        delete next[key]
+                    }
+                }
+                return next
+            })
+        },
+        [settings],
+    )
+
+    const handleSave = useCallback(async () => {
+        if (!authedPassword || dirtyCount === 0) return
+        setSaving(true)
+        setSaveMessage(null)
+        setErrors({})
+        try {
+            if (providersDirty) {
+                const data = await adminFetch(
+                    "/api/admin/providers",
+                    authedPassword,
+                    { method: "PUT", body: JSON.stringify({ providers }) },
+                )
+                applyProvidersResponse(data)
+            }
+            if (Object.keys(pending).length > 0) {
+                const res = await fetch(getApiEndpoint("/api/admin/settings"), {
+                    method: "PUT",
+                    headers: {
+                        "Content-Type": "application/json",
+                        "x-admin-password": authedPassword,
+                    },
+                    body: JSON.stringify({ values: pending }),
+                })
+                const data = await res.json().catch(() => ({}))
+                if (!res.ok) {
+                    // Per-field validation errors come back as {errors: {...}}
+                    if (data.errors) {
+                        setErrors(data.errors)
+                        const firstKey = Object.keys(data.errors)[0]
+                        document.getElementById(`setting-${firstKey}`)?.focus()
+                        throw new Error(dict.admin.invalidSettings)
+                    }
+                    throw new Error(
+                        data.error || `Request failed (${res.status})`,
+                    )
+                }
+                applySettingsResponse(data)
+                setPending({})
+            }
+            setSaveMessage({
+                ok: true,
+                text: dict.admin.saved,
+            })
+            setTimeout(() => setSaveMessage(null), 4000)
+        } catch (err) {
+            setSaveMessage({
+                ok: false,
+                text:
+                    err instanceof Error ? err.message : dict.admin.saveFailed,
+            })
+        } finally {
+            setSaving(false)
+        }
+    }, [
+        authedPassword,
+        pending,
+        providers,
+        providersDirty,
+        dirtyCount,
+        applySettingsResponse,
+        applyProvidersResponse,
+        dict,
+    ])
+
+    // ── Login screen ─────────────────────────────────────────────────
+    if (!authedPassword) {
+        return (
+            <div className="flex min-h-screen items-center justify-center bg-background p-4">
+                <form
+                    className="w-full max-w-sm space-y-4 rounded-lg border bg-card p-6 shadow-sm"
+                    onSubmit={(e) => {
+                        e.preventDefault()
+                        void login(password)
+                    }}
+                >
+                    <div className="flex items-center gap-2">
+                        <LockKeyhole
+                            className="h-5 w-5 text-muted-foreground"
+                            aria-hidden="true"
+                        />
+                        <h1 className="text-lg font-semibold">
+                            {dict.admin.title}
+                        </h1>
+                    </div>
+                    <p className="text-sm text-muted-foreground">
+                        {dict.admin.loginPrompt}
+                    </p>
+                    <div className="space-y-1.5">
+                        <Label htmlFor="admin-password">
+                            {dict.admin.password}
+                        </Label>
+                        <Input
+                            id="admin-password"
+                            name="admin-password"
+                            type="password"
+                            value={password}
+                            autoComplete="current-password"
+                            spellCheck={false}
+                            onChange={(e) => setPassword(e.target.value)}
+                        />
+                    </div>
+                    <p
+                        className={cn(
+                            "text-sm text-destructive",
+                            !authError && "sr-only",
+                        )}
+                        aria-live="polite"
+                    >
+                        {authError}
+                    </p>
+                    <Button
+                        type="submit"
+                        className="w-full"
+                        disabled={authLoading}
+                    >
+                        {authLoading ? (
+                            <>
+                                <Loader2
+                                    className="mr-2 h-4 w-4 animate-spin motion-reduce:animate-none"
+                                    aria-hidden="true"
+                                />
+                                {dict.admin.signingIn}
+                            </>
+                        ) : (
+                            dict.admin.signIn
+                        )}
+                    </Button>
+                </form>
+            </div>
+        )
+    }
+
+    // ── Settings screen ──────────────────────────────────────────────
+    return (
+        <div className="min-h-screen bg-background">
+            <header className="sticky top-0 z-20 border-b bg-background/95 backdrop-blur">
+                <div className="mx-auto flex max-w-6xl items-center justify-between px-4 py-3">
+                    <div className="flex items-center gap-2">
+                        <ShieldCheck
+                            className="h-5 w-5 text-primary"
+                            aria-hidden="true"
+                        />
+                        <h1 className="text-lg font-semibold">
+                            {dict.admin.title}
+                        </h1>
+                    </div>
+                    <p className="text-xs text-muted-foreground">
+                        {dict.admin.precedence}
+                    </p>
+                </div>
+            </header>
+
+            {!writable && (
+                <div className="border-b bg-amber-500/10">
+                    <div className="mx-auto flex max-w-6xl items-center gap-2 px-4 py-3 text-sm text-amber-700 dark:text-amber-400">
+                        <AlertTriangle
+                            className="h-4 w-4 shrink-0"
+                            aria-hidden="true"
+                        />
+                        {dict.admin.notWritable}
+                    </div>
+                </div>
+            )}
+
+            <div className="mx-auto flex max-w-6xl gap-8 px-4 py-6">
+                <nav
+                    aria-label={dict.admin.settingGroups}
+                    className="sticky top-20 hidden h-fit w-44 shrink-0 md:block"
+                >
+                    <ul className="space-y-1">
+                        {navItems.map((item) => (
+                            <li key={item.id}>
+                                <a
+                                    href={`#${item.id}`}
+                                    aria-current={
+                                        activeGroup === item.id
+                                            ? "true"
+                                            : undefined
+                                    }
+                                    className={cn(
+                                        "block rounded-md px-3 py-1.5 text-sm hover:bg-muted hover:text-foreground focus-visible:outline-none focus-visible:ring-2 focus-visible:ring-ring",
+                                        activeGroup === item.id
+                                            ? "bg-muted font-medium text-foreground"
+                                            : "text-muted-foreground",
+                                    )}
+                                >
+                                    {item.title}
+                                </a>
+                            </li>
+                        ))}
+                    </ul>
+                </nav>
+
+                <main className="min-w-0 flex-1 pb-24">
+                    {/* Models section */}
+                    <section aria-labelledby="models" className="mb-10">
+                        <h2
+                            id="models"
+                            className="scroll-mt-20 text-base font-semibold"
+                        >
+                            {dict.admin.models}
+                        </h2>
+                        <p className="mb-3 mt-1 text-sm text-muted-foreground text-pretty">
+                            {dict.admin.modelsDescription}
+                        </p>
+                        <div className="overflow-hidden rounded-lg border bg-card">
+                            <ModelsSection
+                                providers={providers}
+                                envProviders={envProviders}
+                                disabled={!writable || saving}
+                                password={authedPassword}
+                                onChange={(next) => {
+                                    setSaveMessage(null)
+                                    setProviders(next)
+                                }}
+                            />
+                        </div>
+                    </section>
+
+                    {/* Registry-driven groups */}
+                    {SETTING_GROUPS.map((group) => {
+                        const defs = SETTINGS_BY_GROUP.get(group.id) ?? []
+                        const groupOff =
+                            group.toggleable && !enabledGroups[group.id]
+                        const fieldsDisabled = !writable || saving || !!groupOff
+                        const gt = groupText(group.id)
+                        const title = gt?.title ?? group.title
+                        return (
+                            <section
+                                key={group.id}
+                                aria-labelledby={group.id}
+                                className="mb-10"
+                            >
+                                <div className="flex items-center justify-between gap-4">
+                                    <h2
+                                        id={group.id}
+                                        className="scroll-mt-20 text-base font-semibold"
+                                    >
+                                        {title}
+                                    </h2>
+                                    {group.toggleable && (
+                                        <label
+                                            className={cn(
+                                                "flex cursor-pointer items-center gap-2 rounded-full border px-3 py-1.5 text-xs font-medium transition-colors motion-reduce:transition-none",
+                                                enabledGroups[group.id]
+                                                    ? "border-primary/30 bg-primary/5 text-primary"
+                                                    : "border-border bg-muted/50 text-muted-foreground hover:border-foreground/30 hover:text-foreground",
+                                            )}
+                                        >
+                                            {enabledGroups[group.id]
+                                                ? dict.admin.enabled
+                                                : dict.admin.disabled}
+                                            <Switch
+                                                checked={
+                                                    !!enabledGroups[group.id]
+                                                }
+                                                disabled={!writable || saving}
+                                                aria-label={formatMessage(
+                                                    dict.admin.enableGroup,
+                                                    { group: title },
+                                                )}
+                                                onCheckedChange={(checked) =>
+                                                    handleGroupToggle(
+                                                        group.id,
+                                                        checked,
+                                                    )
+                                                }
+                                            />
+                                        </label>
+                                    )}
+                                </div>
+                                <p className="mb-3 mt-1 text-sm text-muted-foreground text-pretty">
+                                    {gt?.description ?? group.description}
+                                </p>
+                                <div
+                                    className={cn(
+                                        "rounded-lg border bg-card px-4",
+                                        groupOff &&
+                                            "pointer-events-none opacity-50",
+                                    )}
+                                >
+                                    {defs.map((def) => (
+                                        <SettingField
+                                            key={def.key}
+                                            def={def}
+                                            state={settings[def.key]}
+                                            pendingValue={pending[def.key]}
+                                            error={errors[def.key]}
+                                            disabled={fieldsDisabled}
+                                            onChange={(v) =>
+                                                handleChange(def.key, v)
+                                            }
+                                        />
+                                    ))}
+                                </div>
+                            </section>
+                        )
+                    })}
+                </main>
+            </div>
+
+            {/* Always-mounted live region so save results are announced */}
+            <p aria-live="polite" className="sr-only">
+                {saveMessage?.text ?? ""}
+            </p>
+
+            {(dirtyCount > 0 || saveMessage) && (
+                <div className="fixed inset-x-0 bottom-0 z-30 border-t bg-background/95 backdrop-blur">
+                    <div className="mx-auto flex max-w-6xl items-center justify-between gap-4 px-4 py-3">
+                        <p
+                            className={cn(
+                                "flex min-w-0 items-center gap-1.5 truncate text-sm",
+                                saveMessage?.ok
+                                    ? "text-green-600 dark:text-green-400"
+                                    : saveMessage
+                                      ? "text-destructive"
+                                      : "text-muted-foreground",
+                            )}
+                        >
+                            {saveMessage?.ok && (
+                                <Check
+                                    className="h-4 w-4 shrink-0"
+                                    aria-hidden="true"
+                                />
+                            )}
+                            {saveMessage && !saveMessage.ok
+                                ? saveMessage.text
+                                : dirtyCount > 0
+                                  ? dict.admin.unsavedChanges
+                                  : saveMessage?.text}
+                        </p>
+                        {dirtyCount > 0 && (
+                            <div className="flex shrink-0 gap-2">
+                                <Button
+                                    type="button"
+                                    variant="outline"
+                                    disabled={saving}
+                                    onClick={() => {
+                                        setPending({})
+                                        setErrors({})
+                                        setProviders(JSON.parse(savedProviders))
+                                    }}
+                                >
+                                    {dict.admin.discard}
+                                </Button>
+                                <Button
+                                    type="button"
+                                    disabled={saving || !writable}
+                                    onClick={() => void handleSave()}
+                                >
+                                    {saving ? (
+                                        <>
+                                            <Loader2
+                                                className="mr-2 h-4 w-4 animate-spin motion-reduce:animate-none"
+                                                aria-hidden="true"
+                                            />
+                                            {dict.admin.saving}
+                                        </>
+                                    ) : (
+                                        dict.admin.saveChanges
+                                    )}
+                                </Button>
+                            </div>
+                        )}
+                    </div>
+                </div>
+            )}
+        </div>
+    )
+}

app/[lang]/admin/setting-field.tsx

@@ -0,0 +1,312 @@
+import { Eye, EyeOff, X } from "lucide-react"
+import { useState } from "react"
+import { Button } from "@/components/ui/button"
+import { Input } from "@/components/ui/input"
+import { Label } from "@/components/ui/label"
+import {
+    Select,
+    SelectContent,
+    SelectItem,
+    SelectTrigger,
+    SelectValue,
+} from "@/components/ui/select"
+import { Switch } from "@/components/ui/switch"
+import { useDictionary } from "@/hooks/use-dictionary"
+import type { SettingDef } from "@/lib/admin/settings-registry"
+import { formatMessage } from "@/lib/i18n/utils"
+import { cn } from "@/lib/utils"
+import {
+    isSecretValue,
+    type SecretValue,
+    type SettingState,
+    savedTextOf,
+} from "./admin-shared"
+
+// ── Small shared UI bits ─────────────────────────────────────────────
+
+export function SourceChip({ source }: { source: "file" | "env" | "default" }) {
+    const dict = useDictionary()
+    if (source === "default") return null
+    return (
+        <span
+            className={cn(
+                "rounded px-1.5 py-0.5 text-[10px] font-medium uppercase tracking-wide",
+                source === "file"
+                    ? "bg-primary/10 text-primary"
+                    : "bg-muted text-muted-foreground",
+            )}
+            title={
+                source === "file"
+                    ? dict.admin.sourceSavedTitle
+                    : dict.admin.sourceEnvTitle
+            }
+        >
+            {source === "file" ? dict.admin.sourceSaved : dict.admin.sourceEnv}
+        </span>
+    )
+}
+
+export function RestartBadge() {
+    const dict = useDictionary()
+    return (
+        <span className="rounded bg-amber-500/10 px-1.5 py-0.5 text-[10px] font-medium uppercase tracking-wide text-amber-600 dark:text-amber-400">
+            {dict.admin.restartRequired}
+        </span>
+    )
+}
+
+// Secret input: shows masked hint as placeholder, typing replaces.
+// With keepOnEmpty, clearing the field reverts to the stored value
+// ("keep") instead of deleting it — explicit deletion is via the X button.
+export function SecretInput({
+    id,
+    value,
+    disabled,
+    keepOnEmpty,
+    onChange,
+}: {
+    id: string
+    value: string | SecretValue | undefined
+    disabled?: boolean
+    keepOnEmpty?: boolean
+    onChange: (value: string | SecretValue) => void
+}) {
+    const dict = useDictionary()
+    const [show, setShow] = useState(false)
+    // The stored marker as it was at mount, to revert to on empty
+    const [original] = useState(value)
+    const hadStored = isSecretValue(original)
+    const text = typeof value === "string" ? value : ""
+    const placeholder = isSecretValue(value)
+        ? formatMessage(dict.admin.savedReplace, { hint: value.hint })
+        : dict.admin.notSet
+    const handleText = (t: string) => {
+        if (t === "" && keepOnEmpty && hadStored && original) {
+            onChange(original)
+        } else {
+            onChange(t)
+        }
+    }
+    return (
+        <div className="flex items-center gap-1">
+            <Input
+                id={id}
+                type={show ? "text" : "password"}
+                value={text}
+                disabled={disabled}
+                spellCheck={false}
+                autoComplete="off"
+                placeholder={placeholder}
+                className="h-9 font-mono text-xs"
+                onChange={(e) => handleText(e.target.value)}
+            />
+            <Button
+                type="button"
+                variant="ghost"
+                size="icon"
+                className="shrink-0"
+                aria-label={show ? dict.admin.hideValue : dict.admin.showValue}
+                onClick={() => setShow((s) => !s)}
+            >
+                {show ? (
+                    <EyeOff className="h-4 w-4" aria-hidden="true" />
+                ) : (
+                    <Eye className="h-4 w-4" aria-hidden="true" />
+                )}
+            </Button>
+            {keepOnEmpty && (hadStored || text) && !disabled && (
+                <Button
+                    type="button"
+                    variant="ghost"
+                    size="icon"
+                    className="shrink-0"
+                    aria-label={dict.admin.removeValue}
+                    title={dict.admin.removeValueTitle}
+                    onClick={() => onChange("")}
+                >
+                    <X className="h-4 w-4" aria-hidden="true" />
+                </Button>
+            )}
+        </div>
+    )
+}
+
+// ── General settings field (registry-driven) ─────────────────────────
+
+export function SettingField({
+    def,
+    state,
+    pendingValue,
+    error,
+    disabled,
+    onChange,
+}: {
+    def: SettingDef
+    state: SettingState | undefined
+    pendingValue: string | null | undefined
+    error?: string
+    disabled: boolean
+    onChange: (value: string | null) => void
+}) {
+    const dict = useDictionary()
+    const isDirty = pendingValue !== undefined
+    const source = state?.source ?? "default"
+    const currentValue = isDirty ? (pendingValue ?? "") : savedTextOf(state)
+    const secretState = state && isSecretValue(state.value) ? state.value : null
+
+    // Localized label/description keyed by env var name, falling back to the
+    // registry's English (the registry stays canonical for the server).
+    const t = (
+        dict.admin.settings as Record<
+            string,
+            { label?: string; description?: string } | undefined
+        >
+    )[def.key]
+    const label = t?.label ?? def.label
+    const description = t?.description ?? def.description
+
+    const inputId = `setting-${def.key}`
+    const errorId = `${inputId}-error`
+
+    let control: React.ReactNode
+    switch (def.type) {
+        case "boolean": {
+            // When unset, reflect the built-in runtime default so the toggle
+            // matches actual behavior (e.g. ALLOW_PRIVATE_URLS defaults on).
+            const effective =
+                currentValue !== "" ? currentValue : (def.default ?? "false")
+            // A saved boolean can be cleared back to its env/default value.
+            const canClear =
+                (isDirty && pendingValue !== null) || source === "file"
+            control = (
+                <div className="flex items-center gap-3">
+                    <Switch
+                        id={inputId}
+                        checked={effective === "true"}
+                        disabled={disabled}
+                        onCheckedChange={(checked) =>
+                            onChange(checked ? "true" : "false")
+                        }
+                    />
+                    {canClear && !disabled && (
+                        <Button
+                            type="button"
+                            variant="ghost"
+                            size="sm"
+                            className="h-7 px-2 text-xs text-muted-foreground"
+                            onClick={() => onChange(null)}
+                        >
+                            {dict.admin.resetToDefault}
+                        </Button>
+                    )}
+                </div>
+            )
+            break
+        }
+        case "enum":
+            control = (
+                <Select
+                    value={currentValue || undefined}
+                    disabled={disabled}
+                    onValueChange={onChange}
+                >
+                    <SelectTrigger id={inputId} className="w-full max-w-xs">
+                        <SelectValue placeholder={dict.admin.notSet} />
+                    </SelectTrigger>
+                    <SelectContent>
+                        {def.options?.map((opt) => (
+                            <SelectItem key={opt} value={opt}>
+                                {opt}
+                            </SelectItem>
+                        ))}
+                    </SelectContent>
+                </Select>
+            )
+            break
+        case "secret":
+            control = (
+                <div className="w-full max-w-md">
+                    <SecretInput
+                        id={inputId}
+                        value={
+                            isDirty
+                                ? (pendingValue ?? "")
+                                : (secretState ?? currentValue)
+                        }
+                        disabled={disabled}
+                        onChange={(v) =>
+                            onChange(typeof v === "string" ? v : "")
+                        }
+                    />
+                </div>
+            )
+            break
+        case "number":
+            control = (
+                <Input
+                    id={inputId}
+                    type="number"
+                    inputMode="numeric"
+                    min={def.min}
+                    max={def.max}
+                    value={currentValue}
+                    disabled={disabled}
+                    placeholder={def.placeholder ?? dict.admin.notSet}
+                    className="w-full max-w-xs tabular-nums"
+                    aria-invalid={!!error}
+                    aria-describedby={error ? errorId : undefined}
+                    onChange={(e) => onChange(e.target.value)}
+                />
+            )
+            break
+        default:
+            control = (
+                <Input
+                    id={inputId}
+                    type="text"
+                    value={currentValue}
+                    disabled={disabled}
+                    spellCheck={false}
+                    autoComplete="off"
+                    placeholder={def.placeholder ?? dict.admin.notSet}
+                    className="w-full max-w-md"
+                    aria-invalid={!!error}
+                    aria-describedby={error ? errorId : undefined}
+                    onChange={(e) => onChange(e.target.value)}
+                />
+            )
+    }
+
+    return (
+        <div className="border-b border-border/60 py-4 last:border-b-0">
+            <div className="mb-1.5 flex flex-wrap items-center gap-2">
+                <Label htmlFor={inputId} className="text-sm font-medium">
+                    {label}
+                </Label>
+                <SourceChip source={source} />
+                {def.restartRequired && <RestartBadge />}
+                {isDirty && (
+                    <span className="rounded bg-blue-500/10 px-1.5 py-0.5 text-[10px] font-medium uppercase tracking-wide text-blue-600 dark:text-blue-400">
+                        {dict.admin.modified}
+                    </span>
+                )}
+            </div>
+            {description && (
+                <p className="mb-2 max-w-prose text-xs text-muted-foreground">
+                    {description}
+                </p>
+            )}
+            {control}
+            <p
+                id={errorId}
+                className={cn(
+                    "text-xs text-destructive",
+                    error ? "mt-1.5" : "sr-only",
+                )}
+                aria-live="polite"
+            >
+                {error ?? ""}
+            </p>
+        </div>
+    )
+}

app/[lang]/page.tsx

@@ -10,8 +10,8 @@ import {
     ResizablePanelGroup,
 } from "@/components/ui/resizable"
 import { useDiagram } from "@/contexts/diagram-context"
+import { type DrawioTheme, isDrawioTheme } from "@/lib/drawio-themes"
 import { i18n, type Locale } from "@/lib/i18n/config"
-import { isIndexedDBUsable } from "@/lib/session-storage"
 
 export default function Home() {
     const {
@@ -27,13 +27,11 @@ export default function Home() {
     const currentLang = (pathname.split("/")[1] || i18n.defaultLocale) as Locale
     const [isMobile, setIsMobile] = useState(false)
     const [isChatVisible, setIsChatVisible] = useState(true)
-    const [drawioUi, setDrawioUi] = useState<"min" | "sketch">("min")
+    const [drawioUi, setDrawioUi] = useState<DrawioTheme>("kennedy")
     const [darkMode, setDarkMode] = useState(false)
     const [isLoaded, setIsLoaded] = useState(false)
     const [isDrawioReady, setIsDrawioReady] = useState(false)
     const [isElectron, setIsElectron] = useState(false)
-    const [canPersist, setCanPersist] = useState(false)
-    const [canPersistChecked, setCanPersistChecked] = useState(false)
     const [drawioBaseUrl, setDrawioBaseUrl] = useState(
         process.env.NEXT_PUBLIC_DRAWIO_BASE_URL || "https://embed.diagrams.net",
     )
@@ -56,7 +54,7 @@ export default function Home() {
         }
 
         const savedUi = localStorage.getItem("drawio-theme")
-        if (savedUi === "min" || savedUi === "sketch") {
+        if (isDrawioTheme(savedUi)) {
             setDrawioUi(savedUi)
         }
 
@@ -84,11 +82,6 @@ export default function Home() {
             setDrawioBaseUrl(`${window.location.origin}/drawio/index.html`)
         }
 
-        void (async () => {
-            const usable = await isIndexedDBUsable()
-            setCanPersist(usable)
-            setCanPersistChecked(true)
-        })()
         setIsLoaded(true)
     }, [pathname, router])
 
@@ -97,13 +90,6 @@ export default function Home() {
         onDrawioLoad()
     }, [onDrawioLoad])
 
-    const handleDrawioAutoSave = useCallback(
-        (data: { xml?: string }) => {
-            handleDiagramAutoSave(data)
-        },
-        [handleDiagramAutoSave],
-    )
-
     const handleDarkModeChange = () => {
         const newValue = !darkMode
         setDarkMode(newValue)
@@ -113,10 +99,9 @@ export default function Home() {
         resetDrawioReady()
     }
 
-    const handleDrawioUiChange = () => {
-        const newUi = drawioUi === "min" ? "sketch" : "min"
-        localStorage.setItem("drawio-theme", newUi)
-        setDrawioUi(newUi)
+    const handleDrawioUiChange = (theme: DrawioTheme) => {
+        localStorage.setItem("drawio-theme", theme)
+        setDrawioUi(theme)
         setIsDrawioReady(false)
         resetDrawioReady()
     }
@@ -187,7 +172,7 @@ export default function Home() {
                         }`}
                     >
                         <div className="h-full rounded-xl overflow-hidden shadow-soft-lg border border-border/30 relative">
-                            {isLoaded && canPersistChecked && (
+                            {isLoaded && (
                                 <div
                                     className={`h-full w-full ${isDrawioReady ? "" : "invisible absolute inset-0"}`}
                                 >
@@ -195,28 +180,19 @@ export default function Home() {
                                         key={`${drawioUi}-${darkMode}-${currentLang}-${isElectron}`}
                                         ref={drawioRef}
                                         autosave
-                                        onAutoSave={handleDrawioAutoSave}
+                                        onAutoSave={handleDiagramAutoSave}
                                         onExport={handleDiagramExport}
                                         onLoad={handleDrawioLoad}
                                         baseUrl={drawioBaseUrl}
-                                        configuration={
-                                            canPersist
-                                                ? { confirmExit: false }
-                                                : undefined
-                                        }
                                         urlParameters={{
                                             ui: drawioUi,
                                             spin: false,
                                             libraries: false,
-                                            // Disable modified tracking only when persistence is available
-                                            ...(canPersist && {
-                                                modified: false,
-                                                keepmodified: false,
-                                            }),
                                             saveAndExit: false,
                                             noSaveBtn: true,
                                             noExitBtn: true,
-                                            dark: darkMode,
+                                            dark:
+                                                darkMode || drawioUi === "dark",
                                             lang: currentLang,
                                             // Enable offline mode in Electron to disable external service calls
                                             ...(isElectron && {
@@ -264,7 +240,7 @@ export default function Home() {
                                 isVisible={isChatVisible}
                                 onToggleVisibility={toggleChatPanel}
                                 drawioUi={drawioUi}
-                                onToggleDrawioUi={handleDrawioUiChange}
+                                onDrawioUiChange={handleDrawioUiChange}
                                 darkMode={darkMode}
                                 onToggleDarkMode={handleDarkModeChange}
                                 isMobile={isMobile}

app/api/admin/providers/route.ts

@@ -0,0 +1,89 @@
+import { checkAdminAuth } from "@/lib/admin/auth"
+import {
+    AdminProvidersSchema,
+    deriveEnvUpdates,
+    loadAdminProviders,
+    maskAdminProviders,
+    mergeSecrets,
+    validateAdminProviders,
+} from "@/lib/admin/providers"
+import { isSettingsWritable, saveSettings } from "@/lib/admin/settings"
+import { loadEnvServerModelsConfig } from "@/lib/server-model-config"
+
+export const runtime = "nodejs"
+export const dynamic = "force-dynamic"
+
+async function payload() {
+    // Env-based providers (AI_MODELS_CONFIG / ai-models.json) are shown
+    // read-only in the panel; their credentials live in the environment
+    const envConfig = await loadEnvServerModelsConfig()
+    const adminProviders = loadAdminProviders()
+    // A panel default overrides any env default (matches the merge in
+    // loadRawServerModelsConfig), so env stars must reflect that
+    const adminHasDefault = adminProviders.some(
+        (p) => p.isDefault && p.models.length > 0,
+    )
+    return {
+        writable: isSettingsWritable(),
+        providers: maskAdminProviders(adminProviders),
+        envProviders:
+            envConfig?.providers.map((p) => ({
+                name: p.name,
+                provider: p.provider,
+                models: p.models,
+                isDefault: !!p.default && !adminHasDefault,
+            })) ?? [],
+    }
+}
+
+export async function GET(req: Request) {
+    const authError = checkAdminAuth(req)
+    if (authError) return authError
+    return Response.json(await payload())
+}
+
+export async function PUT(req: Request) {
+    const authError = checkAdminAuth(req)
+    if (authError) return authError
+
+    if (!isSettingsWritable()) {
+        return Response.json(
+            {
+                error: "Settings file is not writable on this deployment. Configure via environment variables instead.",
+            },
+            { status: 503 },
+        )
+    }
+
+    let body: unknown
+    try {
+        body = await req.json()
+    } catch {
+        return Response.json({ error: "Invalid JSON body" }, { status: 400 })
+    }
+
+    const parsed = AdminProvidersSchema.safeParse(
+        (body as { providers?: unknown })?.providers,
+    )
+    if (!parsed.success) {
+        return Response.json(
+            {
+                error: `Invalid providers: ${parsed.error.issues[0]?.message ?? "schema mismatch"}`,
+            },
+            { status: 400 },
+        )
+    }
+
+    const stored = loadAdminProviders()
+    const merged = mergeSecrets(parsed.data, stored)
+
+    const envConfig = await loadEnvServerModelsConfig()
+    const validationError = validateAdminProviders(merged, envConfig)
+    if (validationError) {
+        return Response.json({ error: validationError }, { status: 400 })
+    }
+
+    saveSettings(deriveEnvUpdates(merged, stored))
+
+    return Response.json(await payload())
+}

app/api/admin/settings/route.ts

@@ -0,0 +1,126 @@
+import { checkAdminAuth, maskSecret } from "@/lib/admin/auth"
+import {
+    getEnvFallback,
+    getValueSource,
+    isSettingsWritable,
+    loadSettings,
+    saveSettings,
+} from "@/lib/admin/settings"
+import {
+    SETTINGS_BY_KEY,
+    SETTINGS_REGISTRY,
+    type SettingDef,
+} from "@/lib/admin/settings-registry"
+
+export const runtime = "nodejs"
+export const dynamic = "force-dynamic"
+
+function serializeSettings() {
+    const fileValues = loadSettings()
+    return SETTINGS_REGISTRY.map((def) => {
+        const source = getValueSource(def.key)
+        const raw =
+            source === "file"
+                ? fileValues[def.key]
+                : (getEnvFallback(def.key) ?? null)
+        const value = def.type === "secret" && raw ? maskSecret(raw) : raw
+        return { key: def.key, source, value }
+    })
+}
+
+export async function GET(req: Request) {
+    const authError = checkAdminAuth(req)
+    if (authError) return authError
+
+    return Response.json({
+        writable: isSettingsWritable(),
+        settings: serializeSettings(),
+    })
+}
+
+function validateValue(def: SettingDef, value: string): string | null {
+    switch (def.type) {
+        case "number": {
+            const num = Number(value)
+            if (!Number.isFinite(num)) return "Must be a number"
+            if (def.min !== undefined && num < def.min)
+                return `Must be at least ${def.min}`
+            if (def.max !== undefined && num > def.max)
+                return `Must be at most ${def.max}`
+            return null
+        }
+        case "boolean":
+            return value === "true" || value === "false"
+                ? null
+                : 'Must be "true" or "false"'
+        case "enum":
+            return def.options?.includes(value)
+                ? null
+                : `Must be one of: ${def.options?.join(", ")}`
+        default:
+            return null
+    }
+}
+
+export async function PUT(req: Request) {
+    const authError = checkAdminAuth(req)
+    if (authError) return authError
+
+    if (!isSettingsWritable()) {
+        return Response.json(
+            {
+                error: "Settings file is not writable on this deployment. Configure via environment variables instead.",
+            },
+            { status: 503 },
+        )
+    }
+
+    let body: { values?: Record<string, unknown> }
+    try {
+        body = await req.json()
+    } catch {
+        return Response.json({ error: "Invalid JSON body" }, { status: 400 })
+    }
+    if (!body.values || typeof body.values !== "object") {
+        return Response.json(
+            { error: "Body must contain a values object" },
+            { status: 400 },
+        )
+    }
+
+    const updates: Record<string, string | null> = {}
+    const errors: Record<string, string> = {}
+
+    for (const [key, value] of Object.entries(body.values)) {
+        const def = SETTINGS_BY_KEY.get(key)
+        if (!def) {
+            errors[key] = "Unknown setting"
+            continue
+        }
+        if (value === null || value === "") {
+            updates[key] = null
+            continue
+        }
+        if (typeof value !== "string") {
+            errors[key] = "Value must be a string"
+            continue
+        }
+        const error = validateValue(def, value)
+        if (error) {
+            errors[key] = error
+            continue
+        }
+        updates[key] = value
+    }
+
+    if (Object.keys(errors).length > 0) {
+        return Response.json({ errors }, { status: 400 })
+    }
+
+    saveSettings(updates)
+
+    return Response.json({
+        writable: true,
+        settings: serializeSettings(),
+    })
+}

app/api/admin/test-model/route.ts

@@ -0,0 +1,66 @@
+import { POST as validateModel } from "@/app/api/validate-model/route"
+import { checkAdminAuth } from "@/lib/admin/auth"
+import {
+    AdminProviderSchema,
+    loadAdminProviders,
+    mergeSecrets,
+} from "@/lib/admin/providers"
+
+export const runtime = "nodejs"
+export const dynamic = "force-dynamic"
+
+// Test a model with the client's CURRENT provider state (which may be
+// unsaved). Secret fields arrive either as plaintext (newly typed) or as
+// masked {isSet} markers, which are resolved against settings.json — so
+// testing works both before and after saving.
+export async function POST(req: Request) {
+    const authError = checkAdminAuth(req)
+    if (authError) return authError
+
+    let body: { provider?: unknown; modelId?: string }
+    try {
+        body = await req.json()
+    } catch {
+        return Response.json({ error: "Invalid JSON body" }, { status: 400 })
+    }
+
+    const parsed = AdminProviderSchema.safeParse(body.provider)
+    if (!parsed.success || !body.modelId) {
+        return Response.json(
+            { valid: false, error: "Invalid provider or model" },
+            { status: 400 },
+        )
+    }
+
+    // SECURITY: a stored secret is only resolved from an {isSet} marker if
+    // the endpoint it would be sent to (provider + baseUrl) still matches
+    // the stored entry. Otherwise a tampered baseUrl could exfiltrate the
+    // stored key to an arbitrary host. Mismatches must re-supply plaintext.
+    const stored = loadAdminProviders().find((p) => p.id === parsed.data.id)
+    const sameEndpoint =
+        stored &&
+        stored.provider === parsed.data.provider &&
+        (stored.baseUrl ?? "") === (parsed.data.baseUrl ?? "") &&
+        (stored.awsRegion ?? "") === (parsed.data.awsRegion ?? "")
+    const [resolved] = mergeSecrets(
+        [parsed.data],
+        sameEndpoint && stored ? [stored] : [],
+    )
+
+    return validateModel(
+        new Request(new URL("/api/validate-model", req.url), {
+            method: "POST",
+            headers: { "Content-Type": "application/json" },
+            body: JSON.stringify({
+                provider: resolved.provider,
+                apiKey: resolved.apiKey,
+                baseUrl: resolved.baseUrl,
+                modelId: body.modelId,
+                awsAccessKeyId: resolved.awsAccessKeyId,
+                awsSecretAccessKey: resolved.awsSecretAccessKey,
+                awsRegion: resolved.awsRegion,
+                vertexApiKey: resolved.vertexApiKey,
+            }),
+        }),
+    )
+}

app/api/aihubmix-models/route.ts

@@ -0,0 +1,61 @@
+import { NextResponse } from "next/server"
+import {
+    AIHUBMIX_MODELS_ENDPOINT,
+    extractAihubmixModelIds,
+} from "@/lib/aihubmix-models"
+import { SUGGESTED_MODELS } from "@/lib/types/model-config"
+
+const SUCCESS_CACHE_CONTROL =
+    "public, max-age=300, s-maxage=3600, stale-while-revalidate=86400"
+
+function fallbackResponse() {
+    return NextResponse.json(
+        {
+            models: SUGGESTED_MODELS.aihubmix || [],
+            source: "fallback",
+        },
+        {
+            headers: {
+                "Cache-Control": "no-store",
+            },
+        },
+    )
+}
+
+export async function GET() {
+    try {
+        const response = await fetch(AIHUBMIX_MODELS_ENDPOINT, {
+            next: { revalidate: 3600 },
+        })
+
+        if (!response.ok) {
+            console.warn(
+                `[aihubmix-models] Failed to fetch models: ${response.status}`,
+            )
+            return fallbackResponse()
+        }
+
+        const payload = await response.json()
+        const models = extractAihubmixModelIds(payload)
+
+        if (models.length === 0) {
+            console.warn("[aihubmix-models] Model list response was empty")
+            return fallbackResponse()
+        }
+
+        return NextResponse.json(
+            {
+                models,
+                source: "aihubmix",
+            },
+            {
+                headers: {
+                    "Cache-Control": SUCCESS_CACHE_CONTROL,
+                },
+            },
+        )
+    } catch (error) {
+        console.warn("[aihubmix-models] Failed to load models:", error)
+        return fallbackResponse()
+    }
+}

app/api/chat/route.ts

@@ -15,7 +15,6 @@ import { z } from "zod"
 import {
     getAIModel,
     SINGLE_SYSTEM_PROVIDERS,
-    supportsImageInput,
     supportsPromptCaching,
 } from "@/lib/ai-providers"
 import { findCachedResponse } from "@/lib/cached-responses"
@@ -35,11 +34,17 @@ import {
     setTraceOutput,
     wrapWithObserve,
 } from "@/lib/langfuse"
+import {
+    resolveMaxOutputTokens,
+    withOutputTokenLimitFallback,
+} from "@/lib/output-token-limit"
 import { findServerModelById } from "@/lib/server-model-config"
 import { getSystemPrompt } from "@/lib/system-prompts"
 import { getUserIdFromRequest } from "@/lib/user-id"
 
-export const maxDuration = 120
+// No explicit cap: a reasoning model can spend minutes planning before it emits
+// the tool call, so take whatever the host allows. Vercel's own default is 300s,
+// which is also where Node's response-body timeout on the upstream stream lands.
 
 // Helper function to create cached stream response
 function createCachedStreamResponse(xml: string): Response {
@@ -242,13 +247,22 @@ async function handleChatRequest(req: Request): Promise<Response> {
 
     // Get AI model with optional client overrides
     const {
-        model,
+        model: baseModel,
         providerOptions,
         headers,
         modelId,
         provider: resolvedProvider,
     } = getAIModel(clientOverrides)
 
+    // Retry with a smaller budget if the provider rejects the requested one
+    const model = withOutputTokenLimitFallback(baseModel)
+
+    // User setting wins over server env, so desktop users can raise it themselves
+    const maxOutputTokens = resolveMaxOutputTokens(
+        req.headers.get("x-max-output-tokens"),
+    )
+    console.log(`[maxOutputTokens] ${maxOutputTokens}`)
+
     // Check if model supports prompt caching
     const shouldCache = supportsPromptCaching(modelId)
     console.log(
@@ -266,16 +280,10 @@ async function handleChatRequest(req: Request): Promise<Response> {
         lastUserMessage?.parts?.filter((part: any) => part.type === "file") ||
         []
 
-    // Check if user is sending images to a model that doesn't support them
-    // AI SDK silently drops unsupported parts, so we need to catch this early
-    if (fileParts.length > 0 && !supportsImageInput(modelId)) {
-        return Response.json(
-            {
-                error: `The model "${modelId}" does not support image input. Please use a vision-capable model (e.g., GPT-4o, Claude, Gemini) or remove the image.`,
-            },
-            { status: 400 },
-        )
-    }
+    // Note: we used to pre-emptively reject images for models we guessed were
+    // text-only (by name matching). That heuristic misfired on newer models
+    // (see issue #874), so we now let the request through and surface the real
+    // provider error if the model genuinely can't accept images.
 
     // User input only - XML is now in a separate cached system message
     const formattedUserInput = `User input:
@@ -500,9 +508,9 @@ IMPORTANT: The "Current diagram XML" is the SINGLE SOURCE OF TRUTH for what's on
     const result = streamText({
         model,
         abortSignal: req.signal,
-        ...(process.env.MAX_OUTPUT_TOKENS && {
-            maxOutputTokens: parseInt(process.env.MAX_OUTPUT_TOKENS, 10),
-        }),
+        // Must be sent: unset means the provider's own default, and Bedrock's is
+        // 4096, enough for a small diagram, so larger ones were cut off mid-attribute.
+        maxOutputTokens,
         stopWhen: stepCountIs(5),
         // Repair truncated tool calls when maxOutputTokens is reached mid-JSON
         experimental_repairToolCall: async ({ toolCall, error }) => {

app/api/parse-url/route.ts

@@ -1,12 +1,37 @@
-import { extract } from "@extractus/article-extractor"
+import { extractFromHtml } from "@extractus/article-extractor"
 import { NextResponse } from "next/server"
 import TurndownService from "turndown"
-import { allowPrivateUrls, isPrivateUrl } from "@/lib/ssrf-protection"
+import { isPrivateUrl } from "@/lib/ssrf-protection"
 
 const MAX_CONTENT_LENGTH = 150000 // Match PDF limit
 const EXTRACT_TIMEOUT_MS = 15000
 const USER_AGENT = "Mozilla/5.0 (compatible; NextAIDrawio/1.0)"
 
+// Detect the page's charset so non-UTF-8 pages (Shift_JIS/GBK/EUC/Big5, common
+// on CJK sites) are decoded correctly. Response.text() always assumes UTF-8 and
+// would produce mojibake; the article-extractor library does the same detection
+// when it fetches the page itself, which we no longer rely on.
+function detectCharset(
+    contentType: string | null,
+    buffer: ArrayBuffer,
+): string {
+    // 1. HTTP Content-Type header charset (most authoritative).
+    const headerCharset = contentType?.match(/charset=([^;]+)/i)?.[1]?.trim()
+    // 2. <meta charset> / <meta http-equiv> in the first bytes of the document.
+    const head = new TextDecoder("utf-8").decode(buffer.slice(0, 4096))
+    const metaCharset =
+        head.match(/<meta[^>]+charset=["']?\s*([\w-]+)/i)?.[1] ||
+        head.match(/<meta[^>]+content=["'][^"']*charset=([\w-]+)/i)?.[1]
+    const charset = (headerCharset || metaCharset || "utf-8").toLowerCase()
+    // TextDecoder throws on unknown encoding labels; fall back to UTF-8.
+    try {
+        new TextDecoder(charset)
+        return charset
+    } catch {
+        return "utf-8"
+    }
+}
+
 export async function POST(req: Request) {
     try {
         const { url } = await req.json()
@@ -28,22 +53,34 @@ export async function POST(req: Request) {
             )
         }
 
-        // SSRF protection
-        if (!allowPrivateUrls && isPrivateUrl(url)) {
+        // SSRF protection: parse-url has no use case for fetching internal
+        // hosts, so private URLs are always rejected. ALLOW_PRIVATE_URLS only
+        // governs LLM provider baseUrl overrides (validate-model, chat).
+        if (await isPrivateUrl(url)) {
             return NextResponse.json(
                 { error: "Cannot access private/internal URLs" },
                 { status: 400 },
             )
         }
-        const headController = new AbortController()
-        const headTimeout = setTimeout(() => headController.abort(), 3000)
+        // Fetch the page ourselves so we control redirect handling. The
+        // article-extractor library follows redirects internally and ignores a
+        // `redirect` option, which would let a public URL 302 to an internal
+        // host and bypass the SSRF check above. `redirect: "error"` rejects any
+        // redirect outright.
+        const controller = new AbortController()
+        const timeoutId = setTimeout(() => {
+            controller.abort()
+        }, EXTRACT_TIMEOUT_MS)
+
+        let html: string
         try {
-            const headResponse = await fetch(url, {
-                method: "HEAD",
+            const response = await fetch(url, {
                 headers: { "User-Agent": USER_AGENT },
-                signal: headController.signal,
+                redirect: "error",
+                signal: controller.signal,
             })
-            const contentType = headResponse.headers.get("content-type")
+
+            const contentType = response.headers.get("content-type")
             if (contentType?.includes("application/pdf")) {
                 return NextResponse.json(
                     {
@@ -52,27 +89,17 @@ export async function POST(req: Request) {
                     { status: 422 },
                 )
             }
-        } catch (err) {
-            console.warn(
-                "HEAD pre-check failed, proceeding with extraction:",
-                err,
-            )
-        } finally {
-            clearTimeout(headTimeout)
-        }
 
-        // Extract article content with timeout to avoid tying up server resources
-        const controller = new AbortController()
-        const timeoutId = setTimeout(() => {
-            controller.abort()
-        }, EXTRACT_TIMEOUT_MS)
+            if (!response.ok) {
+                return NextResponse.json(
+                    { error: "Could not fetch URL content" },
+                    { status: 400 },
+                )
+            }
 
-        let article
-        try {
-            article = await extract(url, undefined, {
-                headers: { "User-Agent": USER_AGENT },
-                signal: controller.signal,
-            })
+            const buffer = await response.arrayBuffer()
+            const charset = detectCharset(contentType, buffer)
+            html = new TextDecoder(charset).decode(buffer)
         } catch (err: any) {
             if (err?.name === "AbortError") {
                 return NextResponse.json(
@@ -80,11 +107,25 @@ export async function POST(req: Request) {
                     { status: 504 },
                 )
             }
-            throw err
+            // Redirects are rejected with a TypeError ("failed to fetch" /
+            // "unexpected redirect") when redirect: "error" is set.
+            return NextResponse.json(
+                { error: "Could not fetch URL content" },
+                { status: 400 },
+            )
         } finally {
             clearTimeout(timeoutId)
         }
 
+        // extractFromHtml throws (not returns null) on empty/non-HTML bodies,
+        // so map any parse error to the same 400 as the no-content case.
+        let article: Awaited<ReturnType<typeof extractFromHtml>>
+        try {
+            article = await extractFromHtml(html, url)
+        } catch {
+            article = null
+        }
+
         if (!article || !article.content) {
             return NextResponse.json(
                 { error: "Could not extract content from URL" },

app/api/validate-model/route.ts

@@ -5,11 +5,16 @@ import { createGateway } from "@ai-sdk/gateway"
 import { createGoogleGenerativeAI } from "@ai-sdk/google"
 import { createVertex } from "@ai-sdk/google-vertex"
 import { createOpenAI } from "@ai-sdk/openai"
+import { createAihubmix } from "@aihubmix/ai-sdk-provider"
 import { createOpenRouter } from "@openrouter/ai-sdk-provider"
 import { generateText } from "ai"
 import { NextResponse } from "next/server"
 import { createOllama } from "ollama-ai-provider-v2"
-import { normalizeMiniMaxBaseURL } from "@/lib/ai-providers"
+import {
+    AIHUBMIX_APP_CODE,
+    isAihubmixStandardBaseURL,
+    normalizeMiniMaxBaseURL,
+} from "@/lib/ai-providers"
 import { allowPrivateUrls, isPrivateUrl } from "@/lib/ssrf-protection"
 import { PROVIDER_INFO, type ProviderName } from "@/lib/types/model-config"
 
@@ -51,7 +56,7 @@ export async function POST(req: Request) {
         }
 
         // SECURITY: Block SSRF attacks via custom baseUrl
-        if (baseUrl && !allowPrivateUrls && isPrivateUrl(baseUrl)) {
+        if (baseUrl && !allowPrivateUrls() && (await isPrivateUrl(baseUrl))) {
             return NextResponse.json(
                 { valid: false, error: "Invalid base URL" },
                 { status: 400 },
@@ -153,6 +158,28 @@ export async function POST(req: Request) {
                 break
             }
 
+            case "aihubmix": {
+                const defaultBaseURL = PROVIDER_INFO.aihubmix.defaultBaseUrl
+
+                if (
+                    isAihubmixStandardBaseURL(baseUrl) ||
+                    baseUrl === defaultBaseURL
+                ) {
+                    const aihubmix = createAihubmix({
+                        apiKey,
+                        appCode: AIHUBMIX_APP_CODE,
+                    })
+                    model = aihubmix(modelId)
+                } else {
+                    const aihubmixCompatible = createOpenAI({
+                        apiKey,
+                        baseURL: baseUrl,
+                    })
+                    model = aihubmixCompatible.chat(modelId)
+                }
+                break
+            }
+
             case "deepseek": {
                 if (baseUrl || apiKey) {
                     const ds = createDeepSeek({
@@ -345,12 +372,14 @@ export async function POST(req: Request) {
                 break
             }
 
-            // GLM, Qwen, Kimi, Qiniu, Novita - OpenAI compatible
+            // GLM, Qwen, Kimi, Qiniu, Novita, MiMo, Atlas Cloud - OpenAI compatible
             case "glm":
             case "qwen":
             case "kimi":
             case "qiniu":
-            case "novita": {
+            case "novita":
+            case "atlascloud":
+            case "mimo": {
                 const baseURL =
                     baseUrl ||
                     PROVIDER_INFO[provider as ProviderName]?.defaultBaseUrl ||

biome.json

@@ -1,12 +1,13 @@
 {
-    "$schema": "https://biomejs.dev/schemas/2.4.4/schema.json",
+    "$schema": "https://biomejs.dev/schemas/2.4.14/schema.json",
     "vcs": {
         "enabled": true,
         "clientKind": "git",
         "useIgnoreFile": true
     },
     "files": {
-        "ignoreUnknown": false
+        "ignoreUnknown": false,
+        "includes": ["**", "!public"]
     },
     "formatter": {
         "enabled": true,

components/chat-panel.tsx

@@ -32,6 +32,7 @@ import { useSessionManager } from "@/hooks/use-session-manager"
 import { useValidateDiagram } from "@/hooks/use-validate-diagram"
 import { getApiEndpoint } from "@/lib/base-path"
 import { findCachedResponse } from "@/lib/cached-responses"
+import type { DrawioTheme } from "@/lib/drawio-themes"
 import { formatMessage } from "@/lib/i18n/utils"
 import { isPdfFile, isTextFile } from "@/lib/pdf-utils"
 import { sanitizeMessages } from "@/lib/session-storage"
@@ -68,8 +69,8 @@ interface ChatMessage {
 interface ChatPanelProps {
     isVisible: boolean
     onToggleVisibility: () => void
-    drawioUi: "min" | "sketch"
-    onToggleDrawioUi: () => void
+    drawioUi: DrawioTheme
+    onDrawioUiChange: (theme: DrawioTheme) => void
     darkMode: boolean
     onToggleDarkMode: () => void
     isMobile?: boolean
@@ -110,7 +111,7 @@ export default function ChatPanel({
     isVisible,
     onToggleVisibility,
     drawioUi,
-    onToggleDrawioUi,
+    onDrawioUiChange,
     darkMode,
     onToggleDarkMode,
     isMobile = false,
@@ -177,6 +178,7 @@ export default function ChatPanel({
     const [minimalStyle, setMinimalStyle] = useState(false)
     const [vlmValidationEnabled, setVlmValidationEnabled] = useState(false)
     const [customSystemMessage, setCustomSystemMessage] = useState("")
+    const [maxOutputTokens, setMaxOutputTokens] = useState("")
     const [shouldFocusInput, setShouldFocusInput] = useState(false)
 
     // Restore input from sessionStorage on mount (when ChatPanel remounts due to key change)
@@ -203,6 +205,14 @@ export default function ChatPanel({
         }
     }, [])
 
+    // Load output token budget from localStorage on mount
+    useEffect(() => {
+        const stored = localStorage.getItem(STORAGE_KEYS.maxOutputTokens)
+        if (stored !== null) {
+            setMaxOutputTokens(stored)
+        }
+    }, [])
+
     // Check config on mount
     useEffect(() => {
         fetch(getApiEndpoint("/api/config"))
@@ -319,6 +329,13 @@ export default function ChatPanel({
         localStorage.setItem(STORAGE_KEYS.customSystemMessage, value)
     }, [])
 
+    // Handler for output token budget change (empty string = use server default)
+    const handleMaxOutputTokensChange = useCallback((value: string) => {
+        const digitsOnly = value.replace(/\D/g, "")
+        setMaxOutputTokens(digitsOnly)
+        localStorage.setItem(STORAGE_KEYS.maxOutputTokens, digitsOnly)
+    }, [])
+
     // Ref to store the sendMessage function for use in callbacks
     const sendMessageRef = useRef<typeof sendMessage | null>(null)
 
@@ -829,10 +846,6 @@ export default function ChatPanel({
                 let chartXml = await onFetchChart()
                 chartXml = formatXML(chartXml)
 
-                // Update ref directly to avoid race condition with React's async state update
-                // This ensures edit_diagram has the correct XML before AI responds
-                chartXMLRef.current = chartXml
-
                 // Build user text by concatenating input with pre-extracted text
                 // (Backend only reads first text part, so we must combine them)
                 const parts: any[] = []
@@ -1107,6 +1120,9 @@ export default function ChatPanel({
                     ...(minimalStyle && {
                         "x-minimal-style": "true",
                     }),
+                    ...(maxOutputTokens && {
+                        "x-max-output-tokens": maxOutputTokens,
+                    }),
                 },
             },
         )
@@ -1442,7 +1458,7 @@ export default function ChatPanel({
                 open={showSettingsDialog}
                 onOpenChange={setShowSettingsDialog}
                 drawioUi={drawioUi}
-                onToggleDrawioUi={onToggleDrawioUi}
+                onDrawioUiChange={onDrawioUiChange}
                 darkMode={darkMode}
                 onToggleDarkMode={onToggleDarkMode}
                 minimalStyle={minimalStyle}
@@ -1451,6 +1467,8 @@ export default function ChatPanel({
                 onVlmValidationChange={handleVlmValidationChange}
                 customSystemMessage={customSystemMessage}
                 onCustomSystemMessageChange={handleCustomSystemMessageChange}
+                maxOutputTokens={maxOutputTokens}
+                onMaxOutputTokensChange={handleMaxOutputTokensChange}
                 onOpenModelConfig={() => setShowModelConfigDialog(true)}
             />
 

components/model-selector.tsx

@@ -158,7 +158,7 @@ export function ModelSelector({
     }, [])
 
     return (
-        <div ref={wrapperRef} className="inline-block">
+        <div ref={wrapperRef} className="min-w-0 max-w-48">
             <ModelSelectorRoot open={open} onOpenChange={setOpen}>
                 <ModelSelectorTrigger asChild>
                     <ButtonWithTooltip
@@ -167,7 +167,7 @@ export function ModelSelector({
                         size="sm"
                         disabled={disabled}
                         className={cn(
-                            "hover:bg-accent gap-1.5 h-8 px-2 transition-[padding,background-color] duration-150 ease-in-out",
+                            "h-8 min-w-0 max-w-full shrink overflow-hidden gap-1.5 px-2 transition-[padding,background-color] duration-150 ease-in-out hover:bg-accent",
                             !showLabel && "px-1.5 justify-center",
                         )}
                         // accessibility: expose label to screen readers
@@ -176,7 +176,7 @@ export function ModelSelector({
                         <Bot className="h-4 w-4 flex-shrink-0 text-muted-foreground" />
                         {/* show/hide visible label based on measured width */}
                         {showLabel ? (
-                            <span className="text-xs truncate">
+                            <span className="min-w-0 truncate text-xs">
                                 {selectedModel
                                     ? selectedModel.modelId
                                     : dict.modelConfig.default}

components/provider-credentials-fields.tsx

@@ -0,0 +1,264 @@
+"use client"
+
+import { Key, Link2, Tag } from "lucide-react"
+import type { ReactNode } from "react"
+import { Input } from "@/components/ui/input"
+import { Label } from "@/components/ui/label"
+import {
+    Select,
+    SelectContent,
+    SelectItem,
+    SelectTrigger,
+    SelectValue,
+} from "@/components/ui/select"
+import { useDictionary } from "@/hooks/use-dictionary"
+import { formatMessage } from "@/lib/i18n/utils"
+import { PROVIDER_INFO, type ProviderName } from "@/lib/types/model-config"
+
+// Logical secret field. The caller owns the actual input — plaintext for the
+// user dialog, write-only masked for the admin panel — supplied via
+// renderSecret. That (and the optional test action) are the only genuine
+// differences between the two screens; the field structure is shared here.
+export type SecretField =
+    | "apiKey"
+    | "awsAccessKeyId"
+    | "awsSecretAccessKey"
+    | "vertexApiKey"
+
+// AWS regions offered for Bedrock (shared by both screens)
+const AWS_REGIONS: Array<[string, string]> = [
+    ["us-east-1", "N. Virginia"],
+    ["us-east-2", "Ohio"],
+    ["us-west-2", "Oregon"],
+    ["eu-west-1", "Ireland"],
+    ["eu-west-2", "London"],
+    ["eu-west-3", "Paris"],
+    ["eu-central-1", "Frankfurt"],
+    ["ap-south-1", "Mumbai"],
+    ["ap-northeast-1", "Tokyo"],
+    ["ap-northeast-2", "Seoul"],
+    ["ap-southeast-1", "Singapore"],
+    ["ap-southeast-2", "Sydney"],
+    ["sa-east-1", "São Paulo"],
+]
+
+interface ProviderCredentialsFieldsProps {
+    provider: ProviderName
+    // Plain (non-secret) field values — secrets are owned by renderSecret
+    name?: string
+    baseUrl?: string
+    awsRegion?: string
+    disabled?: boolean
+    // Update a plain text field
+    onChange: (field: "name" | "baseUrl" | "awsRegion", value: string) => void
+    // Render the control for a secret field. The caller may include trailing
+    // UI (e.g. the user dialog's inline Test button + validation error); the
+    // shared component only supplies the label above it.
+    renderSecret: (opts: { field: SecretField; id: string }) => ReactNode
+    // Extra content after the fields — used for the Bedrock test row and the
+    // EdgeOne test button, which aren't beside a credential input.
+    footer?: ReactNode
+}
+
+// Display name + per-provider credential inputs, shared by the user
+// ModelConfigDialog and the admin Models panel.
+export function ProviderCredentialsFields({
+    provider,
+    name,
+    baseUrl,
+    awsRegion,
+    disabled,
+    onChange,
+    renderSecret,
+    footer,
+}: ProviderCredentialsFieldsProps) {
+    const dict = useDictionary()
+    const info = PROVIDER_INFO[provider]
+    const baseUrlLabel = formatMessage(dict.modelConfig.baseUrlWithExample, {
+        example: info.defaultBaseUrl || "https://api.example.com/v1",
+    })
+
+    // EdgeOne needs no credentials — the caller supplies just a test button
+    if (provider === "edgeone") {
+        return <div className="space-y-5">{footer}</div>
+    }
+
+    return (
+        <div className="space-y-5">
+            {/* Display Name */}
+            <div className="space-y-2">
+                <Label
+                    htmlFor="provider-name"
+                    className="text-xs font-medium flex items-center gap-1.5"
+                >
+                    <Tag className="h-3.5 w-3.5 text-muted-foreground" />
+                    {dict.modelConfig.displayName}
+                </Label>
+                <Input
+                    id="provider-name"
+                    value={name ?? ""}
+                    disabled={disabled}
+                    onChange={(e) => onChange("name", e.target.value)}
+                    placeholder={info.label}
+                    className="h-9"
+                />
+            </div>
+
+            {provider === "bedrock" ? (
+                <>
+                    {/* AWS Access Key ID */}
+                    <div className="space-y-2">
+                        <Label
+                            htmlFor="aws-access-key-id"
+                            className="text-xs font-medium flex items-center gap-1.5"
+                        >
+                            <Key className="h-3.5 w-3.5 text-muted-foreground" />
+                            {dict.modelConfig.awsAccessKeyId}
+                        </Label>
+                        {renderSecret({
+                            field: "awsAccessKeyId",
+                            id: "aws-access-key-id",
+                        })}
+                    </div>
+
+                    {/* AWS Secret Access Key */}
+                    <div className="space-y-2">
+                        <Label
+                            htmlFor="aws-secret-access-key"
+                            className="text-xs font-medium flex items-center gap-1.5"
+                        >
+                            <Key className="h-3.5 w-3.5 text-muted-foreground" />
+                            {dict.modelConfig.awsSecretAccessKey}
+                        </Label>
+                        {renderSecret({
+                            field: "awsSecretAccessKey",
+                            id: "aws-secret-access-key",
+                        })}
+                    </div>
+
+                    {/* AWS Region */}
+                    <div className="space-y-2">
+                        <Label
+                            htmlFor="aws-region"
+                            className="text-xs font-medium flex items-center gap-1.5"
+                        >
+                            <Link2 className="h-3.5 w-3.5 text-muted-foreground" />
+                            {dict.modelConfig.awsRegion}
+                        </Label>
+                        <Select
+                            value={awsRegion || ""}
+                            disabled={disabled}
+                            onValueChange={(v) => onChange("awsRegion", v)}
+                        >
+                            <SelectTrigger
+                                id="aws-region"
+                                className="h-9 font-mono text-xs hover:bg-accent"
+                            >
+                                <SelectValue
+                                    placeholder={dict.modelConfig.selectRegion}
+                                />
+                            </SelectTrigger>
+                            <SelectContent className="max-h-64">
+                                {AWS_REGIONS.map(([region, label]) => (
+                                    <SelectItem key={region} value={region}>
+                                        {region} ({label})
+                                    </SelectItem>
+                                ))}
+                            </SelectContent>
+                        </Select>
+                    </div>
+                </>
+            ) : provider === "vertexai" ? (
+                <>
+                    {/* Vertex AI API Key (Express Mode) */}
+                    <div className="space-y-2">
+                        <Label
+                            htmlFor="vertex-api-key"
+                            className="text-xs font-medium flex items-center gap-1.5"
+                        >
+                            <Key className="h-3.5 w-3.5 text-muted-foreground" />
+                            {dict.modelConfig.apiKey}
+                        </Label>
+                        {renderSecret({
+                            field: "vertexApiKey",
+                            id: "vertex-api-key",
+                        })}
+                    </div>
+
+                    {/* Base URL (optional) */}
+                    <div className="space-y-2">
+                        <Label
+                            htmlFor="vertex-base-url"
+                            className="text-xs font-medium flex items-center gap-1.5"
+                        >
+                            <Link2 className="h-3.5 w-3.5 text-muted-foreground" />
+                            {baseUrlLabel}
+                        </Label>
+                        <Input
+                            id="vertex-base-url"
+                            value={baseUrl ?? ""}
+                            disabled={disabled}
+                            onChange={(e) =>
+                                onChange("baseUrl", e.target.value)
+                            }
+                            placeholder={dict.modelConfig.customEndpoint}
+                            className="h-9 font-mono text-xs"
+                        />
+                    </div>
+                </>
+            ) : (
+                <>
+                    {/* API Key */}
+                    <div className="space-y-2">
+                        <Label
+                            htmlFor="api-key"
+                            className="text-xs font-medium flex items-center gap-1.5"
+                        >
+                            <Key className="h-3.5 w-3.5 text-muted-foreground" />
+                            {dict.modelConfig.apiKey}
+                            {provider === "ollama" &&
+                                ` ${dict.modelConfig.optional}`}
+                        </Label>
+                        {renderSecret({ field: "apiKey", id: "api-key" })}
+                    </div>
+
+                    {/* Base URL */}
+                    <div className="space-y-2">
+                        <Label
+                            htmlFor="base-url"
+                            className="text-xs font-medium flex items-center gap-1.5"
+                        >
+                            <Link2 className="h-3.5 w-3.5 text-muted-foreground" />
+                            {baseUrlLabel}
+                        </Label>
+                        <Input
+                            id="base-url"
+                            value={baseUrl ?? ""}
+                            disabled={disabled}
+                            onChange={(e) =>
+                                onChange("baseUrl", e.target.value)
+                            }
+                            placeholder={
+                                info.defaultBaseUrl ||
+                                dict.modelConfig.customEndpoint
+                            }
+                            className="h-9 rounded-xl font-mono text-xs"
+                        />
+                        {provider === "minimax" && (
+                            <p className="text-xs text-muted-foreground">
+                                {dict.modelConfig.minimaxBaseUrlHint}
+                            </p>
+                        )}
+                        {provider === "mimo" && (
+                            <p className="text-xs text-muted-foreground">
+                                {dict.modelConfig.mimoBaseUrlHint}
+                            </p>
+                        )}
+                    </div>
+                </>
+            )}
+
+            {footer}
+        </div>
+    )
+}

components/provider-logo.tsx

@@ -0,0 +1,36 @@
+import { Cloud, Server, Sparkles } from "lucide-react"
+import { PROVIDER_LOGO_MAP, type ProviderName } from "@/lib/types/model-config"
+import { cn } from "@/lib/utils"
+
+// Provider logo from models.dev, with Lucide fallbacks for providers
+// that have no logo there
+export function ProviderLogo({
+    provider,
+    className,
+}: {
+    provider: ProviderName
+    className?: string
+}) {
+    if (provider === "bedrock") {
+        return <Cloud className={cn("size-4", className)} />
+    }
+    if (provider === "sglang") {
+        return <Server className={cn("size-4", className)} />
+    }
+    if (provider === "doubao") {
+        return <Sparkles className={cn("size-4", className)} />
+    }
+
+    const logoName = PROVIDER_LOGO_MAP[provider] || provider
+    return (
+        // biome-ignore lint/performance/noImgElement: External URL from models.dev
+        <img
+            alt=""
+            aria-hidden="true"
+            className={cn("size-4 dark:invert", className)}
+            height={16}
+            src={`https://models.dev/logos/${logoName}.svg`}
+            width={16}
+        />
+    )
+}

components/settings-dialog.tsx

@@ -25,6 +25,7 @@ import { Switch } from "@/components/ui/switch"
 import { Textarea } from "@/components/ui/textarea"
 import { useDictionary } from "@/hooks/use-dictionary"
 import { getApiEndpoint } from "@/lib/base-path"
+import type { DrawioTheme } from "@/lib/drawio-themes"
 import { i18n, type Locale } from "@/lib/i18n/config"
 import { STORAGE_KEYS } from "@/lib/storage"
 
@@ -63,8 +64,8 @@ const LANGUAGE_LABELS: Record<Locale, string> = {
 interface SettingsDialogProps {
     open: boolean
     onOpenChange: (open: boolean) => void
-    drawioUi: "min" | "sketch"
-    onToggleDrawioUi: () => void
+    drawioUi: DrawioTheme
+    onDrawioUiChange: (theme: DrawioTheme) => void
     darkMode: boolean
     onToggleDarkMode: () => void
     minimalStyle?: boolean
@@ -74,6 +75,8 @@ interface SettingsDialogProps {
     onOpenModelConfig?: () => void
     customSystemMessage?: string
     onCustomSystemMessageChange?: (value: string) => void
+    maxOutputTokens?: string
+    onMaxOutputTokensChange?: (value: string) => void
 }
 
 export const STORAGE_ACCESS_CODE_KEY = "next-ai-draw-io-access-code"
@@ -90,7 +93,7 @@ function SettingsContent({
     open,
     onOpenChange,
     drawioUi,
-    onToggleDrawioUi,
+    onDrawioUiChange,
     darkMode,
     onToggleDarkMode,
     minimalStyle = false,
@@ -100,6 +103,8 @@ function SettingsContent({
     onOpenModelConfig,
     customSystemMessage = "",
     onCustomSystemMessageChange = () => {},
+    maxOutputTokens = "",
+    onMaxOutputTokensChange = () => {},
 }: SettingsDialogProps) {
     const dict = useDictionary()
     const router = useRouter()
@@ -134,8 +139,11 @@ function SettingsContent({
     const [isApplyingProxy, setIsApplyingProxy] = useState(false)
 
     useEffect(() => {
-        // Only fetch if not cached in localStorage
-        if (getStoredAccessCodeRequired() !== null) return
+        // Re-fetch config whenever the dialog opens to ensure we always show
+        // the access code input if the server requires it. This fixes the case
+        // where a stale localStorage cache (from before ACCESS_CODE_LIST was
+        // configured) would hide the access code input.
+        if (!open) return
 
         fetch(getApiEndpoint("/api/config"))
             .then((res) => {
@@ -151,10 +159,9 @@ function SettingsContent({
                 setAccessCodeRequired(required)
             })
             .catch(() => {
-                // Don't cache on error - allow retry on next mount
-                setAccessCodeRequired(false)
+                // Keep existing cached value on error
             })
-    }, [])
+    }, [open])
 
     // Detect current language from pathname
     useEffect(() => {
@@ -430,23 +437,40 @@ function SettingsContent({
                     {/* Draw.io Style */}
                     <SettingItem
                         label={dict.settings.drawioStyle}
-                        description={`${dict.settings.drawioStyleDescription} ${
-                            drawioUi === "min"
-                                ? dict.settings.minimal
-                                : dict.settings.sketch
-                        }`}
+                        description={dict.settings.drawioStyleDescription}
                     >
-                        <Button
-                            id="drawio-ui"
-                            variant="outline"
-                            onClick={onToggleDrawioUi}
-                            className="h-9 w-[120px] rounded-xl border-border-subtle hover:bg-interactive-hover font-normal"
+                        <Select
+                            value={drawioUi}
+                            onValueChange={(v) =>
+                                onDrawioUiChange(v as DrawioTheme)
+                            }
                         >
-                            {dict.settings.switchTo}{" "}
-                            {drawioUi === "min"
-                                ? dict.settings.sketch
-                                : dict.settings.minimal}
-                        </Button>
+                            <SelectTrigger
+                                id="drawio-ui-select"
+                                aria-label={dict.settings.drawioStyle}
+                                className="w-[120px] h-9 rounded-xl"
+                            >
+                                <SelectValue />
+                            </SelectTrigger>
+                            <SelectContent>
+                                <SelectItem value="kennedy">
+                                    {dict.settings.themeDefault}
+                                </SelectItem>
+                                <SelectItem value="atlas">Atlas</SelectItem>
+                                <SelectItem value="dark">
+                                    {dict.settings.themeDark}
+                                </SelectItem>
+                                <SelectItem value="min">
+                                    {dict.settings.themeMinimal}
+                                </SelectItem>
+                                <SelectItem value="sketch">
+                                    {dict.settings.themeSketch}
+                                </SelectItem>
+                                <SelectItem value="simple">
+                                    {dict.settings.themeSimple}
+                                </SelectItem>
+                            </SelectContent>
+                        </Select>
                     </SettingItem>
 
                     {/* Diagram Style */}
@@ -571,6 +595,24 @@ function SettingsContent({
                         />
                     </div>
 
+                    {/* Max Output Tokens */}
+                    <SettingItem
+                        label={dict.settings.maxOutputTokens}
+                        description={dict.settings.maxOutputTokensDescription}
+                    >
+                        <Input
+                            id="max-output-tokens"
+                            type="text"
+                            inputMode="numeric"
+                            value={maxOutputTokens}
+                            onChange={(e) =>
+                                onMaxOutputTokensChange(e.target.value)
+                            }
+                            placeholder="64000"
+                            className="h-9 w-28 text-sm"
+                        />
+                    </SettingItem>
+
                     {/* Send Shortcut */}
                     <SettingItem
                         label={dict.settings.sendShortcut}

contexts/diagram-context.tsx

@@ -2,7 +2,7 @@
 
 import type React from "react"
 import { createContext, useContext, useEffect, useRef, useState } from "react"
-import type { DrawIoEmbedRef } from "react-drawio"
+import type { DrawIoEmbedRef, EventExport } from "react-drawio"
 import { toast } from "sonner"
 import type { ExportFormat } from "@/components/save-dialog"
 import { getApiEndpoint } from "@/lib/base-path"
@@ -22,7 +22,7 @@ interface DiagramContextType {
     handleExportWithoutHistory: () => void
     resolverRef: React.MutableRefObject<((value: string) => void) | null>
     drawioRef: React.MutableRefObject<DrawIoEmbedRef | null>
-    handleDiagramExport: (data: any) => void
+    handleDiagramExport: (data: EventExport) => void
     handleDiagramAutoSave: (data: { xml?: string }) => void
     clearDiagram: () => void
     saveDiagramToFile: (
@@ -83,7 +83,7 @@ export function DiagramProvider({ children }: { children: React.ReactNode }) {
 
     // Track if we're expecting an export for file save (stores raw export data)
     const saveResolverRef = useRef<{
-        resolver: ((data: string) => void) | null
+        resolver: ((data: string, fullDiagramXML?: string) => void) | null
         format: ExportFormat | null
     }>({ resolver: null, format: null })
 
@@ -204,7 +204,7 @@ export function DiagramProvider({ children }: { children: React.ReactNode }) {
         return null
     }
 
-    const handleDiagramExport = (data: any) => {
+    const handleDiagramExport = (data: EventExport) => {
         // Handle PNG export for VLM validation
         if (pngResolverRef.current && data.data?.startsWith("data:image/png")) {
             pngResolverRef.current(data.data)
@@ -215,7 +215,7 @@ export function DiagramProvider({ children }: { children: React.ReactNode }) {
         // Handle save to file if requested (process raw data before extraction)
         if (saveResolverRef.current.resolver) {
             const format = saveResolverRef.current.format
-            saveResolverRef.current.resolver(data.data)
+            saveResolverRef.current.resolver(data.data, data.xml)
             saveResolverRef.current = { resolver: null, format: null }
             // For non-xmlsvg formats, skip XML extraction as it will fail
             // Only drawio (which uses xmlsvg internally) has the content attribute
@@ -225,8 +225,11 @@ export function DiagramProvider({ children }: { children: React.ReactNode }) {
             }
         }
 
+        // Don't write chartXML here: exports don't change the diagram, and
+        // data.xml from xmlsvg exports has compressed <diagram> payloads that
+        // would break edit_diagram/display_diagram. Autosave keeps chartXML
+        // up to date with the full uncompressed multi-page document (#879).
         const extractedXML = extractDiagramXML(data.data)
-        setChartXML(extractedXML)
         setLatestSvg(data.data)
 
         // Only add to history if this was a user-initiated export
@@ -288,14 +291,16 @@ export function DiagramProvider({ children }: { children: React.ReactNode }) {
 
         // Set up the resolver before triggering export
         saveResolverRef.current = {
-            resolver: (exportData: string) => {
+            resolver: (exportData: string, fullDiagramXML?: string) => {
                 let fileContent: string | Blob
                 let mimeType: string
                 let extension: string
 
                 if (format === "drawio") {
-                    // Extract XML from SVG for .drawio format
-                    const xml = extractDiagramXML(exportData)
+                    // Prefer the complete document from the export event so all pages are saved.
+                    const xml = fullDiagramXML?.trim()
+                        ? fullDiagramXML
+                        : extractDiagramXML(exportData)
                     let xmlContent = xml
                     if (!xml.includes("<mxfile")) {
                         xmlContent = `<mxfile><diagram name="Page-1" id="page-1">${xml}</diagram></mxfile>`

docker-compose.yml

@@ -11,6 +11,9 @@ services:
         # - NEXT_PUBLIC_BASE_PATH=/nextaidrawio
     ports: ["3000:3000"]
     env_file: .env
+    volumes:
+      # Persists admin panel settings (data/settings.json)
+      - ./data:/app/data
     # environment:
     #   # For subdirectory deployment, uncomment and set your path:
     #   NEXT_PUBLIC_BASE_PATH: /nextaidrawio

docs/cn/README_CN.md

@@ -204,6 +204,7 @@ npm run dev
 -   Azure OpenAI
 -   Ollama
 -   OpenRouter
+-   AIHubMix
 -   DeepSeek
 -   SiliconFlow
 -   ModelScope
@@ -216,12 +217,18 @@ npm run dev
 
 ### 服务端多模型配置
 
-管理员可以配置多个服务端模型，让所有用户无需提供个人 API Key 即可使用。通过 `AI_MODELS_CONFIG` 环境变量（JSON 字符串）或 `ai-models.json` 文件配置。
+管理员可以配置多个服务端模型，让所有用户无需提供个人 API Key 即可使用。通过 `AI_MODELS_CONFIG` 环境变量（JSON 字符串）或 `ai-models.json` 文件配置。如果只需要单 provider 下的多个模型，也可以直接在 `AI_MODEL` 中用逗号分隔模型 ID。
 
 **模型要求**：此任务需要强大的模型能力，因为它涉及生成具有严格格式约束的长文本（draw.io XML）。推荐使用 Claude Sonnet 4.5、GPT-5.1、Gemini 3 Pro 和 DeepSeek V3.2/R1。
 
 注意：`claude` 系列已在带有 AWS、Azure、GCP 等云架构 Logo 的 draw.io 图表上进行训练，因此如果您想创建云架构图，这是最佳选择。
 
+### 管理面板
+
+设置 `ADMIN_PASSWORD` 环境变量并访问 `/admin`，即可在 Web 面板中管理服务端设置（模型、访问码、功能开关、可观测性、配额），无需手动编辑 `.env`。
+
+📖 **[管理面板指南](./admin-panel.md)** — 启用方法、优先级规则和注意事项。
+
 
 ## 工作原理
 

docs/cn/admin-panel.md

@@ -0,0 +1,24 @@
+# 管理面板
+
+无需手动编辑 `.env`，您可以在 Web 管理面板中管理服务端设置。
+
+## 启用面板
+
+1. 设置 `ADMIN_PASSWORD` 环境变量（不设置则面板禁用）。
+2. 访问 `/admin` 并登录。
+
+## 可配置内容
+
+1. **Models（模型）** — 添加提供商及其 API Key 和模型列表，交互与应用内的模型设置相同。保存后这些模型成为所有用户可用的服务端模型，并在请求时与环境中的 `AI_MODELS_CONFIG` / `ai-models.json` 合并（面板不会修改这些环境文件）。
+2. **其余区块** — 访问码、生成参数、功能开关、可观测性和配额。保存的设置会写入 `data/settings.json` 并立即生效，无需重启（少数设置如 Langfuse 和 DynamoDB 标记为"需要重启"）。
+
+## 优先级
+
+面板中保存的设置覆盖环境变量，环境变量覆盖内置默认值。删除已保存的值会回退到环境变量。
+
+## 注意事项
+
+- 密钥以明文形式存储在 `data/settings.json` 中（文件权限 600），请妥善保管该文件。
+- 在无服务器平台（Vercel、Cloudflare Workers）上没有持久化磁盘，面板为只读 — 请改用环境变量配置。
+- 使用 Docker 时，`data/` 目录通过 `docker-compose.yml` 中的卷持久化。
+- `NEXT_PUBLIC_*` 变量在构建时固化，无法在面板中修改。

docs/cn/ai-providers.md

@@ -46,6 +46,21 @@ AI_MODEL=gpt-4o
 OPENAI_BASE_URL=https://your-custom-endpoint/v1
 ```
 
+### AIHubMix
+
+AIHubMix 通过单个 API Key 聚合 Claude、GPT、Gemini、DeepSeek 等模型。
+
+```bash
+AIHUBMIX_API_KEY=your_api_key
+AI_MODEL=claude-sonnet-4-5-20250929
+```
+
+可选的自定义端点：
+
+```bash
+AIHUBMIX_BASE_URL=https://aihubmix.com/v1
+```
+
 ### Anthropic
 
 ```bash
@@ -53,6 +68,13 @@ ANTHROPIC_API_KEY=your_api_key
 AI_MODEL=claude-sonnet-4-5-20250514
 ```
 
+或者使用 Bearer 认证令牌（例如通过会下发 OAuth 风格 token 的网关时）。`ANTHROPIC_AUTH_TOKEN` 会作为 `Authorization: Bearer <token>` 头发送，而 `ANTHROPIC_API_KEY` 会作为 `x-api-key` 头发送。两者互斥，只能设置其中之一：
+
+```bash
+ANTHROPIC_AUTH_TOKEN=your_auth_token
+AI_MODEL=claude-sonnet-4-5-20250514
+```
+
 可选的自定义端点：
 
 ```bash
@@ -215,7 +237,7 @@ MiniMax 支持两种 API 格式：
 
 ```bash
 MINIMAX_API_KEY=your_api_key
-AI_MODEL=MiniMax-M2.7
+AI_MODEL=MiniMax-M3
 ```
 
 可选配置：
@@ -286,6 +308,19 @@ AI_MODEL=your_model_id
 QINIU_BASE_URL=https://your-custom-endpoint
 ```
 
+### MiMo (小米)
+
+```bash
+MIMO_API_KEY=your_api_key
+AI_MODEL=mimo-v2.5-pro
+```
+
+可选的自定义端点（Token Plan 订阅用户请设置专属 Base URL）：
+
+```bash
+MIMO_BASE_URL=https://token-plan-cn.xiaomimimo.com/v1
+```
+
 ## 自动检测
 
 如果您只配置了**一个**提供商的 API 密钥，系统将自动检测并使用该提供商。无需设置 `AI_PROVIDER`。
@@ -293,7 +328,7 @@ QINIU_BASE_URL=https://your-custom-endpoint
 如果您配置了**多个** API 密钥，则必须显式设置 `AI_PROVIDER`：
 
 ```bash
-AI_PROVIDER=google  # 或：openai, anthropic, deepseek, siliconflow, doubao, azure, bedrock, openrouter, ollama, gateway, sglang, modelscope, minimax, glm, qwen, kimi, qiniu
+AI_PROVIDER=google  # 或：openai, anthropic, aihubmix, deepseek, siliconflow, doubao, azure, bedrock, openrouter, ollama, gateway, sglang, modelscope, minimax, glm, qwen, kimi, qiniu, mimo
 ```
 
 ## 服务端多模型配置
@@ -314,6 +349,17 @@ AI_MODELS_CONFIG='{"providers":[{"name":"OpenAI","provider":"openai","models":["
 
 在项目根目录创建 `ai-models.json` 文件（或通过 `AI_MODELS_CONFIG_PATH` 指定路径）。
 
+**方式三：`AI_MODEL` 用逗号分隔**（单 provider 的快速配置）
+
+如果只需要暴露同一 provider 下的多个模型，可以直接在 `AI_MODEL` 里用逗号分隔。第一个模型会作为默认值。
+
+```bash
+AI_PROVIDER=doubao
+AI_MODEL=doubao-seed-1-8-251215,doubao-seed-1-6-flash,doubao-seed-1-6-pro
+```
+
+这是等价 `ai-models.json` 的简写形式。如果需要配置多个 provider，或自定义 `apiKeyEnv` / `baseUrlEnv`，请使用方式一或方式二。
+
 ### 配置示例
 
 ```json

docs/en/admin-panel.md

@@ -0,0 +1,24 @@
+# Admin Panel
+
+Instead of hand-editing `.env`, you can manage server settings in a web admin panel.
+
+## Enabling the panel
+
+1. Set the `ADMIN_PASSWORD` environment variable (leave unset to disable the panel).
+2. Visit `/admin` and sign in.
+
+## What you can configure
+
+1. **Models** — add providers with their API keys and model lists, using the same UI as the in-app model settings. Saved models become server-side models available to all users, merged with any `AI_MODELS_CONFIG` / `ai-models.json` from your environment at request time (the panel does not modify those env files).
+2. **Other sections** — access codes, generation parameters, features, observability, and quota. Saved settings are written to `data/settings.json` and apply immediately — no restart needed (a few settings such as Langfuse and DynamoDB are marked "Restart Required").
+
+## Precedence
+
+Settings saved in the panel override environment variables, which override built-in defaults. Removing a saved value falls back to the environment variable.
+
+## Notes
+
+- Secrets are stored in plaintext in `data/settings.json` (file mode 600). Keep the file private.
+- On serverless platforms (Vercel, Cloudflare Workers) there is no persistent disk, so the panel is read-only — configure via environment variables there.
+- With Docker, the `data/` directory is persisted via the volume in `docker-compose.yml`.
+- `NEXT_PUBLIC_*` variables are baked in at build time and cannot be changed in the panel.

docs/en/ai-providers.md

@@ -61,6 +61,21 @@ Optional custom endpoint (for OpenAI-compatible services):
 OPENAI_BASE_URL=https://your-custom-endpoint/v1
 ```
 
+### AIHubMix
+
+AIHubMix provides access to Claude, GPT, Gemini, DeepSeek, and other models through a single API key.
+
+```bash
+AIHUBMIX_API_KEY=your_api_key
+AI_MODEL=claude-sonnet-4-5-20250929
+```
+
+Optional custom endpoint:
+
+```bash
+AIHUBMIX_BASE_URL=https://aihubmix.com/v1
+```
+
 ### Anthropic
 
 ```bash
@@ -68,6 +83,13 @@ ANTHROPIC_API_KEY=your_api_key
 AI_MODEL=claude-sonnet-4-5-20250514
 ```
 
+Or use a Bearer auth token instead of an API key (e.g. when going through a gateway that issues OAuth-style tokens). `ANTHROPIC_AUTH_TOKEN` is sent as `Authorization: Bearer <token>`, while `ANTHROPIC_API_KEY` is sent as `x-api-key`. The two are mutually exclusive — set only one:
+
+```bash
+ANTHROPIC_AUTH_TOKEN=your_auth_token
+AI_MODEL=claude-sonnet-4-5-20250514
+```
+
 Optional custom endpoint:
 
 ```bash
@@ -230,7 +252,7 @@ MiniMax supports two API formats:
 
 ```bash
 MINIMAX_API_KEY=your_api_key
-AI_MODEL=MiniMax-M2.7
+AI_MODEL=MiniMax-M3
 ```
 
 Optional configuration:
@@ -301,6 +323,19 @@ Optional custom endpoint:
 QINIU_BASE_URL=https://your-custom-endpoint
 ```
 
+### MiMo (Xiaomi)
+
+```bash
+MIMO_API_KEY=your_api_key
+AI_MODEL=mimo-v2.5-pro
+```
+
+Optional custom endpoint (Token Plan subscribers should set their dedicated Base URL):
+
+```bash
+MIMO_BASE_URL=https://token-plan-cn.xiaomimimo.com/v1
+```
+
 ## Auto-Detection
 
 If you only configure **one** provider's API key, the system will automatically detect and use that provider. No need to set `AI_PROVIDER`.
@@ -308,7 +343,7 @@ If you only configure **one** provider's API key, the system will automatically
 If you configure **multiple** API keys, you must explicitly set `AI_PROVIDER`:
 
 ```bash
-AI_PROVIDER=google  # or: openai, anthropic, deepseek, siliconflow, doubao, azure, bedrock, openrouter, ollama, gateway, sglang, modelscope, minimax, glm, qwen, kimi, qiniu
+AI_PROVIDER=google  # or: openai, anthropic, aihubmix, deepseek, siliconflow, doubao, azure, bedrock, openrouter, ollama, gateway, sglang, modelscope, minimax, glm, qwen, kimi, qiniu, mimo
 ```
 
 ## Server-Side Multi-Model Configuration
@@ -329,6 +364,17 @@ AI_MODELS_CONFIG='{"providers":[{"name":"OpenAI","provider":"openai","models":["
 
 Create an `ai-models.json` file in the project root (or set `AI_MODELS_CONFIG_PATH` to a custom location).
 
+**Option 3: Comma-separated `AI_MODEL`** (quick setup, single provider)
+
+If you only need multiple models from one provider, list them in `AI_MODEL` separated by commas. The first model is treated as the default.
+
+```bash
+AI_PROVIDER=doubao
+AI_MODEL=doubao-seed-1-8-251215,doubao-seed-1-6-flash,doubao-seed-1-6-pro
+```
+
+This is shorthand for the equivalent `ai-models.json`. For multiple providers or custom `apiKeyEnv` / `baseUrlEnv`, use Option 1 or 2 instead.
+
 ### Example Configuration
 
 ```json

docs/ja/README_JA.md

@@ -203,6 +203,7 @@ Next.jsアプリをデプロイする最も簡単な方法は、Next.jsの作成
 -   Azure OpenAI
 -   Ollama
 -   OpenRouter
+-   AIHubMix
 -   DeepSeek
 -   SiliconFlow
 -   ModelScope
@@ -215,12 +216,18 @@ AWS BedrockとOpenRouter以外のすべてのプロバイダーはカスタム
 
 ### サーバーサイドマルチモデル設定
 
-管理者は、ユーザーが個人のAPIキーを提供することなく利用できる複数のサーバーサイドモデルを設定できます。`AI_MODELS_CONFIG` 環境変数（JSON文字列）または `ai-models.json` ファイルで設定します。
+管理者は、ユーザーが個人のAPIキーを提供することなく利用できる複数のサーバーサイドモデルを設定できます。`AI_MODELS_CONFIG` 環境変数（JSON文字列）または `ai-models.json` ファイルで設定します。同一プロバイダー内の複数モデルだけが必要な場合は、`AI_MODEL` にカンマ区切りでモデルIDを列挙する簡易設定も使えます。
 
 **モデル要件**：このタスクは厳密なフォーマット制約（draw.io XML）を持つ長文テキスト生成を伴うため、強力なモデル機能が必要です。Claude Sonnet 4.5、GPT-5.1、Gemini 3 Pro、DeepSeek V3.2/R1を推奨します。
 
 注：`claude`シリーズはAWS、Azure、GCPなどのクラウドアーキテクチャロゴ付きのdraw.ioダイアグラムで学習されているため、クラウドアーキテクチャダイアグラムを作成したい場合は最適な選択です。
 
+### 管理パネル
+
+`ADMIN_PASSWORD` 環境変数を設定して `/admin` にアクセスすると、`.env` を手動で編集する代わりに Web パネルでサーバー設定（モデル、アクセスコード、機能、可観測性、クォータ）を管理できます。
+
+📖 **[管理パネルガイド](./admin-panel.md)** — 有効化の方法、優先順位ルール、注意事項。
+
 
 ## 仕組み
 

docs/ja/admin-panel.md

@@ -0,0 +1,24 @@
+# 管理パネル
+
+`.env` を手動で編集する代わりに、Web 管理パネルでサーバー設定を管理できます。
+
+## パネルの有効化
+
+1. `ADMIN_PASSWORD` 環境変数を設定します（未設定の場合、パネルは無効になります）。
+2. `/admin` にアクセスしてサインインします。
+
+## 設定できる項目
+
+1. **Models（モデル）** — アプリ内のモデル設定と同じ UI で、プロバイダーの API キーとモデルリストを追加します。保存するとそれらは全ユーザーが利用できるサーバーサイドモデルになり、リクエスト時に環境の `AI_MODELS_CONFIG` / `ai-models.json` とマージされます（パネルがこれらの環境ファイルを変更することはありません）。
+2. **その他のセクション** — アクセスコード、生成パラメータ、機能、可観測性、クォータ。保存された設定は `data/settings.json` に書き込まれ、即座に反映されます — 再起動は不要です（Langfuse や DynamoDB など一部の設定は「再起動が必要」と表示されます）。
+
+## 優先順位
+
+パネルで保存された設定は環境変数を上書きし、環境変数は組み込みのデフォルト値を上書きします。保存した値を削除すると環境変数にフォールバックします。
+
+## 注意事項
+
+- シークレットは `data/settings.json` に平文で保存されます（ファイルモード 600）。このファイルは非公開に保ってください。
+- サーバーレスプラットフォーム（Vercel、Cloudflare Workers）には永続ディスクがないため、パネルは読み取り専用です — その環境では環境変数で設定してください。
+- Docker 使用時は、`data/` ディレクトリが `docker-compose.yml` のボリュームで永続化されます。
+- `NEXT_PUBLIC_*` 変数はビルド時に固定され、パネルでは変更できません。

docs/ja/ai-providers.md

@@ -46,6 +46,21 @@ AI_MODEL=gpt-4o
 OPENAI_BASE_URL=https://your-custom-endpoint/v1
 ```
 
+### AIHubMix
+
+AIHubMix は、単一の API キーで Claude、GPT、Gemini、DeepSeek などのモデルへのアクセスを提供します。
+
+```bash
+AIHUBMIX_API_KEY=your_api_key
+AI_MODEL=claude-sonnet-4-5-20250929
+```
+
+任意のカスタムエンドポイント:
+
+```bash
+AIHUBMIX_BASE_URL=https://aihubmix.com/v1
+```
+
 ### Anthropic
 
 ```bash
@@ -53,6 +68,13 @@ ANTHROPIC_API_KEY=your_api_key
 AI_MODEL=claude-sonnet-4-5-20250514
 ```
 
+または、Bearer 認証トークンを使用することもできます（OAuth スタイルのトークンを発行するゲートウェイ経由で利用する場合など）。`ANTHROPIC_AUTH_TOKEN` は `Authorization: Bearer <token>` ヘッダーで送信され、`ANTHROPIC_API_KEY` は `x-api-key` ヘッダーで送信されます。両者は排他的なので、いずれか一方のみを設定してください:
+
+```bash
+ANTHROPIC_AUTH_TOKEN=your_auth_token
+AI_MODEL=claude-sonnet-4-5-20250514
+```
+
 任意のカスタムエンドポイント:
 
 ```bash
@@ -215,7 +237,7 @@ MiniMax は 2 つの API 形式をサポートしています：
 
 ```bash
 MINIMAX_API_KEY=your_api_key
-AI_MODEL=MiniMax-M2.7
+AI_MODEL=MiniMax-M3
 ```
 
 オプション設定：
@@ -286,6 +308,19 @@ AI_MODEL=your_model_id
 QINIU_BASE_URL=https://your-custom-endpoint
 ```
 
+### MiMo (Xiaomi)
+
+```bash
+MIMO_API_KEY=your_api_key
+AI_MODEL=mimo-v2.5-pro
+```
+
+オプションのカスタムエンドポイント（Token Plan 加入者は専用の Base URL を設定してください）：
+
+```bash
+MIMO_BASE_URL=https://token-plan-cn.xiaomimimo.com/v1
+```
+
 ## 自動検出
 
 **1つ**のプロバイダーの API キーのみを設定した場合、システムはそのプロバイダーを自動的に検出して使用します。`AI_PROVIDER` を設定する必要はありません。
@@ -293,7 +328,7 @@ QINIU_BASE_URL=https://your-custom-endpoint
 **複数**の API キーを設定する場合は、`AI_PROVIDER` を明示的に設定する必要があります:
 
 ```bash
-AI_PROVIDER=google  # または: openai, anthropic, deepseek, siliconflow, doubao, azure, bedrock, openrouter, ollama, gateway, sglang, modelscope, minimax, glm, qwen, kimi, qiniu
+AI_PROVIDER=google  # または: openai, anthropic, aihubmix, deepseek, siliconflow, doubao, azure, bedrock, openrouter, ollama, gateway, sglang, modelscope, minimax, glm, qwen, kimi, qiniu, mimo
 ```
 
 ## サーバーサイドマルチモデル設定
@@ -314,6 +349,17 @@ AI_MODELS_CONFIG='{"providers":[{"name":"OpenAI","provider":"openai","models":["
 
 プロジェクトルートに `ai-models.json` ファイルを作成します（または `AI_MODELS_CONFIG_PATH` でパスを指定）。
 
+**方法3：`AI_MODEL` をカンマ区切りで指定**（単一プロバイダーの簡易設定）
+
+同一プロバイダー内の複数モデルだけを公開したい場合は、`AI_MODEL` にカンマ区切りで列挙できます。最初のモデルがデフォルトになります。
+
+```bash
+AI_PROVIDER=doubao
+AI_MODEL=doubao-seed-1-8-251215,doubao-seed-1-6-flash,doubao-seed-1-6-pro
+```
+
+これは等価な `ai-models.json` の簡易表記です。複数のプロバイダーや、カスタム `apiKeyEnv` / `baseUrlEnv` を使う場合は、方法1または方法2を使ってください。
+
 ### 設定例
 
 ```json

electron/electron.d.ts

@@ -101,8 +101,8 @@ declare global {
 }
 
 export type {
-    ConfigPreset,
     ApplyPresetResult,
+    ConfigPreset,
     ProxyConfig,
     SetProxyResult,
     SetUserLocaleResult,

electron/main/window-manager.ts

@@ -60,6 +60,13 @@ export function createWindow(serverUrl: string): BrowserWindow {
         mainWindow.webContents.openDevTools()
     }
 
+    // Override the draw.io iframe's beforeunload handler so the window can
+    // close after the user edits text in a shape (fixes #815). Diagrams are
+    // already persisted via autosave, so the prompt is unnecessary.
+    mainWindow.webContents.on("will-prevent-unload", (event) => {
+        event.preventDefault()
+    })
+
     mainWindow.on("closed", () => {
         mainWindow = null
     })

env.example

@@ -1,12 +1,21 @@
 # AI Provider Configuration
 # AI_PROVIDER: Which provider to use
-# Options: bedrock, openai, anthropic, google, vertexai, azure, ollama, openrouter, deepseek, siliconflow, gateway, novita
+# Options: bedrock, openai, anthropic, google, vertexai, azure, ollama, openrouter, aihubmix, deepseek, siliconflow, gateway, novita
 # Default: bedrock
 AI_PROVIDER=bedrock
 
 # AI_MODEL: The model ID for your chosen provider (REQUIRED)
+# Tip: For a single-provider quick multi-model setup, list comma-separated model IDs.
+# The first one becomes the default and the rest appear in the model picker.
+# For multiple providers or custom apiKeyEnv/baseUrlEnv, use AI_MODELS_CONFIG / ai-models.json instead.
+# Example: AI_MODEL=doubao-seed-1-8-251215,doubao-seed-1-6-flash,doubao-seed-1-6-pro
 AI_MODEL=global.anthropic.claude-sonnet-4-5-20250929-v1:0
 
+# Output limit, all providers (default: 64000). Shared by reasoning and the diagram XML,
+# so a thinking model can spend it all before the tool call. Users can override it in Settings.
+# If a model's own ceiling is lower, the request is retried with that ceiling automatically.
+# MAX_OUTPUT_TOKENS=64000
+
 # AWS Bedrock Configuration
 # AWS_REGION=us-east-1
 # AWS_ACCESS_KEY_ID=your-access-key-id
@@ -25,7 +34,8 @@ AI_MODEL=global.anthropic.claude-sonnet-4-5-20250929-v1:0
 # OPENAI_REASONING_SUMMARY=detailed  # Optional: Override reasoning summary (none/brief/detailed)
 
 # Anthropic (Direct) Configuration
-# ANTHROPIC_API_KEY=sk-ant-...
+# ANTHROPIC_API_KEY=sk-ant-...                 # Sent as `x-api-key` header
+# ANTHROPIC_AUTH_TOKEN=                        # Alternative to ANTHROPIC_API_KEY; sent as `Authorization: Bearer` header (mutually exclusive)
 # ANTHROPIC_BASE_URL=https://your-custom-anthropic/v1
 # ANTHROPIC_THINKING_TYPE=enabled            # Optional: Anthropic extended thinking (enabled)
 # ANTHROPIC_THINKING_BUDGET_TOKENS=12000     # Optional: Budget for extended thinking in tokens
@@ -68,6 +78,10 @@ AI_MODEL=global.anthropic.claude-sonnet-4-5-20250929-v1:0
 # OPENROUTER_API_KEY=sk-or-v1-...
 # OPENROUTER_BASE_URL=https://openrouter.ai/api/v1  # Optional: Custom endpoint
 
+# AIHubMix Configuration
+# AIHUBMIX_API_KEY=your-aihubmix-api-key
+# AIHUBMIX_BASE_URL=https://aihubmix.com/v1  # Optional: Custom endpoint
+
 # DeepSeek Configuration
 # DEEPSEEK_API_KEY=sk-...
 # DEEPSEEK_BASE_URL=https://api.deepseek.com/v1  # Optional: Custom endpoint
@@ -115,6 +129,14 @@ AI_MODEL=global.anthropic.claude-sonnet-4-5-20250929-v1:0
 # Access Control (Optional)
 # ACCESS_CODE_LIST=your-secret-code,another-code
 
+# Admin Panel (Optional)
+# Set a password to enable the web admin panel at /admin, where most of the
+# settings in this file can be edited at runtime (stored in data/settings.json,
+# which takes precedence over environment variables).
+# Leave unset to disable the admin panel entirely.
+# ADMIN_PASSWORD=your-admin-password
+# SETTINGS_FILE=./data/settings.json  # Optional: custom settings file location
+
 # Draw.io Configuration (Optional)
 # NEXT_PUBLIC_DRAWIO_BASE_URL=https://embed.diagrams.net  # Default: https://embed.diagrams.net
 # Use this to point to a self-hosted draw.io instance
@@ -172,3 +194,13 @@ AI_MODEL=global.anthropic.claude-sonnet-4-5-20250929-v1:0
 # Get your API key from: https://novita.ai/dashboard/key
 # NOVITA_API_KEY=your_novita_api_key
 # NOVITA_BASE_URL=https://api.novita.ai/openai  # Optional, default
+
+# MiMo (Xiaomi) Configuration (Optional)
+# Get your API key from: https://platform.xiaomimimo.com/
+# MIMO_API_KEY=your_mimo_api_key
+# MIMO_BASE_URL=https://api.xiaomimimo.com/v1  # Optional, default. Token Plan users: https://token-plan-cn.xiaomimimo.com/v1
+
+# Atlas Cloud Configuration (Optional)
+# Get your API key from: https://www.atlascloud.ai/console/api-keys
+# ATLASCLOUD_API_KEY=your_atlascloud_api_key
+# ATLASCLOUD_BASE_URL=https://api.atlascloud.ai/v1  # Optional, default. LLM chat endpoint; media generation uses a separate API.

instrumentation.ts

@@ -1,7 +1,17 @@
 import { LangfuseSpanProcessor } from "@langfuse/otel"
 import { NodeTracerProvider } from "@opentelemetry/sdk-trace-node"
 
-export function register() {
+export async function register() {
+    // Overlay admin settings file onto process.env before anything reads config
+    if (process.env.NEXT_RUNTIME === "nodejs") {
+        try {
+            const { applyToEnv } = await import("@/lib/admin/settings")
+            applyToEnv()
+        } catch (err) {
+            console.error("[admin-settings] Failed to apply settings:", err)
+        }
+    }
+
     // Skip telemetry if Langfuse env vars are not configured
     if (!process.env.LANGFUSE_PUBLIC_KEY || !process.env.LANGFUSE_SECRET_KEY) {
         console.warn(

lib/admin/auth.ts

@@ -0,0 +1,37 @@
+import { timingSafeEqual } from "crypto"
+
+// Shared auth for admin API routes: compares x-admin-password header
+// against the ADMIN_PASSWORD env var. Unset password = panel disabled.
+export function checkAdminAuth(req: Request): Response | null {
+    const password = process.env.ADMIN_PASSWORD
+    if (!password) {
+        return Response.json(
+            {
+                error: "Admin panel is disabled. Set the ADMIN_PASSWORD environment variable to enable it.",
+            },
+            { status: 403 },
+        )
+    }
+    const provided = req.headers.get("x-admin-password") || ""
+    const a = Buffer.from(provided)
+    const b = Buffer.from(password)
+    if (a.length !== b.length || !timingSafeEqual(a, b)) {
+        return Response.json(
+            { error: "Invalid admin password" },
+            { status: 401 },
+        )
+    }
+    return null
+}
+
+export interface MaskedSecret {
+    isSet: true
+    hint: string
+}
+
+export function maskSecret(value: string): MaskedSecret {
+    return {
+        isSet: true,
+        hint: value.length > 8 ? `…${value.slice(-4)}` : "••••",
+    }
+}

lib/admin/providers.ts

@@ -0,0 +1,303 @@
+import { z } from "zod"
+import {
+    ProviderNameSchema,
+    type ServerModelsConfig,
+} from "@/lib/server-model-config"
+import {
+    FIXED_CRED_PROVIDERS,
+    PROVIDER_INFO,
+    type ProviderName,
+} from "@/lib/types/model-config"
+import { type MaskedSecret, maskSecret } from "./auth"
+import { loadSettings } from "./settings"
+
+// Admin-configured providers, mirroring the user ModelConfigDialog's data
+// model but stored server-side (settings.json, ADMIN_PROVIDERS key).
+//
+// They COEXIST with an env-based AI_MODELS_CONFIG / ai-models.json:
+// loadRawServerModelsConfig() merges the env baseline with the panel's
+// providers at read time, so .env stays authoritative for its own entries.
+// Panel credentials are written to ADMIN_-prefixed env vars (wired up via
+// apiKeyEnv/baseUrlEnv) so they never shadow standard vars like
+// OPENAI_API_KEY that env-based entries may rely on.
+
+export const ADMIN_PROVIDERS_KEY = "ADMIN_PROVIDERS"
+
+// A secret field in transit: plaintext string (new value) or an
+// {isSet} marker meaning "keep the stored value".
+const SecretInputSchema = z
+    .union([z.string(), z.object({ isSet: z.literal(true), hint: z.string() })])
+    .optional()
+
+export const AdminProviderSchema = z.object({
+    id: z.string().min(1),
+    provider: ProviderNameSchema,
+    name: z.string().optional(),
+    apiKey: SecretInputSchema,
+    baseUrl: z.string().optional(),
+    awsAccessKeyId: SecretInputSchema,
+    awsSecretAccessKey: SecretInputSchema,
+    awsRegion: z.string().optional(),
+    vertexApiKey: SecretInputSchema,
+    models: z.array(z.string().min(1)),
+    isDefault: z.boolean().optional(),
+})
+
+export const AdminProvidersSchema = z.array(AdminProviderSchema)
+
+// Stored shape: secrets are plain strings (never {isSet} markers, which
+// only exist in transit). Used to validate ADMIN_PROVIDERS on load so a
+// hand-edited/corrupted value can't slip a marker object past maskSecret.
+const StoredAdminProviderSchema = AdminProviderSchema.extend({
+    apiKey: z.string().optional(),
+    awsAccessKeyId: z.string().optional(),
+    awsSecretAccessKey: z.string().optional(),
+    vertexApiKey: z.string().optional(),
+})
+
+export type AdminProviderInput = z.infer<typeof AdminProviderSchema>
+
+// Stored form: secrets are plain strings
+export interface StoredAdminProvider {
+    id: string
+    provider: ProviderName
+    name?: string
+    apiKey?: string
+    baseUrl?: string
+    awsAccessKeyId?: string
+    awsSecretAccessKey?: string
+    awsRegion?: string
+    vertexApiKey?: string
+    models: string[]
+    isDefault?: boolean
+}
+
+const SECRET_FIELDS = [
+    "apiKey",
+    "awsAccessKeyId",
+    "awsSecretAccessKey",
+    "vertexApiKey",
+] as const
+
+// ADMIN_-prefixed env var names for instance `index` (0-based) of a provider
+function credEnvNames(
+    provider: ProviderName,
+    index: number,
+): { key?: string; url?: string } {
+    if (FIXED_CRED_PROVIDERS.includes(provider) || provider === "edgeone") {
+        return {}
+    }
+    const prefix =
+        provider === "gateway" ? "AI_GATEWAY" : provider.toUpperCase()
+    const suffix = index === 0 ? "" : `_${index + 1}`
+    return {
+        key: `ADMIN_${prefix}_API_KEY${suffix}`,
+        url: `ADMIN_${prefix}_BASE_URL${suffix}`,
+    }
+}
+
+export function loadAdminProviders(): StoredAdminProvider[] {
+    const raw = loadSettings()[ADMIN_PROVIDERS_KEY]
+    if (!raw) return []
+    try {
+        const parsed = JSON.parse(raw)
+        if (!Array.isArray(parsed)) return []
+        // Validate each entry's shape — a malformed/hand-edited value must
+        // not reach runtime code that assumes provider/models exist.
+        return parsed.flatMap((entry) => {
+            const result = StoredAdminProviderSchema.safeParse(entry)
+            return result.success ? [result.data as StoredAdminProvider] : []
+        })
+    } catch {
+        console.error("[admin-providers] Failed to parse stored providers")
+        return []
+    }
+}
+
+export type MaskedAdminProvider = Omit<
+    StoredAdminProvider,
+    (typeof SECRET_FIELDS)[number]
+> & {
+    apiKey?: MaskedSecret
+    awsAccessKeyId?: MaskedSecret
+    awsSecretAccessKey?: MaskedSecret
+    vertexApiKey?: MaskedSecret
+}
+
+export function maskAdminProviders(
+    list: StoredAdminProvider[],
+): MaskedAdminProvider[] {
+    return list.map((p) => {
+        const masked: MaskedAdminProvider = { ...p } as MaskedAdminProvider
+        for (const field of SECRET_FIELDS) {
+            const value = p[field]
+            masked[field] = value ? maskSecret(value) : undefined
+        }
+        return masked
+    })
+}
+
+// Resolve {isSet} markers in incoming secrets against the stored list
+export function mergeSecrets(
+    incoming: AdminProviderInput[],
+    stored: StoredAdminProvider[],
+): StoredAdminProvider[] {
+    const storedById = new Map(stored.map((p) => [p.id, p]))
+    return incoming.map((p) => {
+        const prev = storedById.get(p.id)
+        const merged = { ...p } as StoredAdminProvider
+        for (const field of SECRET_FIELDS) {
+            const value = p[field]
+            if (typeof value === "string") {
+                merged[field] = value || undefined
+            } else if (value?.isSet) {
+                merged[field] = prev?.[field]
+            } else {
+                merged[field] = undefined
+            }
+        }
+        return merged
+    })
+}
+
+function displayName(p: StoredAdminProvider): string {
+    return p.name?.trim() || PROVIDER_INFO[p.provider].label
+}
+
+export function validateAdminProviders(
+    list: StoredAdminProvider[],
+    envConfig: ServerModelsConfig | null = null,
+): string | null {
+    const envProviders = envConfig?.providers ?? []
+    for (const single of FIXED_CRED_PROVIDERS) {
+        if (list.filter((p) => p.provider === single).length > 1) {
+            return `Only one ${PROVIDER_INFO[single].label} provider is supported (its credentials use fixed environment variables).`
+        }
+        // Its credentials are global; a panel instance would silently
+        // override the credentials env-configured models rely on
+        if (
+            list.some((p) => p.provider === single) &&
+            envProviders.some((p) => p.provider === single)
+        ) {
+            return `${PROVIDER_INFO[single].label} is already configured in AI_MODELS_CONFIG / ai-models.json and shares global credentials. Manage it via the environment configuration instead.`
+        }
+    }
+    const names = list.map((p) => displayName(p))
+    if (new Set(names).size !== names.length) {
+        return "Provider display names must be unique."
+    }
+    const envNames = new Set(envProviders.map((p) => p.name))
+    const clash = names.find((n) => envNames.has(n))
+    if (clash) {
+        return `"${clash}" is already defined in AI_MODELS_CONFIG / ai-models.json. Use a different display name.`
+    }
+    if (list.filter((p) => p.isDefault).length > 1) {
+        return "Only one provider can be the default."
+    }
+    return null
+}
+
+// The panel's contribution to the server models config, derived at read
+// time and merged with the env baseline by loadRawServerModelsConfig().
+export function adminProvidersToConfig(
+    list: StoredAdminProvider[],
+): ServerModelsConfig {
+    const config: ServerModelsConfig = { providers: [] }
+    const indexByProvider = new Map<ProviderName, number>()
+    for (const p of list) {
+        const index = indexByProvider.get(p.provider) ?? 0
+        indexByProvider.set(p.provider, index + 1)
+        if (p.models.length === 0) continue
+        const env = credEnvNames(p.provider, index)
+        config.providers.push({
+            name: displayName(p),
+            provider: p.provider,
+            models: p.models,
+            ...(env.key && p.apiKey ? { apiKeyEnv: env.key } : {}),
+            ...(env.url && p.baseUrl ? { baseUrlEnv: env.url } : {}),
+            ...(p.isDefault ? { default: true } : {}),
+        })
+    }
+    return config
+}
+
+// Settings updates derived from the provider list: credential env vars,
+// the stored list itself, and AI_PROVIDER/AI_MODEL when a default is set.
+// Keys derived from `previous` but absent now are set to null (removed,
+// falling back to the environment).
+export function deriveEnvUpdates(
+    list: StoredAdminProvider[],
+    previous: StoredAdminProvider[],
+): Record<string, string | null> {
+    const updates: Record<string, string | null> = {}
+
+    // Clear everything the previous list owned, then overwrite below
+    for (const key of derivedEnvKeys(previous)) updates[key] = null
+
+    const indexByProvider = new Map<ProviderName, number>()
+    for (const p of list) {
+        const index = indexByProvider.get(p.provider) ?? 0
+        indexByProvider.set(p.provider, index + 1)
+
+        if (p.provider === "bedrock") {
+            if (p.awsAccessKeyId) updates.AWS_ACCESS_KEY_ID = p.awsAccessKeyId
+            if (p.awsSecretAccessKey)
+                updates.AWS_SECRET_ACCESS_KEY = p.awsSecretAccessKey
+            if (p.awsRegion) updates.AWS_REGION = p.awsRegion
+        } else if (p.provider === "vertexai") {
+            if (p.vertexApiKey) updates.GOOGLE_VERTEX_API_KEY = p.vertexApiKey
+            if (p.baseUrl) updates.GOOGLE_VERTEX_BASE_URL = p.baseUrl
+        } else if (p.provider === "ollama") {
+            if (p.apiKey) updates.OLLAMA_API_KEY = p.apiKey
+            if (p.baseUrl) updates.OLLAMA_BASE_URL = p.baseUrl
+        } else {
+            const env = credEnvNames(p.provider, index)
+            if (env.key && p.apiKey) updates[env.key] = p.apiKey
+            if (env.url && p.baseUrl) updates[env.url] = p.baseUrl
+        }
+    }
+
+    updates[ADMIN_PROVIDERS_KEY] = list.length > 0 ? JSON.stringify(list) : null
+
+    // The panel's default also becomes the server-wide default model;
+    // without one, the env-configured default applies.
+    const defaultEntry = list.find((p) => p.isDefault && p.models.length > 0)
+    if (defaultEntry) {
+        updates.AI_PROVIDER = defaultEntry.provider
+        updates.AI_MODEL = defaultEntry.models[0]
+    }
+
+    return updates
+}
+
+// Every settings key the panel may have written for a given list.
+// AI_MODELS_CONFIG is included to clean up values written by older
+// versions of the panel (it is no longer written).
+function derivedEnvKeys(list: StoredAdminProvider[]): string[] {
+    const keys = new Set<string>([
+        "AI_MODELS_CONFIG",
+        "AI_PROVIDER",
+        "AI_MODEL",
+    ])
+    const indexByProvider = new Map<ProviderName, number>()
+    for (const p of list) {
+        const index = indexByProvider.get(p.provider) ?? 0
+        indexByProvider.set(p.provider, index + 1)
+        if (p.provider === "bedrock") {
+            keys.add("AWS_ACCESS_KEY_ID")
+            keys.add("AWS_SECRET_ACCESS_KEY")
+            keys.add("AWS_REGION")
+        } else if (p.provider === "vertexai") {
+            keys.add("GOOGLE_VERTEX_API_KEY")
+            keys.add("GOOGLE_VERTEX_BASE_URL")
+        } else if (p.provider === "ollama") {
+            keys.add("OLLAMA_API_KEY")
+            keys.add("OLLAMA_BASE_URL")
+        } else {
+            const env = credEnvNames(p.provider, index)
+            if (env.key) keys.add(env.key)
+            if (env.url) keys.add(env.url)
+        }
+    }
+    return [...keys]
+}

lib/admin/settings-registry.ts

@@ -0,0 +1,229 @@
+// Declarative registry of the general env vars editable in the admin panel.
+// Drives both server-side validation (app/api/admin/settings) and UI
+// rendering (app/[lang]/admin). Keys are exactly the env var names.
+//
+// AI providers and models are managed separately in the panel's Models
+// section (lib/admin/providers.ts), not here.
+//
+// Not listed here (and therefore rejected by the API):
+// - NEXT_PUBLIC_* vars: baked into the client bundle at build time
+// - ADMIN_PASSWORD / SETTINGS_FILE: bootstrap values, env-only to avoid lockout
+// - Per-provider reasoning/thinking tuning vars: env-only (see env.example)
+
+export type SettingType = "string" | "secret" | "number" | "boolean" | "enum"
+
+export interface SettingDef {
+    key: string
+    group: string
+    type: SettingType
+    label: string
+    description?: string
+    options?: string[]
+    min?: number
+    max?: number
+    placeholder?: string
+    // Built-in default applied at runtime when the value is unset, so the UI
+    // can reflect actual behavior (e.g. ALLOW_PRIVATE_URLS defaults to "true").
+    default?: string
+    // Value is only picked up at process start (module-load readers)
+    restartRequired?: boolean
+}
+
+export interface SettingGroup {
+    id: string
+    title: string
+    description: string
+    // Optional sections gated by an on/off switch in the panel; fields are
+    // grayed out until enabled. Starts on when any field is already set.
+    toggleable?: boolean
+}
+
+export const SETTING_GROUPS: SettingGroup[] = [
+    {
+        id: "generation",
+        title: "Generation",
+        description: "Output parameters applied to all chat requests.",
+    },
+    {
+        id: "access",
+        title: "Access Control",
+        description: "Restrict who can use this deployment.",
+    },
+    {
+        id: "features",
+        title: "Features",
+        description: "Optional features and security toggles.",
+    },
+    {
+        id: "observability",
+        title: "Observability",
+        description: "Langfuse tracing for LLM calls.",
+        toggleable: true,
+    },
+    {
+        id: "quota",
+        title: "Quota & Rate Limits",
+        description:
+            "Per-IP usage limits. Enforcement requires a DynamoDB table.",
+        toggleable: true,
+    },
+]
+
+export const SETTINGS_REGISTRY: SettingDef[] = [
+    // ── Generation ───────────────────────────────────────────────────
+    {
+        key: "TEMPERATURE",
+        group: "generation",
+        type: "number",
+        label: "Temperature",
+        description:
+            "Leave unset for reasoning models that reject temperature.",
+        min: 0,
+        max: 2,
+    },
+    {
+        key: "MAX_OUTPUT_TOKENS",
+        group: "generation",
+        type: "number",
+        label: "Max Output Tokens",
+        min: 1,
+    },
+
+    // ── Access Control ───────────────────────────────────────────────
+    {
+        key: "ACCESS_CODE_LIST",
+        group: "access",
+        type: "string",
+        label: "Access Codes",
+        description:
+            "Comma-separated list. Users must enter one to chat. Empty = open access.",
+        placeholder: "code1,code2",
+    },
+
+    // ── Features ─────────────────────────────────────────────────────
+    {
+        key: "ENABLE_VLM_VALIDATION",
+        group: "features",
+        type: "boolean",
+        label: "VLM Diagram Validation",
+        description:
+            "Visually validate generated diagrams with a vision model.",
+    },
+    {
+        key: "VALIDATION_MODEL",
+        group: "features",
+        type: "string",
+        label: "Validation Model",
+        description: "Falls back to the default AI model when empty.",
+    },
+    {
+        key: "VALIDATION_TIMEOUT",
+        group: "features",
+        type: "number",
+        label: "Validation Timeout (ms)",
+        min: 1000,
+    },
+    {
+        key: "ENABLE_HISTORY_XML_REPLACE",
+        group: "features",
+        type: "boolean",
+        label: "History XML Compression",
+        description: "Replace old diagram XML in history with placeholders.",
+    },
+    {
+        key: "ALLOW_PRIVATE_URLS",
+        group: "features",
+        type: "boolean",
+        label: "Allow Private URLs",
+        description:
+            "Turn off to block requests to private IPs and internal hostnames (SSRF protection).",
+        // Unset means allowed at runtime (ssrf-protection: !== "false")
+        default: "true",
+    },
+
+    // ── Observability ────────────────────────────────────────────────
+    {
+        key: "LANGFUSE_PUBLIC_KEY",
+        group: "observability",
+        type: "string",
+        label: "Langfuse Public Key",
+        placeholder: "pk-lf-…",
+        restartRequired: true,
+    },
+    {
+        key: "LANGFUSE_SECRET_KEY",
+        group: "observability",
+        type: "secret",
+        label: "Langfuse Secret Key",
+        restartRequired: true,
+    },
+    {
+        key: "LANGFUSE_BASEURL",
+        group: "observability",
+        type: "string",
+        label: "Langfuse Base URL",
+        placeholder: "https://cloud.langfuse.com",
+        restartRequired: true,
+    },
+
+    // ── Quota ────────────────────────────────────────────────────────
+    {
+        key: "DAILY_REQUEST_LIMIT",
+        group: "quota",
+        type: "number",
+        label: "Daily Request Limit",
+        description: "Per IP per day.",
+        min: 1,
+    },
+    {
+        key: "DAILY_TOKEN_LIMIT",
+        group: "quota",
+        type: "number",
+        label: "Daily Token Limit",
+        description: "Per IP per day.",
+        min: 1,
+    },
+    {
+        key: "TPM_LIMIT",
+        group: "quota",
+        type: "number",
+        label: "Tokens Per Minute",
+        min: 1,
+    },
+    {
+        key: "DYNAMODB_QUOTA_TABLE",
+        group: "quota",
+        type: "string",
+        label: "DynamoDB Table",
+        description: "Quota enforcement is disabled when empty.",
+        restartRequired: true,
+    },
+    {
+        key: "DYNAMODB_REGION",
+        group: "quota",
+        type: "string",
+        label: "DynamoDB Region",
+        placeholder: "ap-northeast-1",
+        restartRequired: true,
+    },
+    {
+        key: "QUOTA_TIMEZONE",
+        group: "quota",
+        type: "string",
+        label: "Quota Timezone",
+        description: "Timezone for the daily reset boundary.",
+        placeholder: "UTC",
+        restartRequired: true,
+    },
+]
+
+export const SETTINGS_BY_KEY: Map<string, SettingDef> = new Map(
+    SETTINGS_REGISTRY.map((def) => [def.key, def]),
+)
+
+export const SETTINGS_BY_GROUP: Map<string, SettingDef[]> = new Map(
+    SETTING_GROUPS.map((g) => [
+        g.id,
+        SETTINGS_REGISTRY.filter((d) => d.group === g.id),
+    ]),
+)

lib/admin/settings.ts

@@ -0,0 +1,134 @@
+import fs from "fs"
+import path from "path"
+
+// File-based admin settings, overlaid onto process.env (dotenv-style).
+// Precedence: settings file > env var > built-in default.
+// Keys are exactly the env var names.
+
+interface SettingsFile {
+    version: 1
+    values: Record<string, string>
+}
+
+// Original env values snapshotted before the first overlay, so removing a
+// key from the settings file restores the env default. null = was unset.
+const originalEnv: Record<string, string | null> = {}
+// Keys currently overlaid, so we can restore ones removed from the file.
+let overlaidKeys = new Set<string>()
+
+let cachedSettings: Record<string, string> | null = null
+
+export function getSettingsPath(): string {
+    const custom = process.env.SETTINGS_FILE
+    if (custom && custom.trim().length > 0) return custom
+    return path.join(process.cwd(), "data", "settings.json")
+}
+
+export function loadSettings(): Record<string, string> {
+    if (cachedSettings) return cachedSettings
+    try {
+        const raw = fs.readFileSync(getSettingsPath(), "utf8")
+        const parsed = JSON.parse(raw) as SettingsFile
+        // Keep only string values — a hand-edited or corrupted file could
+        // hold null/arrays/numbers that would otherwise be overlaid onto
+        // process.env and coerce to junk like "[object Object]".
+        const values: Record<string, string> = {}
+        const rawValues =
+            parsed &&
+            typeof parsed.values === "object" &&
+            parsed.values &&
+            !Array.isArray(parsed.values)
+                ? parsed.values
+                : {}
+        for (const [key, value] of Object.entries(rawValues)) {
+            if (typeof value === "string") values[key] = value
+        }
+        cachedSettings = values
+    } catch (err: any) {
+        if (err?.code !== "ENOENT") {
+            console.error("[admin-settings] Failed to read settings file:", err)
+        }
+        cachedSettings = {}
+    }
+    return cachedSettings
+}
+
+export function applyToEnv(): void {
+    const values = loadSettings()
+
+    // Restore env for keys that were overlaid before but are now gone
+    for (const key of overlaidKeys) {
+        if (!(key in values)) {
+            const original = originalEnv[key]
+            if (original === null) delete process.env[key]
+            else process.env[key] = original
+        }
+    }
+
+    for (const [key, value] of Object.entries(values)) {
+        if (!(key in originalEnv)) {
+            originalEnv[key] = process.env[key] ?? null
+        }
+        process.env[key] = value
+    }
+
+    overlaidKeys = new Set(Object.keys(values))
+}
+
+// The effective env value if the file entry were removed (for fallback display)
+export function getEnvFallback(key: string): string | null {
+    if (overlaidKeys.has(key)) return originalEnv[key] ?? null
+    return process.env[key] ?? null
+}
+
+// Whether a key's current value comes from the file, the environment, or is unset
+export function getValueSource(key: string): "file" | "env" | "default" {
+    if (key in loadSettings()) return "file"
+    return getEnvFallback(key) !== null ? "env" : "default"
+}
+
+export function saveSettings(updates: Record<string, string | null>): void {
+    const current = { ...loadSettings() }
+    for (const [key, value] of Object.entries(updates)) {
+        if (value === null) delete current[key]
+        else current[key] = value
+    }
+
+    const filePath = getSettingsPath()
+    fs.mkdirSync(path.dirname(filePath), { recursive: true })
+    const tmpPath = `${filePath}.tmp`
+    const data: SettingsFile = { version: 1, values: current }
+    fs.writeFileSync(tmpPath, JSON.stringify(data, null, 2), { mode: 0o600 })
+    fs.renameSync(tmpPath, filePath)
+
+    cachedSettings = current
+    applyToEnv()
+}
+
+let writableCache: boolean | null = null
+
+export function isSettingsWritable(): boolean {
+    if (writableCache !== null) return writableCache
+    try {
+        const dir = path.dirname(getSettingsPath())
+        fs.mkdirSync(dir, { recursive: true })
+        fs.accessSync(dir, fs.constants.W_OK)
+        writableCache = true
+    } catch {
+        writableCache = false
+    }
+    return writableCache
+}
+
+// Test-only: reset module state
+export function _resetForTests(): void {
+    cachedSettings = null
+    writableCache = null
+    for (const key of overlaidKeys) {
+        const original = originalEnv[key]
+        if (original === null) delete process.env[key]
+        else if (original !== undefined) process.env[key] = original
+    }
+    overlaidKeys = new Set()
+    for (const key of Object.keys(originalEnv)) delete originalEnv[key]
+}

lib/ai-providers.ts

@@ -6,6 +6,7 @@ import { createGateway, gateway } from "@ai-sdk/gateway"
 import { createGoogleGenerativeAI, google } from "@ai-sdk/google"
 import { createVertex } from "@ai-sdk/google-vertex"
 import { createOpenAI, openai } from "@ai-sdk/openai"
+import { aihubmix, createAihubmix } from "@aihubmix/ai-sdk-provider"
 import { fromNodeProviderChain } from "@aws-sdk/credential-providers"
 import { createOpenRouter } from "@openrouter/ai-sdk-provider"
 import { createOllama, ollama } from "ollama-ai-provider-v2"
@@ -13,6 +14,8 @@ import { PROVIDER_INFO, type ProviderName } from "@/lib/types/model-config"
 
 export type { ProviderName }
 
+export const AIHUBMIX_APP_CODE = "MSBS9675"
+
 interface ModelConfig {
     model: any
     providerOptions?: any
@@ -29,6 +32,7 @@ export const SINGLE_SYSTEM_PROVIDERS = new Set<ProviderName>([
     "kimi",
     "qiniu",
     "novita",
+    "mimo",
 ])
 
 /**
@@ -57,6 +61,18 @@ export function normalizeMiniMaxBaseURL(rawUrl: string): {
     return { baseURL, isAnthropicCompatible }
 }
 
+export function isAihubmixStandardBaseURL(
+    rawUrl: string | null | undefined,
+): boolean {
+    if (!rawUrl) return true
+
+    const baseURL = rawUrl.replace(/\/+$/, "")
+    return (
+        baseURL === "https://aihubmix.com" ||
+        baseURL === "https://aihubmix.com/v1"
+    )
+}
+
 export interface ClientOverrides {
     provider?: string | null
     baseUrl?: string | null
@@ -86,6 +102,7 @@ const ALLOWED_CLIENT_PROVIDERS: ProviderName[] = [
     "azure",
     "bedrock",
     "openrouter",
+    "aihubmix",
     "deepseek",
     "siliconflow",
     "sglang",
@@ -100,6 +117,8 @@ const ALLOWED_CLIENT_PROVIDERS: ProviderName[] = [
     "kimi",
     "minimax",
     "novita",
+    "mimo",
+    "atlascloud",
 ]
 
 // Bedrock provider options for Anthropic beta features
@@ -513,6 +532,7 @@ function buildProviderOptions(
 
         case "deepseek":
         case "openrouter":
+        case "aihubmix":
         case "siliconflow":
         case "sglang":
         case "gateway":
@@ -523,7 +543,9 @@ function buildProviderOptions(
         case "qwen":
         case "kimi":
         case "qiniu":
-        case "novita": {
+        case "novita":
+        case "atlascloud":
+        case "mimo": {
             // These providers don't have reasoning configs in AI SDK yet
             // Gateway passes through to underlying providers which handle their own configs
             break
@@ -537,7 +559,7 @@ function buildProviderOptions(
 }
 
 // Map of provider to required environment variable
-const PROVIDER_ENV_VARS: Record<ProviderName, string | null> = {
+export const PROVIDER_ENV_VARS: Record<ProviderName, string | null> = {
     bedrock: null, // AWS SDK auto-uses IAM role on AWS, or env vars locally
     openai: "OPENAI_API_KEY",
     anthropic: "ANTHROPIC_API_KEY",
@@ -546,6 +568,7 @@ const PROVIDER_ENV_VARS: Record<ProviderName, string | null> = {
     azure: "AZURE_API_KEY",
     ollama: null, // No credentials needed for local Ollama
     openrouter: "OPENROUTER_API_KEY",
+    aihubmix: "AIHUBMIX_API_KEY",
     deepseek: "DEEPSEEK_API_KEY",
     siliconflow: "SILICONFLOW_API_KEY",
     sglang: "SGLANG_API_KEY",
@@ -559,6 +582,8 @@ const PROVIDER_ENV_VARS: Record<ProviderName, string | null> = {
     kimi: "KIMI_API_KEY",
     minimax: "MINIMAX_API_KEY",
     novita: "NOVITA_API_KEY",
+    mimo: "MIMO_API_KEY",
+    atlascloud: "ATLASCLOUD_API_KEY",
 }
 
 /**
@@ -573,7 +598,15 @@ function detectProvider(): ProviderName | null {
             // Skip ollama - it doesn't require credentials
             continue
         }
-        if (process.env[envVar]) {
+        // Anthropic accepts ANTHROPIC_AUTH_TOKEN (Bearer auth) as alternative to ANTHROPIC_API_KEY
+        const hasCredential =
+            provider === "anthropic"
+                ? !!(
+                      process.env.ANTHROPIC_API_KEY ||
+                      process.env.ANTHROPIC_AUTH_TOKEN
+                  )
+                : !!process.env[envVar]
+        if (hasCredential) {
             // Azure requires additional config (baseURL or resourceName)
             if (provider === "azure") {
                 const hasBaseUrl = !!process.env.AZURE_BASE_URL
@@ -615,13 +648,26 @@ function validateProviderCredentials(
         return
     }
 
-    // Use custom env var name if provided, otherwise use default
-    const requiredVar = customApiKeyEnv || PROVIDER_ENV_VARS[provider]
-    if (requiredVar && !process.env[requiredVar]) {
-        throw new Error(
-            `${requiredVar} environment variable is required for ${provider} provider. ` +
-                `Please set it in your .env.local file.`,
+    // Anthropic accepts ANTHROPIC_AUTH_TOKEN (Bearer auth) as alternative to ANTHROPIC_API_KEY
+    if (provider === "anthropic" && !customApiKeyEnv) {
+        const hasCredential = !!(
+            process.env.ANTHROPIC_API_KEY || process.env.ANTHROPIC_AUTH_TOKEN
         )
+        if (!hasCredential) {
+            throw new Error(
+                `Either ANTHROPIC_API_KEY or ANTHROPIC_AUTH_TOKEN environment variable is required for anthropic provider. ` +
+                    `Please set one in your .env.local file.`,
+            )
+        }
+    } else {
+        // Use custom env var name if provided, otherwise use default
+        const requiredVar = customApiKeyEnv || PROVIDER_ENV_VARS[provider]
+        if (requiredVar && !process.env[requiredVar]) {
+            throw new Error(
+                `${requiredVar} environment variable is required for ${provider} provider. ` +
+                    `Please set it in your .env.local file.`,
+            )
+        }
     }
 
     // Azure requires either AZURE_BASE_URL or AZURE_RESOURCE_NAME in addition to API key
@@ -641,7 +687,7 @@ function validateProviderCredentials(
  * Get the AI model based on environment variables
  *
  * Environment variables:
- * - AI_PROVIDER: The provider to use (bedrock, openai, anthropic, google, azure, ollama, openrouter, deepseek, siliconflow, sglang, gateway, modelscope)
+ * - AI_PROVIDER: The provider to use (bedrock, openai, anthropic, google, azure, ollama, openrouter, aihubmix, deepseek, siliconflow, sglang, gateway, modelscope)
  * - AI_MODEL: The model ID/name for the selected provider
  *
  * Provider-specific env vars:
@@ -653,6 +699,7 @@ function validateProviderCredentials(
  * - AWS_REGION, AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY: AWS Bedrock credentials
  * - OLLAMA_BASE_URL: Ollama server URL (optional, defaults to https://ollama.com/api)
  * - OPENROUTER_API_KEY: OpenRouter API key
+ * - AIHUBMIX_API_KEY: AIHubMix API key
  * - DEEPSEEK_API_KEY: DeepSeek API key
  * - DEEPSEEK_BASE_URL: DeepSeek endpoint (optional)
  * - SILICONFLOW_API_KEY: SiliconFlow API key
@@ -689,8 +736,10 @@ export function getAIModel(overrides?: ClientOverrides): ModelConfig {
             (overrides?.provider === "vertexai" && overrides?.vertexApiKey))
     )
 
-    // Use client override if provided, otherwise fall back to env vars
-    const modelId = overrides?.modelId || process.env.AI_MODEL
+    // Use client override if provided, otherwise fall back to env vars.
+    // AI_MODEL may be comma-separated (multi-model fallback); pick the first.
+    const envModel = process.env.AI_MODEL?.split(",")[0]?.trim() || undefined
+    const modelId = overrides?.modelId || envModel
 
     if (!modelId) {
         if (isClientOverride) {
@@ -740,6 +789,7 @@ export function getAIModel(overrides?: ClientOverrides): ModelConfig {
                         `- GOOGLE_GENERATIVE_AI_API_KEY for Google\n` +
                         `- AWS_ACCESS_KEY_ID for Bedrock\n` +
                         `- OPENROUTER_API_KEY for OpenRouter\n` +
+                        `- AIHUBMIX_API_KEY for AIHubMix\n` +
                         `- AZURE_API_KEY for Azure\n` +
                         `- SILICONFLOW_API_KEY for SiliconFlow\n` +
                         `- SGLANG_API_KEY for SGLang\n` +
@@ -845,8 +895,16 @@ export function getAIModel(overrides?: ClientOverrides): ModelConfig {
                 serverBaseUrl,
                 "https://api.anthropic.com/v1",
             )
+            // Anthropic supports two auth methods (mutually exclusive):
+            // - apiKey: sends as `x-api-key` header
+            // - authToken: sends as `Authorization: Bearer <token>` header
+            // Prefer apiKey if present (including client overrides); fall back
+            // to ANTHROPIC_AUTH_TOKEN env var only when no apiKey is available.
+            const authToken = !apiKey
+                ? process.env.ANTHROPIC_AUTH_TOKEN
+                : undefined
             const customProvider = createAnthropic({
-                apiKey,
+                ...(authToken ? { authToken } : { apiKey }),
                 baseURL,
                 headers: ANTHROPIC_BETA_HEADERS,
             })
@@ -974,6 +1032,42 @@ export function getAIModel(overrides?: ClientOverrides): ModelConfig {
             break
         }
 
+        case "aihubmix": {
+            const apiKey = resolveApiKey(overrides, "AIHUBMIX_API_KEY")
+            const serverBaseUrl = resolveBaseUrlEnv(
+                overrides,
+                "AIHUBMIX_BASE_URL",
+            )
+            const baseURL = resolveBaseURL(
+                overrides?.apiKey,
+                overrides?.baseUrl,
+                serverBaseUrl,
+                PROVIDER_INFO.aihubmix.defaultBaseUrl,
+            )
+            const defaultBaseURL = PROVIDER_INFO.aihubmix.defaultBaseUrl
+
+            if (
+                isAihubmixStandardBaseURL(baseURL) ||
+                baseURL === defaultBaseURL
+            ) {
+                const aihubmixProvider =
+                    overrides?.apiKey || apiKey
+                        ? createAihubmix({
+                              apiKey,
+                              appCode: AIHUBMIX_APP_CODE,
+                          })
+                        : aihubmix
+                model = aihubmixProvider(modelId)
+            } else {
+                const aihubmixCompatibleProvider = createOpenAI({
+                    apiKey,
+                    baseURL,
+                })
+                model = aihubmixCompatibleProvider.chat(modelId)
+            }
+            break
+        }
+
         case "deepseek": {
             const apiKey = resolveApiKey(overrides, "DEEPSEEK_API_KEY")
             const serverBaseUrl = resolveBaseUrlEnv(
@@ -1259,11 +1353,28 @@ export function getAIModel(overrides?: ClientOverrides): ModelConfig {
             break
         }
 
+        case "mimo": {
+            const apiKey = resolveApiKey(overrides, "MIMO_API_KEY")
+            const baseURL = resolveBaseURL(
+                overrides?.apiKey,
+                overrides?.baseUrl,
+                resolveBaseUrlEnv(overrides, "MIMO_BASE_URL"),
+                PROVIDER_INFO.mimo?.defaultBaseUrl,
+            )
+            // Use createDeepSeek to properly handle reasoning_content for MiMo
+            // thinking models (e.g., mimo-v2.5-pro). MiMo's API requires
+            // reasoning_content to be passed back during multi-turn tool calls
+            // (returns 400 otherwise), same convention as DeepSeek and Kimi.
+            const mimoProvider = createDeepSeek({ apiKey, baseURL })
+            model = mimoProvider(modelId)
+            break
+        }
+
         case "glm":
         case "qwen":
         case "qiniu":
-        case "kimi":
-        case "novita": {
+        case "novita":
+        case "atlascloud": {
             const envVar = PROVIDER_ENV_VARS[provider]
             if (!envVar) {
                 throw new Error(
@@ -1288,9 +1399,26 @@ export function getAIModel(overrides?: ClientOverrides): ModelConfig {
             break
         }
 
+        case "kimi": {
+            const apiKey = resolveApiKey(overrides, "KIMI_API_KEY")
+            const baseURL = resolveBaseURL(
+                overrides?.apiKey,
+                overrides?.baseUrl,
+                resolveBaseUrlEnv(overrides, "KIMI_BASE_URL"),
+                PROVIDER_INFO.kimi?.defaultBaseUrl,
+            )
+            // Use createDeepSeek to properly handle reasoning_content for Kimi
+            // thinking models (e.g., kimi-k2.6). Kimi's API uses the same
+            // reasoning_content field as DeepSeek, so this provider correctly
+            // captures and replays reasoning in multi-turn conversations.
+            const customProvider = createDeepSeek({ apiKey, baseURL })
+            model = customProvider(modelId)
+            break
+        }
+
         default:
             throw new Error(
-                `Unknown AI provider: ${provider}. Supported providers: bedrock, openai, anthropic, google, azure, ollama, openrouter, deepseek, siliconflow, sglang, gateway, edgeone, doubao, modelscope, glm, qwen, qiniu, kimi, minimax, novita`,
+                `Unknown AI provider: ${provider}. Supported providers: bedrock, openai, anthropic, google, azure, ollama, openrouter, aihubmix, deepseek, siliconflow, sglang, gateway, edgeone, doubao, modelscope, glm, qwen, qiniu, kimi, minimax, novita, mimo, atlascloud`,
             )
     }
 
@@ -1316,76 +1444,19 @@ export function supportsPromptCaching(modelId: string): boolean {
     )
 }
 
-/**
- * Check if a model supports image/vision input.
- * Some models silently drop image parts without error (AI SDK warning only).
- */
-export function supportsImageInput(modelId: string): boolean {
-    const lowerModelId = modelId.toLowerCase()
-
-    // Helper to check if model has vision capability indicator
-    const hasVisionIndicator =
-        lowerModelId.includes("vision") || lowerModelId.includes("vl")
-
-    // Models that DON'T support image/vision input (unless vision variant)
-    // Kimi K2 doesn't support images, but K2.5 does
-    // Only block kimi-k2 specifically, not other Kimi models
-    if (
-        (lowerModelId.includes("kimi-k2") ||
-            lowerModelId.includes("kimi_k2")) &&
-        !hasVisionIndicator &&
-        !lowerModelId.includes("2.5") &&
-        !lowerModelId.includes("k2.5")
-    ) {
-        return false
-    }
-
-    // Moonshot text models (moonshot-v1 series are text-only)
-    if (lowerModelId.includes("moonshot-v1") && !hasVisionIndicator) {
-        return false
-    }
-
-    // MiniMax text models (MiniMax-M2.x series are text-only)
-    if (lowerModelId.includes("minimax") && !hasVisionIndicator) {
-        return false
-    }
-
-    // DeepSeek text models (not vision variants)
-    if (lowerModelId.includes("deepseek") && !hasVisionIndicator) {
-        return false
-    }
-
-    // Qwen text models (not vision variants like qwen-vl)
-    // Qwen3.5 series (qwen3.5, qwen3.5-plus, qwen3.5-flash) natively support image input
-    // QvQ (Qwen Visual QA) models are vision models — exclude them even when prefixed with "qwen/"
-    if (
-        lowerModelId.includes("qwen") &&
-        !hasVisionIndicator &&
-        !lowerModelId.includes("qwen3.5") &&
-        !lowerModelId.includes("qvq")
-    ) {
-        return false
-    }
-
-    // GLM text models (not vision variants)
-    // GLM vision models: glm-4v, glm-4v-9b, glm-4.1v-9b-thinking
-    if (lowerModelId.includes("glm") && !hasVisionIndicator) {
-        if (!/[\d.]v/.test(lowerModelId)) {
-            return false
-        }
-    }
-
-    // Default: assume model supports images
-    return true
-}
-
 /**
  * Get the AI model for diagram validation.
  * Uses VALIDATION_MODEL env var if set, otherwise falls back to AI_MODEL.
- * Throws if the model doesn't support image input.
+ *
+ * Note: we no longer guess whether the model supports image input from its
+ * name — that heuristic misfired on newer models (see issue #874). If a
+ * configured validation model can't handle images, the API call simply errors
+ * and the validate-diagram route falls back to "valid".
  */
 export function getValidationModel(): ReturnType<typeof getAIModel>["model"] {
-    const modelId = process.env.VALIDATION_MODEL || process.env.AI_MODEL
+    // AI_MODEL may be comma-separated (multi-model fallback); pick the first.
+    const envFallback = process.env.AI_MODEL?.split(",")[0]?.trim() || undefined
+    const modelId = process.env.VALIDATION_MODEL || envFallback
 
     if (!modelId) {
         throw new Error(
@@ -1393,12 +1464,6 @@ export function getValidationModel(): ReturnType<typeof getAIModel>["model"] {
         )
     }
 
-    if (!supportsImageInput(modelId)) {
-        throw new Error(
-            `Validation requires a vision-capable model. Model "${modelId}" does not support image input.`,
-        )
-    }
-
     const { model } = getAIModel({ modelId })
     return model
 }

lib/aihubmix-models.ts

@@ -0,0 +1,79 @@
+export const AIHUBMIX_MODELS_ENDPOINT = "https://aihubmix.com/api/v1/models"
+
+const NON_CHAT_MODEL_TYPES = new Set([
+    "embedding",
+    "image_generation",
+    "rerank",
+    "transcription",
+    "tts",
+    "video",
+])
+
+type AihubmixModelListPayload = {
+    data?: unknown
+}
+
+type AihubmixModelRecord = {
+    model_id?: unknown
+    types?: unknown
+}
+
+function getModelTypes(types: unknown): Set<string> {
+    if (typeof types !== "string") {
+        return new Set()
+    }
+
+    return new Set(
+        types
+            .split(",")
+            .map((type) => type.trim())
+            .filter(Boolean),
+    )
+}
+
+function isChatModel(record: AihubmixModelRecord): record is {
+    model_id: string
+    types: string
+} {
+    if (typeof record.model_id !== "string" || !record.model_id.trim()) {
+        return false
+    }
+
+    const types = getModelTypes(record.types)
+    if (!types.has("llm")) {
+        return false
+    }
+
+    return !Array.from(NON_CHAT_MODEL_TYPES).some((type) => types.has(type))
+}
+
+export function extractAihubmixModelIds(payload: unknown): string[] {
+    const data = (payload as AihubmixModelListPayload)?.data
+    if (!Array.isArray(data)) {
+        return []
+    }
+
+    const seen = new Set<string>()
+    const modelIds: string[] = []
+
+    for (const item of data) {
+        if (!item || typeof item !== "object") {
+            continue
+        }
+
+        const record = item as AihubmixModelRecord
+        if (!isChatModel(record)) {
+            continue
+        }
+
+        const modelId = record.model_id.trim()
+        if (seen.has(modelId)) {
+            continue
+        }
+
+        seen.add(modelId)
+        modelIds.push(modelId)
+    }
+
+    return modelIds
+}

lib/drawio-themes.ts

@@ -0,0 +1,17 @@
+export const DRAWIO_THEMES = [
+    "kennedy",
+    "atlas",
+    "dark",
+    "min",
+    "sketch",
+    "simple",
+] as const
+
+export type DrawioTheme = (typeof DRAWIO_THEMES)[number]
+
+export function isDrawioTheme(value: unknown): value is DrawioTheme {
+    return (
+        typeof value === "string" &&
+        (DRAWIO_THEMES as readonly string[]).includes(value)
+    )
+}

lib/i18n/dictionaries/en.json

@@ -34,7 +34,8 @@
         "glm": "GLM",
         "qwen": "Qwen",
         "kimi": "Kimi",
-        "qiniu": "Qiniu"
+        "qiniu": "Qiniu",
+        "mimo": "MiMo (Xiaomi)"
     },
     "chat": {
         "placeholder": "Describe your diagram or upload a file...",
@@ -102,10 +103,12 @@
         "theme": "Theme",
         "themeDescription": "Dark/Light mode for interface and DrawIO canvas.",
         "drawioStyle": "DrawIO Style",
-        "drawioStyleDescription": "Canvas style:",
-        "switchTo": "Switch to",
-        "minimal": "Minimal",
-        "sketch": "Sketch",
+        "drawioStyleDescription": "Canvas style",
+        "themeDefault": "Default",
+        "themeDark": "Dark",
+        "themeMinimal": "Minimal",
+        "themeSketch": "Sketch",
+        "themeSimple": "Simple",
         "diagramStyle": "Diagram Style",
         "diagramStyleDescription": "Toggle between minimal and styled diagram output.",
         "sendShortcut": "Send Shortcut",
@@ -129,6 +132,8 @@
         "customSystemMessage": "Custom System Message",
         "customSystemMessageDescription": "Add custom instructions appended to the AI's system prompt.",
         "customSystemMessagePlaceholder": "e.g., Always use blue color scheme for diagrams...",
+        "maxOutputTokens": "Max Output Tokens",
+        "maxOutputTokensDescription": "Budget for one reply, shared by thinking and the diagram XML. Raise it if the AI keeps thinking and no diagram appears. Leave empty for the default.",
         "panelVisibility": "Lobby Panels",
         "panelVisibilityDescription": "Choose which panels to show on the chat lobby.",
         "showRecentChats": "Recent Chats",
@@ -369,6 +374,7 @@
         "baseUrlWithExample": "Base URL (optional, e.g. {example})",
         "customEndpoint": "Custom endpoint URL",
         "minimaxBaseUrlHint": "Use /anthropic for Anthropic-compatible API (recommended), or /v1 for OpenAI-compatible API",
+        "mimoBaseUrlHint": "Default works with pay-as-you-go keys (sk-...). Token Plan subscribers (tp-... keys) must set https://token-plan-cn.xiaomimimo.com/v1",
         "models": "Models",
         "customModelId": "Custom model ID...",
         "allAdded": "All added",
@@ -400,6 +406,152 @@
         "showUnvalidatedModels": "Show unvalidated models",
         "allModelsShown": "All models are shown (including unvalidated)",
         "unvalidatedModelWarning": "This model has not been validated",
-        "serverDefaultModel": "Server default model"
+        "serverDefaultModel": "Server default model",
+        "showValue": "Show value",
+        "hideValue": "Hide value"
+    },
+    "admin": {
+        "title": "Admin Settings",
+        "loginPrompt": "Enter the admin password (the ADMIN_PASSWORD environment variable) to manage server settings.",
+        "password": "Password",
+        "signIn": "Sign In",
+        "signingIn": "Signing In…",
+        "loginFailed": "Login failed",
+        "precedence": "File overrides env · env overrides defaults",
+        "notWritable": "The settings file is not writable on this deployment (serverless platforms have no persistent disk). Settings are shown read-only — configure via environment variables instead.",
+        "settingGroups": "Setting groups",
+        "enabled": "Enabled",
+        "disabled": "Disabled",
+        "enableGroup": "Enable {group}",
+        "unsavedChanges": "Unsaved changes",
+        "saved": "Settings saved. Changes apply immediately.",
+        "saveFailed": "Save failed. Check your connection and try again.",
+        "invalidSettings": "Some settings are invalid.",
+        "discard": "Discard",
+        "saveChanges": "Save Changes",
+        "saving": "Saving…",
+        "sourceSaved": "Saved",
+        "sourceEnv": "Env",
+        "sourceSavedTitle": "Set in the admin settings file",
+        "sourceEnvTitle": "Set by an environment variable",
+        "restartRequired": "Restart Required",
+        "modified": "Modified",
+        "notSet": "Not set",
+        "savedReplace": "Saved ({hint}) — type to replace",
+        "showValue": "Show value",
+        "hideValue": "Hide value",
+        "removeValue": "Remove value",
+        "removeValueTitle": "Remove the stored value",
+        "resetToDefault": "Reset to default",
+        "models": "Models",
+        "modelsDescription": "Server-side providers and models available to all users — no personal API key needed. The default provider's first model is used when users don't pick one.",
+        "addProviderHint": "Add a provider to offer server-side models to all users.",
+        "selectProviderHint": "Select or add a provider to configure its credentials and models.",
+        "addProviderToOfferModels": "Add at least one model to expose this provider to users.",
+        "managedViaEnv": "(managed via env)",
+        "envReadOnly": "Defined in AI_MODELS_CONFIG / ai-models.json — read-only here. Edit the environment configuration to change it.",
+        "defaultModel": "Default Model",
+        "noModelsConfigured": "No models configured",
+        "modelCount": "{count} model",
+        "modelCountPlural": "{count} models",
+        "default": "Default",
+        "setAsDefault": "Set as default provider",
+        "defaultProvider": "Default provider",
+        "modelIdPlaceholder": "Model ID…",
+        "addModel": "Add model",
+        "suggested": "Suggested",
+        "test": "Test",
+        "testOk": "OK ({ms}ms)",
+        "testFailed": "Failed",
+        "removeModel": "Remove {model}",
+        "deleteProviderTitle": "Delete {name}?",
+        "deleteProviderDesc": "Its credentials and models will be removed from the server after you save.",
+        "cancel": "Cancel",
+        "delete": "Delete",
+        "groups": {
+            "generation": {
+                "title": "Generation",
+                "description": "Output parameters applied to all chat requests."
+            },
+            "access": {
+                "title": "Access Control",
+                "description": "Restrict who can use this deployment."
+            },
+            "features": {
+                "title": "Features",
+                "description": "Optional features and security toggles."
+            },
+            "observability": {
+                "title": "Observability",
+                "description": "Langfuse tracing for LLM calls."
+            },
+            "quota": {
+                "title": "Quota & Rate Limits",
+                "description": "Per-IP usage limits. Enforcement requires a DynamoDB table."
+            }
+        },
+        "settings": {
+            "TEMPERATURE": {
+                "label": "Temperature",
+                "description": "Leave unset for reasoning models that reject temperature."
+            },
+            "MAX_OUTPUT_TOKENS": {
+                "label": "Max Output Tokens"
+            },
+            "ACCESS_CODE_LIST": {
+                "label": "Access Codes",
+                "description": "Comma-separated list. Users must enter one to chat. Empty = open access."
+            },
+            "ENABLE_VLM_VALIDATION": {
+                "label": "VLM Diagram Validation",
+                "description": "Visually validate generated diagrams with a vision model."
+            },
+            "VALIDATION_MODEL": {
+                "label": "Validation Model",
+                "description": "Falls back to the default AI model when empty."
+            },
+            "VALIDATION_TIMEOUT": {
+                "label": "Validation Timeout (ms)"
+            },
+            "ENABLE_HISTORY_XML_REPLACE": {
+                "label": "History XML Compression",
+                "description": "Replace old diagram XML in history with placeholders."
+            },
+            "ALLOW_PRIVATE_URLS": {
+                "label": "Allow Private URLs",
+                "description": "Turn off to block requests to private IPs and internal hostnames (SSRF protection)."
+            },
+            "LANGFUSE_PUBLIC_KEY": {
+                "label": "Langfuse Public Key"
+            },
+            "LANGFUSE_SECRET_KEY": {
+                "label": "Langfuse Secret Key"
+            },
+            "LANGFUSE_BASEURL": {
+                "label": "Langfuse Base URL"
+            },
+            "DAILY_REQUEST_LIMIT": {
+                "label": "Daily Request Limit",
+                "description": "Per IP per day."
+            },
+            "DAILY_TOKEN_LIMIT": {
+                "label": "Daily Token Limit",
+                "description": "Per IP per day."
+            },
+            "TPM_LIMIT": {
+                "label": "Tokens Per Minute"
+            },
+            "DYNAMODB_QUOTA_TABLE": {
+                "label": "DynamoDB Table",
+                "description": "Quota enforcement is disabled when empty."
+            },
+            "DYNAMODB_REGION": {
+                "label": "DynamoDB Region"
+            },
+            "QUOTA_TIMEZONE": {
+                "label": "Quota Timezone",
+                "description": "Timezone for the daily reset boundary."
+            }
+        }
     }
 }

lib/i18n/dictionaries/ja.json

@@ -34,7 +34,8 @@
         "glm": "GLM",
         "qwen": "Qwen",
         "kimi": "Kimi",
-        "qiniu": "Qiniu"
+        "qiniu": "Qiniu",
+        "mimo": "MiMo (Xiaomi)"
     },
     "chat": {
         "placeholder": "ダイアグラムを説明するか、ファイルをアップロード...",
@@ -102,10 +103,12 @@
         "theme": "テーマ",
         "themeDescription": "インターフェースと DrawIO キャンバスのダーク/ライトモード。",
         "drawioStyle": "DrawIO スタイル",
-        "drawioStyleDescription": "キャンバススタイル：",
-        "switchTo": "切り替え",
-        "minimal": "ミニマル",
-        "sketch": "スケッチ",
+        "drawioStyleDescription": "キャンバススタイル",
+        "themeDefault": "デフォルト",
+        "themeDark": "ダーク",
+        "themeMinimal": "ミニマル",
+        "themeSketch": "スケッチ",
+        "themeSimple": "シンプル",
         "diagramStyle": "ダイアグラムスタイル",
         "diagramStyleDescription": "ミニマルとスタイル付きの出力を切り替えます。",
         "sendShortcut": "送信ショートカット",
@@ -129,6 +132,8 @@
         "customSystemMessage": "カスタムシステムメッセージ",
         "customSystemMessageDescription": "AIのシステムプロンプトに追加されるカスタム指示を入力します。",
         "customSystemMessagePlaceholder": "例：ダイアグラムには常に青色のカラースキームを使用...",
+        "maxOutputTokens": "最大出力トークン数",
+        "maxOutputTokensDescription": "1回の応答の予算で、思考過程とダイアグラムの XML が共有します。AI が考え続けてダイアグラムが生成されない場合は大きくしてください。空欄ならデフォルト値を使います。",
         "panelVisibility": "ロビーパネル",
         "panelVisibilityDescription": "チャットロビーに表示するパネルを選択します。",
         "showRecentChats": "最近のチャット",
@@ -323,6 +328,7 @@
         "baseUrlWithExample": "ベース URL（オプション、例: {example}）",
         "customEndpoint": "カスタムエンドポイント URL",
         "minimaxBaseUrlHint": "/anthropic で Anthropic 互換 API（推奨）、または /v1 で OpenAI 互換 API を使用",
+        "mimoBaseUrlHint": "デフォルトは従量課金キー（sk-...）用です。Token Plan 加入者（tp-... キー）は https://token-plan-cn.xiaomimimo.com/v1 を設定してください",
         "models": "モデル",
         "customModelId": "カスタムモデル ID...",
         "allAdded": "すべて追加済み",
@@ -354,7 +360,9 @@
         "showUnvalidatedModels": "未検証のモデルを表示",
         "allModelsShown": "すべてのモデルを表示（未検証を含む）",
         "unvalidatedModelWarning": "このモデルは検証されていません",
-        "serverDefaultModel": "サーバーデフォルトモデル"
+        "serverDefaultModel": "サーバーデフォルトモデル",
+        "showValue": "値を表示",
+        "hideValue": "値を非表示"
     },
     "templates": {
         "title": "マイテンプレート",
@@ -401,5 +409,149 @@
         "importNoFile": "JSON ファイルを選択してください",
         "importFailed": "インポートに失敗しました：{error}",
         "importSuccess": "{imported} 件インポート、{skipped} 件の重複をスキップしました"
+    },
+    "admin": {
+        "title": "管理者設定",
+        "loginPrompt": "サーバー設定を管理するには、管理者パスワード（ADMIN_PASSWORD 環境変数）を入力してください。",
+        "password": "パスワード",
+        "signIn": "ログイン",
+        "signingIn": "ログイン中…",
+        "loginFailed": "ログインに失敗しました",
+        "precedence": "ファイルが環境変数を上書き · 環境変数がデフォルトを上書き",
+        "notWritable": "このデプロイ環境では設定ファイルに書き込めません（サーバーレス環境には永続ディスクがありません）。設定は読み取り専用で表示されます——代わりに環境変数で構成してください。",
+        "settingGroups": "設定グループ",
+        "enabled": "有効",
+        "disabled": "無効",
+        "enableGroup": "{group} を有効化",
+        "unsavedChanges": "未保存の変更があります",
+        "saved": "設定を保存しました。変更は即座に反映されます。",
+        "saveFailed": "保存に失敗しました。接続を確認して再試行してください。",
+        "invalidSettings": "一部の設定が無効です。",
+        "discard": "破棄",
+        "saveChanges": "変更を保存",
+        "saving": "保存中…",
+        "sourceSaved": "保存済み",
+        "sourceEnv": "環境変数",
+        "sourceSavedTitle": "管理者設定ファイルで設定",
+        "sourceEnvTitle": "環境変数で設定",
+        "restartRequired": "再起動が必要",
+        "modified": "変更済み",
+        "notSet": "未設定",
+        "savedReplace": "保存済み（{hint}）——入力して置き換え",
+        "showValue": "値を表示",
+        "hideValue": "値を非表示",
+        "removeValue": "値を削除",
+        "removeValueTitle": "保存された値を削除",
+        "resetToDefault": "デフォルトに戻す",
+        "models": "モデル",
+        "modelsDescription": "全ユーザーが利用できるサーバー側のプロバイダーとモデル——個人の API キーは不要です。ユーザーがモデルを選択しない場合、デフォルトプロバイダーの最初のモデルが使用されます。",
+        "addProviderHint": "プロバイダーを追加して、全ユーザーにサーバー側モデルを提供します。",
+        "selectProviderHint": "プロバイダーを選択または追加して、その資格情報とモデルを構成します。",
+        "addProviderToOfferModels": "ユーザーにこのプロバイダーを公開するには、モデルを少なくとも 1 つ追加してください。",
+        "managedViaEnv": "（環境変数で管理）",
+        "envReadOnly": "AI_MODELS_CONFIG / ai-models.json で定義——ここでは読み取り専用です。変更するには環境構成を編集してください。",
+        "defaultModel": "デフォルトモデル",
+        "noModelsConfigured": "モデルが構成されていません",
+        "modelCount": "{count} 個のモデル",
+        "modelCountPlural": "{count} 個のモデル",
+        "default": "デフォルト",
+        "setAsDefault": "デフォルトプロバイダーに設定",
+        "defaultProvider": "デフォルトプロバイダー",
+        "modelIdPlaceholder": "モデル ID…",
+        "addModel": "モデルを追加",
+        "suggested": "おすすめ",
+        "test": "テスト",
+        "testOk": "正常（{ms}ms）",
+        "testFailed": "失敗",
+        "removeModel": "{model} を削除",
+        "deleteProviderTitle": "{name} を削除しますか？",
+        "deleteProviderDesc": "保存後、その資格情報とモデルはサーバーから削除されます。",
+        "cancel": "キャンセル",
+        "delete": "削除",
+        "groups": {
+            "generation": {
+                "title": "生成",
+                "description": "すべてのチャットリクエストに適用される出力パラメーター。"
+            },
+            "access": {
+                "title": "アクセス制御",
+                "description": "このデプロイを使用できるユーザーを制限します。"
+            },
+            "features": {
+                "title": "機能",
+                "description": "オプション機能とセキュリティの切り替え。"
+            },
+            "observability": {
+                "title": "オブザーバビリティ",
+                "description": "LLM 呼び出しの Langfuse トレース。"
+            },
+            "quota": {
+                "title": "クォータとレート制限",
+                "description": "IP ごとの使用制限。強制には DynamoDB テーブルが必要です。"
+            }
+        },
+        "settings": {
+            "TEMPERATURE": {
+                "label": "温度",
+                "description": "温度を受け付けない推論モデルの場合は未設定のままにしてください。"
+            },
+            "MAX_OUTPUT_TOKENS": {
+                "label": "最大出力トークン数"
+            },
+            "ACCESS_CODE_LIST": {
+                "label": "アクセスコード",
+                "description": "カンマ区切りのリスト。チャットにはいずれかの入力が必要です。空 = オープンアクセス。"
+            },
+            "ENABLE_VLM_VALIDATION": {
+                "label": "VLM 図検証",
+                "description": "ビジョンモデルで生成された図を視覚的に検証します。"
+            },
+            "VALIDATION_MODEL": {
+                "label": "検証モデル",
+                "description": "空の場合はデフォルトの AI モデルにフォールバックします。"
+            },
+            "VALIDATION_TIMEOUT": {
+                "label": "検証タイムアウト（ms）"
+            },
+            "ENABLE_HISTORY_XML_REPLACE": {
+                "label": "履歴 XML 圧縮",
+                "description": "履歴内の古い図 XML をプレースホルダーで置き換えます。"
+            },
+            "ALLOW_PRIVATE_URLS": {
+                "label": "プライベート URL を許可",
+                "description": "オフにすると、プライベート IP や内部ホスト名へのリクエストをブロックします（SSRF 保護）。"
+            },
+            "LANGFUSE_PUBLIC_KEY": {
+                "label": "Langfuse Public Key"
+            },
+            "LANGFUSE_SECRET_KEY": {
+                "label": "Langfuse Secret Key"
+            },
+            "LANGFUSE_BASEURL": {
+                "label": "Langfuse Base URL"
+            },
+            "DAILY_REQUEST_LIMIT": {
+                "label": "1 日あたりのリクエスト上限",
+                "description": "IP ごと 1 日あたり。"
+            },
+            "DAILY_TOKEN_LIMIT": {
+                "label": "1 日あたりのトークン上限",
+                "description": "IP ごと 1 日あたり。"
+            },
+            "TPM_LIMIT": {
+                "label": "1 分あたりのトークン数"
+            },
+            "DYNAMODB_QUOTA_TABLE": {
+                "label": "DynamoDB テーブル",
+                "description": "空の場合、クォータの強制は無効になります。"
+            },
+            "DYNAMODB_REGION": {
+                "label": "DynamoDB リージョン"
+            },
+            "QUOTA_TIMEZONE": {
+                "label": "クォータタイムゾーン",
+                "description": "1 日のリセット境界に使用するタイムゾーン。"
+            }
+        }
     }
 }

lib/i18n/dictionaries/zh-Hant.json

@@ -34,7 +34,8 @@
         "glm": "GLM",
         "qwen": "Qwen",
         "kimi": "Kimi",
-        "qiniu": "Qiniu"
+        "qiniu": "Qiniu",
+        "mimo": "MiMo (小米)"
     },
     "chat": {
         "placeholder": "描述您的圖表或上傳檔案...",
@@ -102,10 +103,12 @@
         "theme": "主題",
         "themeDescription": "介面和 DrawIO 畫布的深色/淺色模式。",
         "drawioStyle": "DrawIO 樣式",
-        "drawioStyleDescription": "畫布樣式：",
-        "switchTo": "切換到",
-        "minimal": "簡約",
-        "sketch": "草圖",
+        "drawioStyleDescription": "畫布樣式",
+        "themeDefault": "預設",
+        "themeDark": "深色",
+        "themeMinimal": "簡約",
+        "themeSketch": "草圖",
+        "themeSimple": "簡單",
         "diagramStyle": "圖表樣式",
         "diagramStyleDescription": "切換簡約與精緻圖表輸出模式。",
         "sendShortcut": "傳送快捷鍵",
@@ -129,6 +132,8 @@
         "customSystemMessage": "自訂系統訊息",
         "customSystemMessageDescription": "新增自訂指示，將附加到 AI 的系統提示末尾。",
         "customSystemMessagePlaceholder": "例如：圖表始終使用藍色配色方案...",
+        "maxOutputTokens": "最大輸出 token 數",
+        "maxOutputTokensDescription": "單次回覆的額度，思考過程與圖表 XML 共用。若 AI 一直在思考卻沒有產生圖表，請將它調大。留空則使用預設值。",
         "panelVisibility": "大廳面板",
         "panelVisibilityDescription": "選擇在聊天大廳顯示哪些面板。",
         "showRecentChats": "最近聊天",
@@ -369,6 +374,7 @@
         "baseUrlWithExample": "基礎 URL（可選，例如 {example}）",
         "customEndpoint": "自訂端點 URL",
         "minimaxBaseUrlHint": "使用 /anthropic 端點為 Anthropic 相容 API（推薦），或使用 /v1 端點為 OpenAI 相容 API",
+        "mimoBaseUrlHint": "預設地址適用於按量付費金鑰（sk-...）。Token Plan 訂閱用戶（tp-... 金鑰）請設定為 https://token-plan-cn.xiaomimimo.com/v1",
         "models": "模型",
         "customModelId": "自訂模型 ID...",
         "allAdded": "已全部新增",
@@ -400,6 +406,152 @@
         "showUnvalidatedModels": "顯示未驗證的模型",
         "allModelsShown": "顯示所有模型（包括未驗證的）",
         "unvalidatedModelWarning": "此模型尚未驗證",
-        "serverDefaultModel": "伺服器預設模型"
+        "serverDefaultModel": "伺服器預設模型",
+        "showValue": "顯示值",
+        "hideValue": "隱藏值"
+    },
+    "admin": {
+        "title": "管理員設定",
+        "loginPrompt": "輸入管理員密碼（即 ADMIN_PASSWORD 環境變數）以管理伺服器設定。",
+        "password": "密碼",
+        "signIn": "登入",
+        "signingIn": "正在登入…",
+        "loginFailed": "登入失敗",
+        "precedence": "檔案覆蓋環境變數 · 環境變數覆蓋預設值",
+        "notWritable": "此部署環境下設定檔不可寫入（無伺服器平台沒有持久化磁碟）。設定以唯讀方式顯示——請改用環境變數進行設定。",
+        "settingGroups": "設定分組",
+        "enabled": "已啟用",
+        "disabled": "已停用",
+        "enableGroup": "啟用 {group}",
+        "unsavedChanges": "有未儲存的變更",
+        "saved": "設定已儲存，變更立即生效。",
+        "saveFailed": "儲存失敗。請檢查網路連線後重試。",
+        "invalidSettings": "部分設定無效。",
+        "discard": "捨棄",
+        "saveChanges": "儲存變更",
+        "saving": "正在儲存…",
+        "sourceSaved": "已儲存",
+        "sourceEnv": "環境變數",
+        "sourceSavedTitle": "在管理員設定檔中設定",
+        "sourceEnvTitle": "透過環境變數設定",
+        "restartRequired": "需要重新啟動",
+        "modified": "已修改",
+        "notSet": "未設定",
+        "savedReplace": "已儲存（{hint}）——輸入以取代",
+        "showValue": "顯示值",
+        "hideValue": "隱藏值",
+        "removeValue": "移除值",
+        "removeValueTitle": "移除已儲存的值",
+        "resetToDefault": "重設為預設",
+        "models": "模型",
+        "modelsDescription": "面向所有使用者的伺服器端 provider 與模型——無需個人 API 金鑰。當使用者未選擇模型時，使用預設 provider 的第一個模型。",
+        "addProviderHint": "新增一個 provider，為所有使用者提供伺服器端模型。",
+        "selectProviderHint": "選擇或新增一個 provider 以設定其憑證和模型。",
+        "addProviderToOfferModels": "至少新增一個模型，才能向使用者開放此 provider。",
+        "managedViaEnv": "（透過環境變數管理）",
+        "envReadOnly": "在 AI_MODELS_CONFIG / ai-models.json 中定義——此處唯讀。請編輯環境設定以變更。",
+        "defaultModel": "預設模型",
+        "noModelsConfigured": "未設定模型",
+        "modelCount": "{count} 個模型",
+        "modelCountPlural": "{count} 個模型",
+        "default": "預設",
+        "setAsDefault": "設為預設 provider",
+        "defaultProvider": "預設 provider",
+        "modelIdPlaceholder": "模型 ID…",
+        "addModel": "新增模型",
+        "suggested": "推薦",
+        "test": "測試",
+        "testOk": "正常（{ms} 毫秒）",
+        "testFailed": "失敗",
+        "removeModel": "移除 {model}",
+        "deleteProviderTitle": "刪除 {name}？",
+        "deleteProviderDesc": "儲存後，其憑證和模型將從伺服器上移除。",
+        "cancel": "取消",
+        "delete": "刪除",
+        "groups": {
+            "generation": {
+                "title": "生成",
+                "description": "套用於所有聊天請求的輸出參數。"
+            },
+            "access": {
+                "title": "存取控制",
+                "description": "限制誰可以使用此部署。"
+            },
+            "features": {
+                "title": "功能",
+                "description": "選用功能和安全開關。"
+            },
+            "observability": {
+                "title": "可觀測性",
+                "description": "對 LLM 呼叫進行 Langfuse 追蹤。"
+            },
+            "quota": {
+                "title": "配額與速率限制",
+                "description": "按 IP 的用量限制。強制執行需要 DynamoDB 表。"
+            }
+        },
+        "settings": {
+            "TEMPERATURE": {
+                "label": "溫度",
+                "description": "對於拒絕溫度參數的推理模型，請留空。"
+            },
+            "MAX_OUTPUT_TOKENS": {
+                "label": "最大輸出 token 數"
+            },
+            "ACCESS_CODE_LIST": {
+                "label": "存取碼",
+                "description": "以逗號分隔的清單。使用者需輸入其中之一才能聊天。留空 = 開放存取。"
+            },
+            "ENABLE_VLM_VALIDATION": {
+                "label": "VLM 圖表驗證",
+                "description": "使用視覺模型對產生的圖表進行視覺化驗證。"
+            },
+            "VALIDATION_MODEL": {
+                "label": "驗證模型",
+                "description": "留空時回退到預設 AI 模型。"
+            },
+            "VALIDATION_TIMEOUT": {
+                "label": "驗證逾時（毫秒）"
+            },
+            "ENABLE_HISTORY_XML_REPLACE": {
+                "label": "歷史 XML 壓縮",
+                "description": "用占位符取代歷史記錄中的舊圖表 XML。"
+            },
+            "ALLOW_PRIVATE_URLS": {
+                "label": "允許私有 URL",
+                "description": "關閉以阻擋對私有 IP 和內部主機名的請求（SSRF 防護）。"
+            },
+            "LANGFUSE_PUBLIC_KEY": {
+                "label": "Langfuse Public Key"
+            },
+            "LANGFUSE_SECRET_KEY": {
+                "label": "Langfuse Secret Key"
+            },
+            "LANGFUSE_BASEURL": {
+                "label": "Langfuse Base URL"
+            },
+            "DAILY_REQUEST_LIMIT": {
+                "label": "每日請求上限",
+                "description": "每個 IP 每天。"
+            },
+            "DAILY_TOKEN_LIMIT": {
+                "label": "每日 token 上限",
+                "description": "每個 IP 每天。"
+            },
+            "TPM_LIMIT": {
+                "label": "每分鐘 token 數"
+            },
+            "DYNAMODB_QUOTA_TABLE": {
+                "label": "DynamoDB 表",
+                "description": "留空時配額強制執行被停用。"
+            },
+            "DYNAMODB_REGION": {
+                "label": "DynamoDB 區域"
+            },
+            "QUOTA_TIMEZONE": {
+                "label": "配額時區",
+                "description": "每日重置邊界所用的時區。"
+            }
+        }
     }
 }

lib/i18n/dictionaries/zh.json

@@ -34,7 +34,8 @@
         "glm": "GLM",
         "qwen": "Qwen",
         "kimi": "Kimi",
-        "qiniu": "Qiniu"
+        "qiniu": "Qiniu",
+        "mimo": "MiMo (小米)"
     },
     "chat": {
         "placeholder": "描述您的图表或上传文件...",
@@ -102,10 +103,12 @@
         "theme": "主题",
         "themeDescription": "界面和 DrawIO 画布的深色/浅色模式。",
         "drawioStyle": "DrawIO 样式",
-        "drawioStyleDescription": "画布样式：",
-        "switchTo": "切换到",
-        "minimal": "简约",
-        "sketch": "草图",
+        "drawioStyleDescription": "画布样式",
+        "themeDefault": "默认",
+        "themeDark": "深色",
+        "themeMinimal": "简约",
+        "themeSketch": "草图",
+        "themeSimple": "简单",
         "diagramStyle": "图表样式",
         "diagramStyleDescription": "切换简约与精致图表输出模式。",
         "sendShortcut": "发送快捷键",
@@ -129,6 +132,8 @@
         "customSystemMessage": "自定义系统消息",
         "customSystemMessageDescription": "添加自定义指令，将附加到 AI 的系统提示末尾。",
         "customSystemMessagePlaceholder": "例如：图表始终使用蓝色配色方案...",
+        "maxOutputTokens": "最大输出 token 数",
+        "maxOutputTokensDescription": "单次回复的额度，思考过程和图表 XML 共用。如果 AI 一直在思考却没有生成图表，请把它调大。留空则使用默认值。",
         "panelVisibility": "大厅面板",
         "panelVisibilityDescription": "选择在聊天大厅显示哪些面板。",
         "showRecentChats": "最近聊天",
@@ -369,6 +374,7 @@
         "baseUrlWithExample": "基础 URL（可选，例如 {example}）",
         "customEndpoint": "自定义端点 URL",
         "minimaxBaseUrlHint": "使用 /anthropic 端点为 Anthropic 兼容 API（推荐），或使用 /v1 端点为 OpenAI 兼容 API",
+        "mimoBaseUrlHint": "默认地址适用于按量付费密钥（sk-...）。Token Plan 订阅用户（tp-... 密钥）请设置为 https://token-plan-cn.xiaomimimo.com/v1",
         "models": "模型",
         "customModelId": "自定义模型 ID...",
         "allAdded": "已全部添加",
@@ -400,6 +406,152 @@
         "showUnvalidatedModels": "显示未验证的模型",
         "allModelsShown": "显示所有模型（包括未验证的）",
         "unvalidatedModelWarning": "此模型尚未验证",
-        "serverDefaultModel": "服务器默认模型"
+        "serverDefaultModel": "服务器默认模型",
+        "showValue": "显示值",
+        "hideValue": "隐藏值"
+    },
+    "admin": {
+        "title": "管理员设置",
+        "loginPrompt": "输入管理员密码（即 ADMIN_PASSWORD 环境变量）以管理服务器设置。",
+        "password": "密码",
+        "signIn": "登录",
+        "signingIn": "正在登录…",
+        "loginFailed": "登录失败",
+        "precedence": "文件覆盖环境变量 · 环境变量覆盖默认值",
+        "notWritable": "此部署环境下设置文件不可写（无服务器平台没有持久化磁盘）。设置以只读方式显示——请改用环境变量进行配置。",
+        "settingGroups": "设置分组",
+        "enabled": "已启用",
+        "disabled": "已禁用",
+        "enableGroup": "启用 {group}",
+        "unsavedChanges": "有未保存的更改",
+        "saved": "设置已保存，更改立即生效。",
+        "saveFailed": "保存失败。请检查网络连接后重试。",
+        "invalidSettings": "部分设置无效。",
+        "discard": "放弃",
+        "saveChanges": "保存更改",
+        "saving": "正在保存…",
+        "sourceSaved": "已保存",
+        "sourceEnv": "环境变量",
+        "sourceSavedTitle": "在管理员设置文件中设置",
+        "sourceEnvTitle": "通过环境变量设置",
+        "restartRequired": "需要重启",
+        "modified": "已修改",
+        "notSet": "未设置",
+        "savedReplace": "已保存（{hint}）——输入以替换",
+        "showValue": "显示值",
+        "hideValue": "隐藏值",
+        "removeValue": "移除值",
+        "removeValueTitle": "移除已保存的值",
+        "resetToDefault": "恢复默认",
+        "models": "模型",
+        "modelsDescription": "面向所有用户的服务端 provider 和模型——无需个人 API 密钥。当用户未选择模型时，使用默认 provider 的第一个模型。",
+        "addProviderHint": "添加一个 provider，为所有用户提供服务端模型。",
+        "selectProviderHint": "选择或添加一个 provider 以配置其凭证和模型。",
+        "addProviderToOfferModels": "至少添加一个模型，才能向用户开放此 provider。",
+        "managedViaEnv": "（通过环境变量管理）",
+        "envReadOnly": "在 AI_MODELS_CONFIG / ai-models.json 中定义——此处只读。请编辑环境配置以更改。",
+        "defaultModel": "默认模型",
+        "noModelsConfigured": "未配置模型",
+        "modelCount": "{count} 个模型",
+        "modelCountPlural": "{count} 个模型",
+        "default": "默认",
+        "setAsDefault": "设为默认 provider",
+        "defaultProvider": "默认 provider",
+        "modelIdPlaceholder": "模型 ID…",
+        "addModel": "添加模型",
+        "suggested": "推荐",
+        "test": "测试",
+        "testOk": "正常（{ms} 毫秒）",
+        "testFailed": "失败",
+        "removeModel": "移除 {model}",
+        "deleteProviderTitle": "删除 {name}？",
+        "deleteProviderDesc": "保存后，其凭证和模型将从服务器上移除。",
+        "cancel": "取消",
+        "delete": "删除",
+        "groups": {
+            "generation": {
+                "title": "生成",
+                "description": "应用于所有聊天请求的输出参数。"
+            },
+            "access": {
+                "title": "访问控制",
+                "description": "限制谁可以使用此部署。"
+            },
+            "features": {
+                "title": "功能",
+                "description": "可选功能和安全开关。"
+            },
+            "observability": {
+                "title": "可观测性",
+                "description": "对 LLM 调用进行 Langfuse 追踪。"
+            },
+            "quota": {
+                "title": "配额与速率限制",
+                "description": "按 IP 的用量限制。强制执行需要 DynamoDB 表。"
+            }
+        },
+        "settings": {
+            "TEMPERATURE": {
+                "label": "温度",
+                "description": "对于拒绝温度参数的推理模型，请留空。"
+            },
+            "MAX_OUTPUT_TOKENS": {
+                "label": "最大输出 token 数"
+            },
+            "ACCESS_CODE_LIST": {
+                "label": "访问码",
+                "description": "以逗号分隔的列表。用户需输入其中之一才能聊天。留空 = 开放访问。"
+            },
+            "ENABLE_VLM_VALIDATION": {
+                "label": "VLM 图表验证",
+                "description": "使用视觉模型对生成的图表进行可视化验证。"
+            },
+            "VALIDATION_MODEL": {
+                "label": "验证模型",
+                "description": "留空时回退到默认 AI 模型。"
+            },
+            "VALIDATION_TIMEOUT": {
+                "label": "验证超时（毫秒）"
+            },
+            "ENABLE_HISTORY_XML_REPLACE": {
+                "label": "历史 XML 压缩",
+                "description": "用占位符替换历史记录中的旧图表 XML。"
+            },
+            "ALLOW_PRIVATE_URLS": {
+                "label": "允许私有 URL",
+                "description": "关闭以阻止对私有 IP 和内部主机名的请求（SSRF 防护）。"
+            },
+            "LANGFUSE_PUBLIC_KEY": {
+                "label": "Langfuse Public Key"
+            },
+            "LANGFUSE_SECRET_KEY": {
+                "label": "Langfuse Secret Key"
+            },
+            "LANGFUSE_BASEURL": {
+                "label": "Langfuse Base URL"
+            },
+            "DAILY_REQUEST_LIMIT": {
+                "label": "每日请求上限",
+                "description": "每个 IP 每天。"
+            },
+            "DAILY_TOKEN_LIMIT": {
+                "label": "每日 token 上限",
+                "description": "每个 IP 每天。"
+            },
+            "TPM_LIMIT": {
+                "label": "每分钟 token 数"
+            },
+            "DYNAMODB_QUOTA_TABLE": {
+                "label": "DynamoDB 表",
+                "description": "留空时配额强制执行被禁用。"
+            },
+            "DYNAMODB_REGION": {
+                "label": "DynamoDB 区域"
+            },
+            "QUOTA_TIMEZONE": {
+                "label": "配额时区",
+                "description": "每日重置边界所用的时区。"
+            }
+        }
     }
 }

lib/output-token-limit.ts

@@ -0,0 +1,145 @@
+import { wrapLanguageModel } from "ai"
+
+type WrappedModel = ReturnType<typeof wrapLanguageModel>
+
+/**
+ * Default output budget for a chat turn.
+ *
+ * This has to cover thinking + prose + the tool call, because reasoning models
+ * spend it in that order. Measured on deepseek-v4-flash: refining an existing
+ * diagram burned 16000 tokens on thinking alone and the request ended with
+ * finishReason "length" before display_diagram was ever called (issue #924).
+ * 64000 leaves room for the plan and the XML in one turn.
+ */
+export const DEFAULT_MAX_OUTPUT_TOKENS = 64000
+
+/** Ceiling for the user-supplied override, to catch typos like an extra zero. */
+export const MAX_OUTPUT_TOKENS_LIMIT = 200000
+
+/**
+ * Below this a diagram cannot come out whole, so a retry would just produce
+ * truncated XML instead of the provider's error. Better to surface the error.
+ */
+const MIN_USABLE_OUTPUT_TOKENS = 1024
+
+/** Status codes that can carry a complaint about the requested budget. */
+const BUDGET_REJECTION_STATUSES = new Set([400, 422])
+
+function usableLimit(value: number): number | null {
+    return value >= MIN_USABLE_OUTPUT_TOKENS ? value : null
+}
+
+/**
+ * A budget this large exceeds what some models accept. Providers reject it with a
+ * 400 that names the real limit, so we parse the number out and retry once
+ * instead of failing the turn.
+ *
+ * Formats seen in the wild:
+ * - Bedrock: "The maximum tokens you requested exceeds the model limit of 4096."
+ * - OpenRouter: "This endpoint's maximum context length is 64000 tokens. However,
+ *   you requested about 64025 tokens (25 of text input, 64000 in the output)."
+ *   Note this one is an input+output ceiling, so the input has to be subtracted.
+ * - Anthropic: "max_tokens: 200000 > 64000, which is the maximum allowed..."
+ * - OpenAI: "This model supports at most 16384 completion tokens"
+ *
+ * Every pattern names tokens explicitly. A generic one (an earlier draft matched
+ * "lower than N") would reinterpret unrelated failures, and retrying on a bogus
+ * number turns a readable error into an empty diagram.
+ */
+export function parseOutputTokenLimit(error: unknown): number | null {
+    const err = error as {
+        message?: unknown
+        responseBody?: unknown
+        statusCode?: unknown
+    }
+
+    // An auth or rate-limit failure is not about the budget, so leave it alone.
+    if (
+        typeof err?.statusCode === "number" &&
+        !BUDGET_REJECTION_STATUSES.has(err.statusCode)
+    ) {
+        return null
+    }
+
+    const text = [
+        typeof err?.message === "string" ? err.message : "",
+        typeof err?.responseBody === "string" ? err.responseBody : "",
+    ].join(" ")
+
+    if (!text) return null
+
+    // Combined input+output ceiling: subtract the input the provider counted,
+    // plus a small margin because its estimate is approximate.
+    const context = text.match(/maximum context length is (\d+)/i)
+    if (context) {
+        const input = text.match(/(\d+) of text input/i)
+        return usableLimit(
+            Number(context[1]) - (input ? Number(input[1]) : 0) - 1024,
+        )
+    }
+
+    const output =
+        text.match(/model limit of (\d+)/i) ||
+        text.match(/> (\d+), which is the maximum/i) ||
+        text.match(/at most (\d+) completion tokens/i)
+
+    return output ? usableLimit(Number(output[1])) : null
+}
+
+/**
+ * Retry the stream once with a smaller budget when the provider rejects the
+ * requested one. Without this, raising the default breaks every model whose
+ * ceiling is below it (measured: bedrock claude-3-haiku 4096, nova-lite 10000,
+ * openrouter deepseek-r1 64000 shared with the input).
+ */
+export function withOutputTokenLimitFallback(
+    model: WrappedModel,
+): WrappedModel {
+    return wrapLanguageModel({
+        model,
+        middleware: {
+            specificationVersion: "v3",
+            async wrapStream({ doStream, params, model: inner }) {
+                try {
+                    return await doStream()
+                } catch (error) {
+                    const limit = parseOutputTokenLimit(error)
+                    const requested = params.maxOutputTokens
+
+                    if (!limit || !requested || limit >= requested) throw error
+
+                    console.warn(
+                        `[maxOutputTokens] ${requested} rejected, retrying with ${limit}`,
+                    )
+                    return await inner.doStream({
+                        ...params,
+                        maxOutputTokens: limit,
+                    })
+                }
+            },
+        },
+    })
+}
+
+function validBudget(value: string | null | undefined): number | null {
+    const parsed = Number(value)
+    return Number.isInteger(parsed) &&
+        parsed > 0 &&
+        parsed <= MAX_OUTPUT_TOKENS_LIMIT
+        ? parsed
+        : null
+}
+
+/**
+ * Resolve the output budget: user setting (sent as a header so it works in the
+ * desktop app too), then server env, then the default. Both sources go through
+ * the same validation, so a typo in either falls back instead of reaching the
+ * provider.
+ */
+export function resolveMaxOutputTokens(headerValue: string | null): number {
+    return (
+        validBudget(headerValue) ??
+        validBudget(process.env.MAX_OUTPUT_TOKENS) ??
+        DEFAULT_MAX_OUTPUT_TOKENS
+    )
+}

lib/server-model-config.ts

@@ -62,7 +62,54 @@ function getConfigPath(): string {
     return path.join(process.cwd(), "ai-models.json")
 }
 
-export async function loadRawServerModelsConfig(): Promise<ServerModelsConfig | null> {
+/**
+ * Synthesize a config from a comma-separated AI_MODEL value (Priority 3 fallback).
+ * Lets users expose multiple models without authoring AI_MODELS_CONFIG / ai-models.json.
+ * Triggers only when AI_MODEL contains a comma AND AI_PROVIDER is set to a known provider.
+ */
+function configFromCommaSeparatedAiModel(): ServerModelsConfig | null {
+    const aiModel = process.env.AI_MODEL
+    if (!aiModel || !aiModel.includes(",")) return null
+
+    const aiProvider = process.env.AI_PROVIDER
+    if (!aiProvider) {
+        console.warn(
+            "[server-model-config] AI_MODEL contains commas but AI_PROVIDER is not set; " +
+                "skipping multi-model fallback. Set AI_PROVIDER, or use AI_MODELS_CONFIG / ai-models.json.",
+        )
+        return null
+    }
+    if (!(aiProvider in PROVIDER_INFO)) {
+        console.warn(
+            `[server-model-config] AI_PROVIDER="${aiProvider}" is not a known provider; skipping multi-model fallback.`,
+        )
+        return null
+    }
+
+    const models = Array.from(
+        new Set(
+            aiModel
+                .split(",")
+                .map((s) => s.trim())
+                .filter((s) => s.length > 0),
+        ),
+    )
+    if (models.length === 0) return null
+
+    const providerName = aiProvider as ProviderName
+    return {
+        providers: [
+            {
+                name: PROVIDER_INFO[providerName]?.label || providerName,
+                provider: providerName,
+                models,
+                default: true,
+            },
+        ],
+    }
+}
+
+export async function loadEnvServerModelsConfig(): Promise<ServerModelsConfig | null> {
     // Priority 1: AI_MODELS_CONFIG env var (JSON string) - for cloud deployments
     const envConfig = process.env.AI_MODELS_CONFIG
     if (envConfig && envConfig.trim().length > 0) {
@@ -85,15 +132,51 @@ export async function loadRawServerModelsConfig(): Promise<ServerModelsConfig |
         const json = JSON.parse(jsonStr)
         return ServerModelsConfigSchema.parse(json)
     } catch (err: any) {
-        if (err?.code === "ENOENT") {
+        if (err?.code !== "ENOENT") {
+            console.error(
+                "[server-model-config] Failed to load ai-models.json:",
+                err,
+            )
             return null
         }
+    }
+
+    // Priority 3: AI_MODEL with comma-separated values + AI_PROVIDER
+    return configFromCommaSeparatedAiModel()
+}
+
+export async function loadRawServerModelsConfig(): Promise<ServerModelsConfig | null> {
+    const envConfig = await loadEnvServerModelsConfig()
+
+    // Merge in providers managed via the admin panel (settings.json).
+    // Dynamic import to avoid a module-init cycle with lib/admin/providers.
+    let adminConfig: ServerModelsConfig | null = null
+    try {
+        const { adminProvidersToConfig, loadAdminProviders } = await import(
+            "./admin/providers"
+        )
+        const adminProviders = loadAdminProviders()
+        if (adminProviders.length > 0) {
+            adminConfig = adminProvidersToConfig(adminProviders)
+        }
+    } catch (err) {
         console.error(
-            "[server-model-config] Failed to load ai-models.json:",
+            "[server-model-config] Failed to load admin providers:",
             err,
         )
-        return null
     }
+
+    if (!adminConfig || adminConfig.providers.length === 0) return envConfig
+    if (!envConfig) return adminConfig
+
+    // A panel default overrides an env default
+    const adminHasDefault = adminConfig.providers.some((p) => p.default)
+    const envProviders = adminHasDefault
+        ? envConfig.providers.map((p) =>
+              p.default ? { ...p, default: undefined } : p,
+          )
+        : envConfig.providers
+    return { providers: [...envProviders, ...adminConfig.providers] }
 }
 
 export async function loadFlattenedServerModels(): Promise<

lib/session-storage.ts

@@ -58,33 +58,6 @@ interface ChatSessionDB extends DBSchema {
 
 // Database singleton
 let dbPromise: Promise<IDBPDatabase<ChatSessionDB>> | null = null
-const resetDBPromise = () => {
-    dbPromise = null
-}
-
-const isClosingError = (error: unknown): boolean => {
-    return (
-        error instanceof DOMException &&
-        error.name === "InvalidStateError" &&
-        /closing/i.test(error.message)
-    )
-}
-
-const withDB = async <T>(
-    action: (db: IDBPDatabase<ChatSessionDB>) => Promise<T>,
-): Promise<T> => {
-    try {
-        const db = await getDB()
-        return await action(db)
-    } catch (error) {
-        if (isClosingError(error)) {
-            resetDBPromise()
-            const db = await getDB()
-            return await action(db)
-        }
-        throw error
-    }
-}
 
 async function getDB(): Promise<IDBPDatabase<ChatSessionDB>> {
     if (!dbPromise) {
@@ -115,23 +88,7 @@ async function getDB(): Promise<IDBPDatabase<ChatSessionDB>> {
                     }
                 }
             },
-            terminated() {
-                resetDBPromise()
-            },
         })
-        dbPromise
-            .then((db) => {
-                db.onversionchange = () => {
-                    db.close()
-                    resetDBPromise()
-                }
-                db.onclose = () => {
-                    resetDBPromise()
-                }
-            })
-            .catch(() => {
-                resetDBPromise()
-            })
     }
     return dbPromise
 }
@@ -146,46 +103,31 @@ export function isIndexedDBAvailable(): boolean {
     }
 }
 
-// Check if IndexedDB is actually usable (not just present).
-// Note: Do NOT close the db here - getDB() returns a shared singleton connection
-// that other code depends on.
-export async function isIndexedDBUsable(): Promise<boolean> {
-    if (!isIndexedDBAvailable()) return false
-    try {
-        await getDB()
-        return true
-    } catch {
-        return false
-    }
-}
-
 // CRUD Operations
 export async function getAllSessionMetadata(): Promise<SessionMetadata[]> {
     if (!isIndexedDBAvailable()) return []
     try {
-        return await withDB(async (db) => {
-            const tx = db.transaction(STORE_NAME, "readonly")
-            const index = tx.store.index("by-updated")
-            const metadata: SessionMetadata[] = []
+        const db = await getDB()
+        const tx = db.transaction(STORE_NAME, "readonly")
+        const index = tx.store.index("by-updated")
+        const metadata: SessionMetadata[] = []
 
-            // Use cursor to read only metadata fields (avoids loading full messages/XML)
-            let cursor = await index.openCursor(null, "prev") // newest first
-            while (cursor) {
-                const s = cursor.value
-                metadata.push({
-                    id: s.id,
-                    title: s.title,
-                    createdAt: s.createdAt,
-                    updatedAt: s.updatedAt,
-                    messageCount: s.messages.length,
-                    hasDiagram:
-                        !!s.diagramXml && s.diagramXml.trim().length > 0,
-                    thumbnailDataUrl: s.thumbnailDataUrl,
-                })
-                cursor = await cursor.continue()
-            }
-            return metadata
-        })
+        // Use cursor to read only metadata fields (avoids loading full messages/XML)
+        let cursor = await index.openCursor(null, "prev") // newest first
+        while (cursor) {
+            const s = cursor.value
+            metadata.push({
+                id: s.id,
+                title: s.title,
+                createdAt: s.createdAt,
+                updatedAt: s.updatedAt,
+                messageCount: s.messages.length,
+                hasDiagram: !!s.diagramXml && s.diagramXml.trim().length > 0,
+                thumbnailDataUrl: s.thumbnailDataUrl,
+            })
+            cursor = await cursor.continue()
+        }
+        return metadata
     } catch (error) {
         console.error("Failed to get session metadata:", error)
         return []
@@ -195,9 +137,8 @@ export async function getAllSessionMetadata(): Promise<SessionMetadata[]> {
 export async function getSession(id: string): Promise<ChatSession | null> {
     if (!isIndexedDBAvailable()) return null
     try {
-        return await withDB(async (db) => {
-            return (await db.get(STORE_NAME, id)) || null
-        })
+        const db = await getDB()
+        return (await db.get(STORE_NAME, id)) || null
     } catch (error) {
         console.error("Failed to get session:", error)
         return null
@@ -207,9 +148,8 @@ export async function getSession(id: string): Promise<ChatSession | null> {
 export async function saveSession(session: ChatSession): Promise<boolean> {
     if (!isIndexedDBAvailable()) return false
     try {
-        await withDB(async (db) => {
-            await db.put(STORE_NAME, session)
-        })
+        const db = await getDB()
+        await db.put(STORE_NAME, session)
         return true
     } catch (error) {
         // Handle quota exceeded
@@ -221,9 +161,8 @@ export async function saveSession(session: ChatSession): Promise<boolean> {
             await deleteOldestSession()
             // Retry once
             try {
-                await withDB(async (db) => {
-                    await db.put(STORE_NAME, session)
-                })
+                const db = await getDB()
+                await db.put(STORE_NAME, session)
                 return true
             } catch (retryError) {
                 console.error(
@@ -242,9 +181,8 @@ export async function saveSession(session: ChatSession): Promise<boolean> {
 export async function deleteSession(id: string): Promise<void> {
     if (!isIndexedDBAvailable()) return
     try {
-        await withDB(async (db) => {
-            await db.delete(STORE_NAME, id)
-        })
+        const db = await getDB()
+        await db.delete(STORE_NAME, id)
     } catch (error) {
         console.error("Failed to delete session:", error)
     }
@@ -253,9 +191,8 @@ export async function deleteSession(id: string): Promise<void> {
 export async function getSessionCount(): Promise<number> {
     if (!isIndexedDBAvailable()) return 0
     try {
-        return await withDB(async (db) => {
-            return await db.count(STORE_NAME)
-        })
+        const db = await getDB()
+        return await db.count(STORE_NAME)
     } catch (error) {
         console.error("Failed to get session count:", error)
         return 0
@@ -265,15 +202,14 @@ export async function getSessionCount(): Promise<number> {
 export async function deleteOldestSession(): Promise<void> {
     if (!isIndexedDBAvailable()) return
     try {
-        await withDB(async (db) => {
-            const tx = db.transaction(STORE_NAME, "readwrite")
-            const index = tx.store.index("by-updated")
-            const cursor = await index.openCursor()
-            if (cursor) {
-                await cursor.delete()
-            }
-            await tx.done
-        })
+        const db = await getDB()
+        const tx = db.transaction(STORE_NAME, "readwrite")
+        const index = tx.store.index("by-updated")
+        const cursor = await index.openCursor()
+        if (cursor) {
+            await cursor.delete()
+        }
+        await tx.done
     } catch (error) {
         console.error("Failed to delete oldest session:", error)
     }

lib/ssrf-protection.ts

@@ -2,62 +2,116 @@
  * SSRF (Server-Side Request Forgery) protection utilities
  */
 
+import { lookup } from "node:dns/promises"
+
 /**
- * Check if URL points to private/internal network
- * Blocks: localhost, private IPs, link-local, AWS metadata service
+ * Check if an IP address (IPv4 or IPv6) belongs to a private/internal range.
+ * Works for both user-supplied literal IPs and DNS-resolved addresses.
  */
-export function isPrivateUrl(urlString: string): boolean {
+function isPrivateIp(ip: string): boolean {
+    const addr = ip.toLowerCase().replace(/^\[|\]$/g, "")
+
+    // IPv6
+    if (addr.includes(":")) {
+        if (addr === "::1" || addr === "::") return true
+        // unique-local (fc00::/7) and IPv4-mapped (::ffff:0:0/96)
+        if (
+            addr.startsWith("fc") ||
+            addr.startsWith("fd") ||
+            addr.startsWith("::ffff:")
+        ) {
+            return true
+        }
+        // link-local (fe80::/10)
+        const linkLocal = addr.match(/^fe([0-9a-f]{2}):/)
+        if (linkLocal) {
+            const high = parseInt(linkLocal[1], 16)
+            if (high >= 0x80 && high <= 0xbf) return true
+        }
+        return false
+    }
+
+    // IPv4
+    const ipv4Match = addr.match(/^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/)
+    if (ipv4Match) {
+        const [, a, b] = ipv4Match.map(Number)
+        if (a === 10) return true // 10.0.0.0/8
+        if (a === 172 && b >= 16 && b <= 31) return true // 172.16.0.0/12
+        if (a === 192 && b === 168) return true // 192.168.0.0/16
+        if (a === 169 && b === 254) return true // 169.254.0.0/16 (link-local)
+        if (a === 127) return true // 127.0.0.0/8 (loopback)
+        if (a === 0) return true // 0.0.0.0/8
+        if (a === 100 && b >= 64 && b <= 127) return true // 100.64.0.0/10 (CGNAT, used by some cloud internal networks)
+    }
+
+    return false
+}
+
+/**
+ * String-only check against well-known private hostnames and literal IPs.
+ * Fast path that avoids a DNS lookup for obvious cases.
+ */
+function isPrivateHostname(hostname: string): boolean {
+    const host = hostname
+        .toLowerCase()
+        .replace(/^\[|\]$/g, "")
+        .replace(/\.$/, "")
+
+    if (
+        host === "localhost" ||
+        host === "127.0.0.1" ||
+        host === "::1" ||
+        host === "::"
+    ) {
+        return true
+    }
+
+    if (host === "169.254.169.254" || host === "metadata.google.internal") {
+        return true
+    }
+
+    if (
+        host.endsWith(".local") ||
+        host.endsWith(".internal") ||
+        host.endsWith(".localhost")
+    ) {
+        return true
+    }
+
+    // Literal IP supplied directly in the URL
+    return isPrivateIp(host)
+}
+
+/**
+ * Check if URL points to private/internal network.
+ * Blocks: localhost, private IPs, link-local, AWS metadata service.
+ *
+ * Resolves the hostname via DNS and validates every returned address, so
+ * public-looking names that map to internal IPs (e.g. "127-0-0-1.sslip.io")
+ * are caught even though they pass the string-only check.
+ */
+export async function isPrivateUrl(urlString: string): Promise<boolean> {
     try {
         const url = new URL(urlString)
-        const hostname = url.hostname.toLowerCase()
+        const hostname = url.hostname
 
-        // Block localhost
-        if (
-            hostname === "localhost" ||
-            hostname === "127.0.0.1" ||
-            hostname === "::1"
-        ) {
-            return true
-        }
+        // Fast path: obvious string matches and literal IPs.
+        if (isPrivateHostname(hostname)) return true
 
-        // Block AWS/cloud metadata endpoints
-        if (
-            hostname === "169.254.169.254" ||
-            hostname === "metadata.google.internal"
-        ) {
-            return true
-        }
-
-        // Check for private IPv4 ranges
-        const ipv4Match = hostname.match(
-            /^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/,
-        )
-        if (ipv4Match) {
-            const [, a, b] = ipv4Match.map(Number)
-            if (a === 10) return true // 10.0.0.0/8
-            if (a === 172 && b >= 16 && b <= 31) return true // 172.16.0.0/12
-            if (a === 192 && b === 168) return true // 192.168.0.0/16
-            if (a === 169 && b === 254) return true // 169.254.0.0/16 (link-local)
-            if (a === 127) return true // 127.0.0.0/8 (loopback)
-        }
-
-        // Block common internal hostnames
-        if (
-            hostname.endsWith(".local") ||
-            hostname.endsWith(".internal") ||
-            hostname.endsWith(".localhost")
-        ) {
-            return true
-        }
-
-        return false
+        // Resolve DNS and reject if any address is private.
+        const stripped = hostname.replace(/^\[|\]$/g, "").replace(/\.$/, "")
+        const addresses = await lookup(stripped, { all: true })
+        return addresses.some(({ address }) => isPrivateIp(address))
     } catch {
-        return true // Invalid URL - block it
+        return true // Invalid URL or DNS failure - block it
     }
 }
 
 /**
  * Whether private URLs are allowed (defaults to true)
  * Set ALLOW_PRIVATE_URLS=false to block private URLs
+ * Read per call so admin-panel changes apply without restart
  */
-export const allowPrivateUrls = process.env.ALLOW_PRIVATE_URLS !== "false"
+export function allowPrivateUrls(): boolean {
+    return process.env.ALLOW_PRIVATE_URLS !== "false"
+}

lib/storage.ts

@@ -31,6 +31,9 @@ export const STORAGE_KEYS = {
     // Custom system message
     customSystemMessage: "next-ai-draw-io-custom-system-message",
 
+    // Output token budget per turn (empty = server default)
+    maxOutputTokens: "next-ai-draw-io-max-output-tokens",
+
     // Panel visibility
     showRecentChats: "next-ai-draw-io-show-recent-chats",
     showMyTemplates: "next-ai-draw-io-show-my-templates",

lib/template-storage.ts

@@ -57,33 +57,6 @@ export function generateDefaultTitle(prompt: string): string {
 
 // Database singleton
 let dbPromise: Promise<IDBPDatabase<TemplateDB>> | null = null
-const resetDBPromise = () => {
-    dbPromise = null
-}
-
-const isClosingError = (error: unknown): boolean => {
-    return (
-        error instanceof DOMException &&
-        error.name === "InvalidStateError" &&
-        /closing/i.test(error.message)
-    )
-}
-
-const withDB = async <T>(
-    action: (db: IDBPDatabase<TemplateDB>) => Promise<T>,
-): Promise<T> => {
-    try {
-        const db = await getDB()
-        return await action(db)
-    } catch (error) {
-        if (isClosingError(error)) {
-            resetDBPromise()
-            const db = await getDB()
-            return await action(db)
-        }
-        throw error
-    }
-}
 
 async function getDB(): Promise<IDBPDatabase<TemplateDB>> {
     if (!dbPromise) {
@@ -101,23 +74,7 @@ async function getDB(): Promise<IDBPDatabase<TemplateDB>> {
                     }
                 }
             },
-            terminated() {
-                resetDBPromise()
-            },
         })
-        dbPromise
-            .then((db) => {
-                db.onversionchange = () => {
-                    db.close()
-                    resetDBPromise()
-                }
-                db.onclose = () => {
-                    resetDBPromise()
-                }
-            })
-            .catch(() => {
-                resetDBPromise()
-            })
     }
     return dbPromise
 }
@@ -137,10 +94,9 @@ export function isIndexedDBAvailable(): boolean {
 export async function getAllTemplates(): Promise<Template[]> {
     if (!isIndexedDBAvailable()) return []
     try {
-        return await withDB(async (db) => {
-            const templates = await db.getAll(STORE_NAME)
-            return sortTemplates(templates)
-        })
+        const db = await getDB()
+        const templates = await db.getAll(STORE_NAME)
+        return sortTemplates(templates)
     } catch (error) {
         console.error("Failed to get templates:", error)
         return []
@@ -150,9 +106,8 @@ export async function getAllTemplates(): Promise<Template[]> {
 export async function getTemplate(id: string): Promise<Template | null> {
     if (!isIndexedDBAvailable()) return null
     try {
-        return await withDB(async (db) => {
-            return (await db.get(STORE_NAME, id)) || null
-        })
+        const db = await getDB()
+        return (await db.get(STORE_NAME, id)) || null
     } catch (error) {
         console.error("Failed to get template:", error)
         return null
@@ -182,9 +137,8 @@ export async function createTemplate(
     }
 
     try {
-        await withDB(async (db) => {
-            await db.put(STORE_NAME, template)
-        })
+        const db = await getDB()
+        await db.put(STORE_NAME, template)
         return template
     } catch (error) {
         console.error("Failed to create template:", error)
@@ -198,20 +152,19 @@ export async function updateTemplate(
 ): Promise<Template | null> {
     if (!isIndexedDBAvailable()) return null
     try {
-        return await withDB(async (db) => {
-            const existing = await db.get(STORE_NAME, id)
-            if (!existing) return null
+        const db = await getDB()
+        const existing = await db.get(STORE_NAME, id)
+        if (!existing) return null
 
-            const updated: Template = {
-                ...existing,
-                ...updates,
-                id: existing.id,
-                createdAt: existing.createdAt,
-                updatedAt: Date.now(),
-            }
-            await db.put(STORE_NAME, updated)
-            return updated
-        })
+        const updated: Template = {
+            ...existing,
+            ...updates,
+            id: existing.id,
+            createdAt: existing.createdAt,
+            updatedAt: Date.now(),
+        }
+        await db.put(STORE_NAME, updated)
+        return updated
     } catch (error) {
         console.error("Failed to update template:", error)
         return null
@@ -221,9 +174,8 @@ export async function updateTemplate(
 export async function deleteTemplate(id: string): Promise<boolean> {
     if (!isIndexedDBAvailable()) return false
     try {
-        await withDB(async (db) => {
-            await db.delete(STORE_NAME, id)
-        })
+        const db = await getDB()
+        await db.delete(STORE_NAME, id)
         return true
     } catch (error) {
         console.error("Failed to delete template:", error)
@@ -237,25 +189,24 @@ export async function duplicateTemplate(
 ): Promise<Template | null> {
     if (!isIndexedDBAvailable()) return null
     try {
-        return await withDB(async (db) => {
-            const existing = await db.get(STORE_NAME, id)
-            if (!existing) return null
+        const db = await getDB()
+        const existing = await db.get(STORE_NAME, id)
+        if (!existing) return null
 
-            const now = Date.now()
-            const duplicate: Template = {
-                ...existing,
-                id: nanoid(),
-                title: `${existing.title} ${copySuffix}`,
-                createdAt: now,
-                updatedAt: now,
-                clickCount: 0,
-                runCount: 0,
-                lastUsedAt: 0,
-                pinned: false,
-            }
-            await db.put(STORE_NAME, duplicate)
-            return duplicate
-        })
+        const now = Date.now()
+        const duplicate: Template = {
+            ...existing,
+            id: nanoid(),
+            title: `${existing.title} ${copySuffix}`,
+            createdAt: now,
+            updatedAt: now,
+            clickCount: 0,
+            runCount: 0,
+            lastUsedAt: 0,
+            pinned: false,
+        }
+        await db.put(STORE_NAME, duplicate)
+        return duplicate
     } catch (error) {
         console.error("Failed to duplicate template:", error)
         return null
@@ -267,13 +218,12 @@ export async function duplicateTemplate(
 export async function incrementClickCount(id: string): Promise<void> {
     if (!isIndexedDBAvailable()) return
     try {
-        await withDB(async (db) => {
-            const template = await db.get(STORE_NAME, id)
-            if (!template) return
-            template.clickCount += 1
-            template.updatedAt = Date.now()
-            await db.put(STORE_NAME, template)
-        })
+        const db = await getDB()
+        const template = await db.get(STORE_NAME, id)
+        if (!template) return
+        template.clickCount += 1
+        template.updatedAt = Date.now()
+        await db.put(STORE_NAME, template)
     } catch (error) {
         console.error("Failed to increment click count:", error)
     }
@@ -282,15 +232,14 @@ export async function incrementClickCount(id: string): Promise<void> {
 export async function incrementRunCount(id: string): Promise<void> {
     if (!isIndexedDBAvailable()) return
     try {
-        await withDB(async (db) => {
-            const template = await db.get(STORE_NAME, id)
-            if (!template) return
-            const now = Date.now()
-            template.runCount += 1
-            template.lastUsedAt = now
-            template.updatedAt = now
-            await db.put(STORE_NAME, template)
-        })
+        const db = await getDB()
+        const template = await db.get(STORE_NAME, id)
+        if (!template) return
+        const now = Date.now()
+        template.runCount += 1
+        template.lastUsedAt = now
+        template.updatedAt = now
+        await db.put(STORE_NAME, template)
     } catch (error) {
         console.error("Failed to increment run count:", error)
     }
@@ -423,9 +372,8 @@ export async function importTemplates(
             pinned: typeof t.pinned === "boolean" ? t.pinned : false,
         }
         try {
-            await withDB(async (db) => {
-                await db.put(STORE_NAME, newTemplate)
-            })
+            const db = await getDB()
+            await db.put(STORE_NAME, newTemplate)
             existingKeys.add(key)
             imported++
         } catch (error) {

lib/types/model-config.ts

@@ -9,6 +9,7 @@ export type ProviderName =
     | "bedrock"
     | "ollama"
     | "openrouter"
+    | "aihubmix"
     | "deepseek"
     | "siliconflow"
     | "sglang"
@@ -22,6 +23,8 @@ export type ProviderName =
     | "kimi"
     | "minimax"
     | "novita"
+    | "mimo"
+    | "atlascloud"
 
 // Individual model configuration
 export interface ModelConfig {
@@ -85,6 +88,15 @@ export interface FlattenedModel {
     baseUrlEnv?: string
 }
 
+// Providers whose server credentials live in fixed env vars
+// (AWS_ACCESS_KEY_ID, GOOGLE_VERTEX_API_KEY, OLLAMA_API_KEY) with no
+// apiKeyEnv redirection support — their credentials are global
+export const FIXED_CRED_PROVIDERS: ProviderName[] = [
+    "bedrock",
+    "vertexai",
+    "ollama",
+]
+
 // Map provider names to models.dev logo names
 export const PROVIDER_LOGO_MAP: Record<string, string> = {
     openai: "openai",
@@ -93,6 +105,7 @@ export const PROVIDER_LOGO_MAP: Record<string, string> = {
     azure: "azure",
     bedrock: "amazon-bedrock",
     openrouter: "openrouter",
+    aihubmix: "aihubmix",
     deepseek: "deepseek",
     siliconflow: "siliconflow",
     sglang: "openai", // SGLang is OpenAI-compatible
@@ -103,6 +116,8 @@ export const PROVIDER_LOGO_MAP: Record<string, string> = {
     modelscope: "modelscope",
     minimax: "minimax",
     novita: "novita",
+    mimo: "xiaomi",
+    atlascloud: "openai",
 }
 
 // Provider metadata
@@ -136,6 +151,10 @@ export const PROVIDER_INFO: Record<
         label: "OpenRouter",
         defaultBaseUrl: "https://openrouter.ai/api/v1",
     },
+    aihubmix: {
+        label: "AIHubMix",
+        defaultBaseUrl: "https://aihubmix.com/v1",
+    },
     deepseek: {
         label: "DeepSeek",
         defaultBaseUrl: "https://api.deepseek.com/v1",
@@ -185,183 +204,253 @@ export const PROVIDER_INFO: Record<
         label: "Novita AI",
         defaultBaseUrl: "https://api.novita.ai/openai",
     },
+    mimo: {
+        label: "MiMo (Xiaomi)",
+        defaultBaseUrl: "https://api.xiaomimimo.com/v1",
+    },
+    atlascloud: {
+        label: "Atlas Cloud",
+        defaultBaseUrl: "https://api.atlascloud.ai/v1",
+    },
 }
 
 // Suggested models per provider for quick add
 export const SUGGESTED_MODELS: Partial<Record<ProviderName, string[]>> = {
     openai: [
-        "gpt-5.2-pro",
-        "gpt-5.2-chat-latest",
-        "gpt-5.2",
-        "gpt-5.1-codex-mini",
-        "gpt-5.1-codex",
-        "gpt-5.1-chat-latest",
-        "gpt-5.1",
-        "gpt-5-pro",
-        "gpt-5",
-        "gpt-5-mini",
-        "gpt-5-nano",
-        "gpt-5-codex",
-        "gpt-5-chat-latest",
+        "gpt-5.5-pro",
+        "gpt-5.5",
+        "gpt-5.4-pro",
+        "gpt-5.4",
+        "gpt-5.4-mini",
+        "gpt-5.4-nano",
+        "gpt-5-codex-mini",
         "gpt-4.1",
         "gpt-4.1-mini",
-        "gpt-4.1-nano",
         "gpt-4o",
         "gpt-4o-mini",
     ],
     anthropic: [
-        // Claude 4.5 series (latest)
-        "claude-opus-4-5-20250514",
-        "claude-sonnet-4-5-20250514",
-        // Claude 4 series
-        "claude-opus-4-20250514",
-        "claude-sonnet-4-20250514",
+        // Claude 4.8 / 4.7 / 4.6 series (latest, dateless pinned IDs)
+        "claude-opus-4-8",
+        "claude-sonnet-4-6",
+        "claude-haiku-4-5",
+        "claude-opus-4-7",
+        "claude-opus-4-6",
+        // Claude 4.5 series
+        "claude-sonnet-4-5-20250929",
+        "claude-opus-4-5-20251101",
         // Claude 3.7 series
         "claude-3-7-sonnet-20250219",
         // Claude 3.5 series
         "claude-3-5-sonnet-20241022",
         "claude-3-5-haiku-20241022",
-        // Claude 3 series
-        "claude-3-opus-20240229",
-        "claude-3-sonnet-20240229",
-        "claude-3-haiku-20240307",
     ],
     google: [
+        // Gemini 3 series
+        "gemini-3.1-pro",
+        "gemini-3.5-flash",
+        "gemini-3-flash",
+        "gemini-3.1-flash-lite",
         // Gemini 2.5 series
         "gemini-2.5-pro",
         "gemini-2.5-flash",
-        "gemini-2.5-flash-preview-05-20",
-        // Gemini 2.0 series
-        "gemini-2.0-flash",
-        "gemini-2.0-flash-exp",
-        "gemini-2.0-flash-lite",
-        // Gemini 1.5 series
-        "gemini-1.5-pro",
-        "gemini-1.5-flash",
-        // Legacy
-        "gemini-pro",
+        "gemini-2.5-flash-lite",
     ],
     vertexai: [
+        // Gemini 3 series
+        "gemini-3.1-pro-preview",
+        "gemini-3.5-flash",
+        "gemini-3-flash-preview",
+        "gemini-3.1-flash-lite",
         // Gemini 2.5 series
         "gemini-2.5-pro",
         "gemini-2.5-flash",
-        // Gemini 2.0 series
-        "gemini-2.0-flash",
-        "gemini-2.0-flash-exp",
-        // Gemini 1.5 series
-        "gemini-1.5-pro",
-        "gemini-1.5-flash",
+        "gemini-2.5-flash-lite",
+    ],
+    azure: [
+        "gpt-5.5",
+        "gpt-5.4",
+        "gpt-5.1",
+        "gpt-5",
+        "gpt-5-mini",
+        "gpt-4.1",
+        "gpt-4o",
+        "gpt-4o-mini",
+        "o3",
+        "o4-mini",
     ],
-    azure: ["gpt-4o", "gpt-4o-mini", "gpt-4-turbo", "gpt-4", "gpt-35-turbo"],
     bedrock: [
         // Anthropic Claude
-        "anthropic.claude-opus-4-5-20250514-v1:0",
-        "anthropic.claude-sonnet-4-5-20250514-v1:0",
+        "anthropic.claude-opus-4-8",
+        "anthropic.claude-opus-4-7",
+        "anthropic.claude-sonnet-4-6",
+        "anthropic.claude-opus-4-6-v1",
+        "anthropic.claude-opus-4-5-20251101-v1:0",
+        "anthropic.claude-sonnet-4-5-20250929-v1:0",
+        "anthropic.claude-haiku-4-5-20251001-v1:0",
+        "anthropic.claude-opus-4-1-20250805-v1:0",
         "anthropic.claude-opus-4-20250514-v1:0",
         "anthropic.claude-sonnet-4-20250514-v1:0",
-        "anthropic.claude-3-7-sonnet-20250219-v1:0",
-        "anthropic.claude-3-5-sonnet-20241022-v2:0",
         "anthropic.claude-3-5-haiku-20241022-v1:0",
-        "anthropic.claude-3-opus-20240229-v1:0",
-        "anthropic.claude-3-sonnet-20240229-v1:0",
-        "anthropic.claude-3-haiku-20240307-v1:0",
         // Amazon Nova
+        "amazon.nova-2-lite-v1:0",
+        "amazon.nova-premier-v1:0",
         "amazon.nova-pro-v1:0",
         "amazon.nova-lite-v1:0",
         "amazon.nova-micro-v1:0",
         // Meta Llama
+        "meta.llama4-maverick-17b-instruct-v1:0",
+        "meta.llama4-scout-17b-instruct-v1:0",
         "meta.llama3-3-70b-instruct-v1:0",
-        "meta.llama3-1-405b-instruct-v1:0",
-        "meta.llama3-1-70b-instruct-v1:0",
         // Mistral
-        "mistral.mistral-large-2411-v1:0",
-        "mistral.mistral-small-2503-v1:0",
+        "mistral.mistral-large-3-675b-instruct",
+        "mistral.pixtral-large-2502-v1:0",
     ],
     openrouter: [
         // Anthropic
-        "anthropic/claude-sonnet-4",
-        "anthropic/claude-opus-4",
-        "anthropic/claude-3.5-sonnet",
-        "anthropic/claude-3.5-haiku",
+        "anthropic/claude-opus-4.8",
+        "anthropic/claude-sonnet-4.6",
+        "anthropic/claude-haiku-4.5",
         // OpenAI
-        "openai/gpt-4o",
+        "openai/gpt-5.5",
+        "openai/gpt-5.4",
+        "openai/gpt-5.4-mini",
         "openai/gpt-4o-mini",
-        "openai/o1",
-        "openai/o3-mini",
         // Google
-        "google/gemini-2.5-pro",
-        "google/gemini-2.5-flash",
-        "google/gemini-2.0-flash-exp:free",
+        "google/gemini-3.1-pro-preview",
+        "google/gemini-3.5-flash",
+        "google/gemini-2.5-flash-lite",
+        // xAI
+        "x-ai/grok-4.3",
         // Meta Llama
+        "meta-llama/llama-4-maverick",
+        "meta-llama/llama-4-scout",
         "meta-llama/llama-3.3-70b-instruct",
-        "meta-llama/llama-3.1-405b-instruct",
-        "meta-llama/llama-3.1-70b-instruct",
         // DeepSeek
-        "deepseek/deepseek-chat",
-        "deepseek/deepseek-r1",
+        "deepseek/deepseek-v4-pro",
+        "deepseek/deepseek-v3.2",
         // Qwen
-        "qwen/qwen-2.5-72b-instruct",
+        "qwen/qwen3.7-max",
+        "qwen/qwen3-coder",
+        // MiniMax
+        "minimax/minimax-m3",
+    ],
+    aihubmix: [
+        // Fallback list. The settings UI loads the live model list from AIHubMix when available.
+        // Anthropic Claude
+        "claude-fable-5",
+        "claude-opus-4-8",
+        "claude-sonnet-4-6",
+        // OpenAI
+        "gpt-5.5",
+        "gpt-5.5-pro",
+        "gpt-5.4",
+        // Google Gemini
+        "gemini-3.5-flash",
+        "gemini-3.1-pro-preview",
+        "gemini-3-flash-preview",
+        // DeepSeek
+        "deepseek-v4-pro",
+        "deepseek-v4-flash",
+        // Qwen
+        "qwen3.7-max",
+        "qwen3-coder-next",
+        // Z.ai
+        "glm-5.1",
+        // Moonshot AI
+        "kimi-k2.6",
+        // MiniMax
+        "minimax-m3",
+        // xAI
+        "grok-4.3",
+        // Baidu
+        "ernie-5.1",
+        // Mistral
+        "mistral-large-3",
+        // Meta
+        "llama-4-maverick",
+    ],
+    deepseek: [
+        "deepseek-v4-pro",
+        "deepseek-v4-flash",
+        "deepseek-chat",
+        "deepseek-reasoner",
     ],
-    deepseek: ["deepseek-chat", "deepseek-reasoner", "deepseek-coder"],
     siliconflow: [
         // DeepSeek
-        "deepseek-ai/DeepSeek-V3",
-        "deepseek-ai/DeepSeek-R1",
-        "deepseek-ai/DeepSeek-V2.5",
+        "deepseek-ai/DeepSeek-V4-Pro",
+        "deepseek-ai/DeepSeek-V4-Flash",
+        "deepseek-ai/DeepSeek-V3.2",
+        // MiniMax
+        "MiniMaxAI/MiniMax-M3",
+        // Moonshot
+        "moonshotai/Kimi-K2.6",
+        // Z.ai
+        "zai-org/GLM-5",
         // Qwen
-        "Qwen/Qwen2.5-72B-Instruct",
-        "Qwen/Qwen2.5-32B-Instruct",
-        "Qwen/Qwen2.5-Coder-32B-Instruct",
-        "Qwen/Qwen2.5-7B-Instruct",
-        "Qwen/Qwen2-VL-72B-Instruct",
-        "qwen3.5-plus",
+        "Qwen/Qwen3.6-35B-A3B",
+        "Qwen/Qwen3-Coder-480B-A35B-Instruct",
+        "Qwen/Qwen3-30B-A3B-Instruct-2507",
+        "Qwen/Qwen3-VL-32B-Instruct",
+        // OpenAI open-weights
+        "openai/gpt-oss-120b",
     ],
     sglang: [
         // SGLang is OpenAI-compatible, models depend on deployment
         "default",
     ],
     gateway: [
-        "openai/gpt-4o",
-        "openai/gpt-4o-mini",
-        "anthropic/claude-sonnet-4-5",
-        "anthropic/claude-3-5-sonnet",
-        "google/gemini-2.0-flash",
+        "openai/gpt-5.5",
+        "anthropic/claude-opus-4.7",
+        "google/gemini-3.1-pro-preview",
+        "xai/grok-4.3",
+        "anthropic/claude-sonnet-4.6",
+        "anthropic/claude-haiku-4.5",
+        "openai/gpt-5.4-mini",
     ],
     edgeone: ["@tx/deepseek-ai/deepseek-v32"],
     doubao: [
-        // ByteDance Doubao models
-        "doubao-1.5-thinking-pro-250415",
-        "doubao-1.5-thinking-pro-m-250428",
-        "doubao-1.5-pro-32k-250115",
-        "doubao-1.5-pro-256k-250115",
-        "doubao-pro-32k-241215",
-        "doubao-pro-256k-241215",
+        // ByteDance Doubao models (Volcengine Ark IDs use dash form)
+        "doubao-seed-2-0-pro-260215",
+        "doubao-seed-2-0-lite-260428",
+        "doubao-seed-2-0-mini-260428",
+        "doubao-seed-1-8-251228",
+        "doubao-seed-1-6-251015",
+        "doubao-seed-1-6-flash-250828",
+        "doubao-seed-1-6-vision-250815",
+        "doubao-1-5-pro-32k-250115",
+        "doubao-1-5-lite-32k-250115",
     ],
     modelscope: [
+        // DeepSeek
+        "deepseek-ai/DeepSeek-V4-Pro",
+        "deepseek-ai/DeepSeek-V3.2",
+        "deepseek-ai/DeepSeek-R1-0528",
+        "deepseek-ai/DeepSeek-R1",
         // Qwen
-        "Qwen/Qwen2.5-72B-Instruct",
-        "Qwen/Qwen2.5-32B-Instruct",
         "Qwen/Qwen3-235B-A22B-Instruct-2507",
         "Qwen/Qwen3-VL-235B-A22B-Instruct",
+        "Qwen/Qwen3-Coder-30B-A3B-Instruct",
         "Qwen/Qwen3-32B",
-        "qwen3.5-plus",
-        // DeepSeek
-        "deepseek-ai/DeepSeek-R1-0528",
-        "deepseek-ai/DeepSeek-V3.2",
+        "Qwen/Qwen2.5-72B-Instruct",
     ],
     minimax: [
         // MiniMax models (Anthropic-compatible API)
+        "MiniMax-M3",
         "MiniMax-M2.7",
         "MiniMax-M2.7-highspeed",
         "MiniMax-M2.5",
-        "MiniMax-M2.5-highspeed",
     ],
     novita: [
         // Novita AI models (OpenAI-compatible API)
-        "moonshotai/kimi-k2.5",
-        "zai-org/glm-5",
-        "minimax/minimax-m2.5",
+        "minimax/minimax-m3",
+        "deepseek/deepseek-v4-pro",
+        "zai-org/glm-5.1",
+        "moonshotai/kimi-k2.6",
+        "deepseek/deepseek-v4-flash",
     ],
+    mimo: ["mimo-v2.5-pro", "mimo-v2.5"],
+    atlascloud: ["qwen/qwen3.5-flash", "deepseek-ai/deepseek-v4-pro"],
 }
 
 // Helper to generate UUID

package.json

@@ -1,6 +1,6 @@
 {
     "name": "next-ai-draw-io",
-    "version": "0.4.15",
+    "version": "0.4.16",
     "license": "Apache-2.0",
     "private": true,
     "main": "dist-electron/main/index.js",
@@ -40,6 +40,7 @@
         "@ai-sdk/google-vertex": "^4.0.16",
         "@ai-sdk/openai": "^3.0.0",
         "@ai-sdk/react": "^3.0.1",
+        "@aihubmix/ai-sdk-provider": "^2.1.0",
         "@aws-sdk/client-dynamodb": "^3.957.0",
         "@aws-sdk/credential-providers": "^3.943.0",
         "@extractus/article-extractor": "^8.0.18",
@@ -49,9 +50,9 @@
         "@langfuse/tracing": "^4.4.9",
         "@next/third-parties": "^16.0.6",
         "@opennextjs/cloudflare": "^1.17.1",
-        "@openrouter/ai-sdk-provider": "^1.5.4",
+        "@openrouter/ai-sdk-provider": "^2.0.0",
         "@opentelemetry/api": "^1.9.0",
-        "@opentelemetry/exporter-trace-otlp-http": "^0.214.0",
+        "@opentelemetry/exporter-trace-otlp-http": "^0.221.0",
         "@opentelemetry/sdk-trace-node": "^2.2.0",
         "@radix-ui/react-alert-dialog": "^1.1.15",
         "@radix-ui/react-collapsible": "^1.1.12",
@@ -77,7 +78,7 @@
         "nanoid": "^5.0.0",
         "negotiator": "^1.0.0",
         "next": "^16.0.7",
-        "ollama-ai-provider-v2": "^2.0.0",
+        "ollama-ai-provider-v2": "^3.0.0",
         "pako": "^2.1.0",
         "prism-react-renderer": "^2.4.1",
         "react": "^19.1.2",
@@ -108,7 +109,7 @@
     },
     "devDependencies": {
         "@anthropic-ai/tokenizer": "^0.0.4",
-        "@biomejs/biome": "2.4.10",
+        "@biomejs/biome": "2.5.11",
         "@playwright/test": "^1.57.0",
         "@tailwindcss/postcss": "^4",
         "@tailwindcss/typography": "^0.5.19",
@@ -127,8 +128,8 @@
         "cross-env": "^10.1.0",
         "electron": "^39.2.7",
         "electron-builder": "^26.0.12",
-        "esbuild": "^0.27.2",
-        "eslint": "9.39.4",
+        "esbuild": "^0.28.0",
+        "eslint": "9.39.5",
         "eslint-config-next": "16.1.6",
         "husky": "^9.1.7",
         "jsdom": "^27.4.0",

packages/mcp-server/README.md

@@ -116,9 +116,14 @@ Use the standard MCP configuration with:
 |------|-------------|
 | `start_session` | Opens browser with real-time diagram preview |
 | `create_new_diagram` | Create a new diagram from XML (requires `xml` argument) |
+| `load_diagram` | Load a `.drawio` file from disk into the session (handles compressed files) |
 | `edit_diagram` | Edit diagram by ID-based operations (update/add/delete cells) |
 | `get_diagram` | Get the current diagram XML |
-| `export_diagram` | Save diagram to a `.drawio` file |
+| `export_diagram` | Save diagram to a `.drawio`, `.png`, or `.svg` file |
+| `list_pages` | List every page (tab) with id, name, index, and cell count |
+| `add_page` | Append a new page without touching existing ones |
+| `rename_page` | Rename a page |
+| `delete_page` | Delete a page (refuses to delete the last one) |
 
 ## How It Works
 

packages/mcp-server/package.json

@@ -1,6 +1,6 @@
 {
     "name": "@next-ai-drawio/mcp-server",
-    "version": "0.2.0",
+    "version": "0.2.3",
     "description": "MCP server for Next AI Draw.io - AI-powered diagram generation with real-time browser preview",
     "type": "module",
     "main": "dist/index.js",
@@ -11,6 +11,8 @@
         "build": "tsc",
         "dev": "tsx watch src/index.ts",
         "start": "node dist/index.js",
+        "test": "vitest run",
+        "test:watch": "vitest",
         "prepublishOnly": "npm run build"
     },
     "keywords": [
@@ -44,7 +46,8 @@
     "devDependencies": {
         "@types/node": "^24.0.0",
         "tsx": "^4.19.0",
-        "typescript": "^5"
+        "typescript": "^5",
+        "vitest": "^4.1.8"
     },
     "engines": {
         "node": ">=18"

packages/mcp-server/src/diagram-operations.ts

@@ -1,8 +1,14 @@
 /**
  * ID-based diagram operations
- * Copied from lib/utils.ts to avoid cross-package imports
+ *
+ * The xmlContent argument may be either a bare <mxGraphModel> (legacy) or a
+ * full <mxfile> with one or more <diagram> pages. For mxfile inputs, an
+ * optional pageSelector identifies which page to edit; when omitted, the
+ * first page is targeted (the "active page by convention" — see pages.ts).
  */
 
+import { findPageElement, hasPageSelector, type PageSelector } from "./pages.js"
+
 export interface DiagramOperation {
     operation: "update" | "add" | "delete"
     cell_id: string
@@ -22,15 +28,18 @@ export interface ApplyOperationsResult {
 
 /**
  * Apply diagram operations (update/add/delete) using ID-based lookup.
- * This replaces the text-matching approach with direct DOM manipulation.
  *
- * @param xmlContent - The full mxfile XML content
- * @param operations - Array of operations to apply
- * @returns Object with result XML and any errors
+ * @param xmlContent - The diagram XML. May be either a bare <mxGraphModel> or
+ *                     a full <mxfile> with one or more <diagram> children.
+ * @param operations - Array of operations to apply.
+ * @param pageSelector - Optional page selector for multi-page docs. Defaults
+ *                       to the first page.
+ * @returns Object with result XML (same shape as input) and any per-op errors.
  */
 export function applyDiagramOperations(
     xmlContent: string,
     operations: DiagramOperation[],
+    pageSelector?: PageSelector,
 ): ApplyOperationsResult {
     const errors: OperationError[] = []
 
@@ -53,22 +62,75 @@ export function applyDiagramOperations(
         }
     }
 
-    // Find the root element (inside mxGraphModel)
-    const root = doc.querySelector("root")
-    if (!root) {
-        return {
-            result: xmlContent,
-            errors: [
-                {
-                    type: "update",
-                    cellId: "",
-                    message: "Could not find <root> element in XML",
-                },
-            ],
+    // Locate the <root> element to operate on.
+    //
+    // - For <mxfile> input: resolve the page via pageSelector, then dive into
+    //   its <root>. This scopes querySelectorAll calls below to one page so
+    //   cells on other pages aren't accidentally matched.
+    // - For bare <mxGraphModel> input: use the document's only <root>.
+    let root: Element | null
+    if (doc.documentElement?.tagName === "mxfile") {
+        const found = findPageElement(doc as unknown as Document, pageSelector)
+        if (!found) {
+            const selDesc = hasPageSelector(pageSelector)
+                ? ` matching selector ${JSON.stringify(pageSelector)}`
+                : ""
+            return {
+                result: xmlContent,
+                errors: [
+                    {
+                        type: "update",
+                        cellId: "",
+                        message: `Page${selDesc} not found in <mxfile>`,
+                    },
+                ],
+            }
+        }
+        root = found.element.querySelector("root")
+        if (!root) {
+            const pageId =
+                found.element.getAttribute("id") || `(index ${found.index})`
+            return {
+                result: xmlContent,
+                errors: [
+                    {
+                        type: "update",
+                        cellId: "",
+                        message: `Page "${pageId}" has no <root> element`,
+                    },
+                ],
+            }
+        }
+    } else {
+        if (hasPageSelector(pageSelector)) {
+            return {
+                result: xmlContent,
+                errors: [
+                    {
+                        type: "update",
+                        cellId: "",
+                        message:
+                            "Page selector provided but document is not multi-page (no <mxfile> wrapper). Use create_new_diagram with a full <mxfile> first, or omit the page selector.",
+                    },
+                ],
+            }
+        }
+        root = doc.querySelector("root")
+        if (!root) {
+            return {
+                result: xmlContent,
+                errors: [
+                    {
+                        type: "update",
+                        cellId: "",
+                        message: "Could not find <root> element in XML",
+                    },
+                ],
+            }
         }
     }
 
-    // Build a map of cell IDs to elements
+    // Build a map of cell IDs to elements (scoped to the resolved page).
     const cellMap = new Map<string, Element>()
     root.querySelectorAll("mxCell").forEach((cell) => {
         const id = cell.getAttribute("id")
@@ -208,7 +270,9 @@ export function applyDiagramOperations(
                 cellsToDelete.add(cellId)
 
                 // Find children (cells where parent === cellId)
-                const children = root.querySelectorAll(
+                // Scoped to `root` so other pages' cells with the same parent id
+                // (notably "1") are never touched.
+                const children = root!.querySelectorAll(
                     `mxCell[parent="${cellId}"]`,
                 )
                 children.forEach((child) => {

packages/mcp-server/src/edit-gate.ts

@@ -0,0 +1,102 @@
+/**
+ * Workflow gate for edit_diagram.
+ *
+ * Instead of a wall-clock timeout (the old 30s rule rejected slow-but-correct
+ * clients, see #885), we compare content: `lastSeenXml` is the state-store
+ * XML the model last saw (get_diagram) or wrote itself (create_new_diagram /
+ * edit_diagram / page CRUD). The store only changes on server writes or
+ * browser pushes (user autosave, sync exports), so if the live store still
+ * matches `lastSeenXml`, nothing happened that the model hasn't seen — the
+ * edit is safe no matter how much time passed.
+ *
+ * "Matches" is structural, not byte-for-byte: draw.io re-serialises the
+ * document when it pushes state back (different attribute order, pretty-
+ * printed whitespace, regenerated diagram ids, viewport attributes like
+ * dx/dy/pageWidth on <mxGraphModel>, a different mxfile host). None of that
+ * is a user edit, so the fingerprint keeps only what a user can actually
+ * change: the set of pages, each page's name, and each page's cell tree
+ * (tags + sorted attributes + text). Byte equality is kept as a fast path.
+ */
+import { isMxGraphModel, normalizeToMxfile, parseMxfile } from "./pages.js"
+
+export type EditGateResult =
+    | { ok: true }
+    | { ok: false; reason: "no-context" | "stale" }
+
+/**
+ * Canonical serialisation of an element subtree: tag + attributes sorted by
+ * name + child elements in order + non-whitespace text. Whitespace-only text
+ * nodes (pretty-printing) are dropped.
+ */
+function canonicalizeElement(el: Element): string {
+    const attrs = Array.from(el.attributes)
+        .map((a) => `${a.name}=${JSON.stringify(a.value)}`)
+        .sort()
+        .join(" ")
+    let children = ""
+    for (const child of Array.from(el.childNodes)) {
+        if (child.nodeType === 1) {
+            children += canonicalizeElement(child as Element)
+        } else if (child.nodeType === 3 || child.nodeType === 4) {
+            const text = (child.textContent ?? "").trim()
+            if (text) children += JSON.stringify(text)
+        }
+    }
+    return `<${el.tagName} ${attrs}>${children}</${el.tagName}>`
+}
+
+/**
+ * Structural fingerprint of a diagram document: page names + each page's
+ * <root> subtree, ignoring everything draw.io rewrites on re-serialisation
+ * (mxfile/mxGraphModel attributes, diagram ids, formatting). A bare
+ * <mxGraphModel> fingerprints identically to its single-page mxfile wrapping.
+ * Unparseable input falls back to the trimmed raw string, degrading to the
+ * plain string comparison.
+ *
+ * `includeNames=false` drops page names from the fingerprint — used when the
+ * other side of a comparison is a bare <mxGraphModel>, which carries no page
+ * name at all (normalizeToMxfile would invent "Page-1", falsely mismatching
+ * any real page name).
+ */
+export function contentFingerprint(xml: string, includeNames = true): string {
+    const normalized = normalizeToMxfile(xml)
+    const doc = normalized ? parseMxfile(normalized) : null
+    if (!doc) return xml.trim()
+    const pages: string[] = []
+    doc.querySelectorAll("diagram").forEach((d) => {
+        const name = includeNames ? d.getAttribute("name") || "" : ""
+        const root = d.querySelector("root")
+        // No <root> means the page content is not plain XML (e.g. draw.io's
+        // compressed format) — fingerprint the raw text instead.
+        const body = root
+            ? canonicalizeElement(root)
+            : (d.textContent || "").trim()
+        pages.push(`${name}=${body}`)
+    })
+    return pages.join("\n")
+}
+
+export function checkEditGate(
+    lastSeenXml: string,
+    liveXml: string,
+): EditGateResult {
+    // Model never fetched or produced any diagram state in this session.
+    if (!lastSeenXml) return { ok: false, reason: "no-context" }
+    // Browser state moved since the model last looked (e.g. manual user
+    // edits): force a re-fetch so update/delete operations don't build on
+    // stale cell contents. An empty liveXml means the store has no entry to
+    // compare against, so there is nothing newer to have missed.
+    if (liveXml && liveXml !== lastSeenXml) {
+        // A bare <mxGraphModel> on either side carries no page name, so
+        // comparing names would mismatch against anything not called
+        // "Page-1". Compare cell trees only in that case.
+        const includeNames =
+            !isMxGraphModel(liveXml) && !isMxGraphModel(lastSeenXml)
+        if (
+            contentFingerprint(liveXml, includeNames) !==
+            contentFingerprint(lastSeenXml, includeNames)
+        )
+            return { ok: false, reason: "stale" }
+    }
+    return { ok: true }
+}

packages/mcp-server/src/http-server.ts

@@ -93,6 +93,7 @@ interface SessionState {
     svg?: string // Cached SVG from last browser save
     syncRequested?: number // Timestamp when sync requested, cleared when browser responds
     exportFormat?: "png" | "svg" // Set by MCP tool to request browser export
+    exportXml?: string // Single-page projection to load before a page-targeted export
     exportData?: string // Base64/SVG data returned by browser after export
 }
 
@@ -117,12 +118,37 @@ export function setState(sessionId: string, xml: string, svg?: string): number {
         svg: svg || existing?.svg, // Preserve cached SVG if not provided
         syncRequested: undefined, // Clear sync request when browser pushes state
         exportFormat: existing?.exportFormat, // Preserve pending export request
+        exportXml: existing?.exportXml, // Preserve pending projection
         exportData: existing?.exportData, // Preserve export result
     })
     log.debug(`State updated: session=${sessionId}, version=${newVersion}`)
     return newVersion
 }
 
+/**
+ * Ask the browser bridge to export the current diagram as png/svg.
+ *
+ * When `projectionXml` is given (a single-page <mxfile>), the bridge loads it
+ * first, waits for draw.io's own load event, exports, then reloads the
+ * session's real document — so a page-targeted export never mutates the
+ * canonical session state and needs no fixed-delay guessing on the server.
+ *
+ * Returns false when the session is unknown. Callers should then poll
+ * `getState(sessionId)?.exportData` for the result.
+ */
+export function requestExport(
+    sessionId: string,
+    format: "png" | "svg",
+    projectionXml?: string,
+): boolean {
+    const state = stateStore.get(sessionId)
+    if (!state) return false
+    state.exportData = undefined
+    state.exportXml = projectionXml
+    state.exportFormat = format
+    return true
+}
+
 export function requestSync(sessionId: string): boolean {
     const state = stateStore.get(sessionId)
     if (state) {
@@ -286,6 +312,7 @@ function handleStateApi(
                 version: state?.version || 0,
                 syncRequested: !!state?.syncRequested,
                 exportFormat: state?.exportFormat || null,
+                exportXml: state?.exportXml || null,
             }),
         )
     } else if (req.method === "POST") {
@@ -305,6 +332,7 @@ function handleStateApi(
                     if (state) {
                         state.exportData = data.exportData
                         state.exportFormat = undefined
+                        state.exportXml = undefined
                         log.debug(
                             `Export data received for session=${sessionId}`,
                         )
@@ -675,6 +703,8 @@ function getHtmlPage(sessionId: string): string {
         let pendingSvgExport = null;
         let pendingAiSvg = false;
         let pendingMcpExport = null; // 'png' or 'svg' when MCP requested export
+        let projectionExportActive = false; // page-targeted export: showing a transient single-page projection
+        let projectionRestoreXml = null; // the real document to reload once a projection export finishes
 
         window.addEventListener('message', (e) => {
             if (e.origin !== '${DRAWIO_ORIGIN}') return;
@@ -684,6 +714,10 @@ function getHtmlPage(sessionId: string): string {
                     isReady = true;
                     if (pendingXml) { loadDiagram(pendingXml); pendingXml = null; }
                 } else if ((msg.event === 'save' || msg.event === 'autosave') && msg.xml && msg.xml !== lastXml) {
+                    // Ignore autosave while a single-page projection is on screen
+                    // for a page-targeted export — otherwise we'd push the
+                    // transient projection back as the canonical session state.
+                    if (projectionExportActive) return;
                     // Request SVG export, then push state with SVG
                     pendingSvgExport = msg.xml;
                     iframe.contentWindow.postMessage(JSON.stringify({ action: 'export', format: 'svg' }), '*');
@@ -704,6 +738,9 @@ function getHtmlPage(sessionId: string): string {
                                 headers: { 'Content-Type': 'application/json' },
                                 body: JSON.stringify({ sessionId, exportData: d })
                             }).catch(() => {});
+                            // Page-targeted export: restore the user's real
+                            // multi-page document now that we have the image.
+                            restoreFromProjection();
                             return;
                         }
                     }
@@ -761,6 +798,22 @@ function getHtmlPage(sessionId: string): string {
             }
         }
 
+        // Restore the user's real document after a page-targeted projection
+        // export. If we never captured one (lastXml was null at projection
+        // start), fall back to forcing a reload from the server on the next
+        // poll by rewinding currentVersion — never leave the iframe stuck on
+        // the transient projection.
+        function restoreFromProjection() {
+            if (!projectionExportActive) return;
+            projectionExportActive = false;
+            if (projectionRestoreXml) {
+                iframe.contentWindow.postMessage(JSON.stringify({ action: 'load', xml: projectionRestoreXml, autosave: 1 }), '*');
+                projectionRestoreXml = null;
+            } else {
+                currentVersion = -1; // force the next poll to reload from server
+            }
+        }
+
         async function pushState(xml, svg = '') {
             if (!sessionId) return;
             try {
@@ -786,20 +839,54 @@ function getHtmlPage(sessionId: string): string {
                     pendingSyncExport = true;
                     iframe.contentWindow.postMessage(JSON.stringify({ action: 'export', format: 'xml' }), '*');
                 }
-                // Load new diagram from server (before export, so we export latest)
-                if (s.version > currentVersion && s.xml) {
+                // Load new diagram from server (before export, so we export latest).
+                // While a page-targeted projection is on screen, skip the reload
+                // so it doesn't fight the projection — and leave currentVersion
+                // unadvanced so this bump is re-detected and applied once the
+                // real document is restored.
+                if (s.version > currentVersion && s.xml && !projectionExportActive) {
                     currentVersion = s.version;
                     loadDiagram(s.xml, true);
                 }
-                // Handle export request from MCP server (png/svg) - after version update
+                // Handle export request from MCP server (png/svg).
+                //
+                // Plain export: capture whatever tab is currently displayed.
+                //
+                // Page-targeted export: the server sends a single-page <mxfile>
+                // projection in s.exportXml. We load it into the iframe, let
+                // draw.io render it, export, then reload the user's real
+                // document — all browser-side. The canonical session state is
+                // never mutated, so there is no server-side restore race and no
+                // dependence on poll timing. autosave is suppressed while the
+                // projection is showing (see projectionExportActive guard).
                 if (s.exportFormat && !pendingMcpExport && isReady) {
                     pendingMcpExport = s.exportFormat;
-                    const exportOpts = s.exportFormat === 'png'
-                        ? { action: 'export', format: 'png', scale: 2 }
-                        : { action: 'export', format: 'svg' };
-                    iframe.contentWindow.postMessage(JSON.stringify(exportOpts), '*');
-                    // Timeout: reset if draw.io never responds
-                    setTimeout(() => { if (pendingMcpExport) { pendingMcpExport = null; } }, 8000);
+                    const fireExport = () => {
+                        const exportOpts = pendingMcpExport === 'png'
+                            ? { action: 'export', format: 'png', scale: 2 }
+                            : { action: 'export', format: 'svg' };
+                        iframe.contentWindow.postMessage(JSON.stringify(exportOpts), '*');
+                    };
+                    if (s.exportXml) {
+                        // Stash the real document so we can restore after export.
+                        projectionRestoreXml = lastXml;
+                        projectionExportActive = true;
+                        // Load the projection without touching lastXml/server state.
+                        iframe.contentWindow.postMessage(JSON.stringify({ action: 'load', xml: s.exportXml, autosave: 0 }), '*');
+                        // Let draw.io render the loaded page before exporting
+                        // (same proven settle delay as the AI-preview path).
+                        setTimeout(fireExport, 600);
+                    } else {
+                        fireExport();
+                    }
+                    // Timeout: reset if draw.io never responds, and restore the
+                    // real document if a projection was left showing.
+                    setTimeout(() => {
+                        if (pendingMcpExport) {
+                            pendingMcpExport = null;
+                            restoreFromProjection();
+                        }
+                    }, 10000);
                 }
             } catch {}
         }
@@ -839,7 +926,11 @@ function getHtmlPage(sessionId: string): string {
             saveConfirmBtn.textContent = 'Exporting...';
 
             if (format === 'drawio') {
-                // Use lastXml directly instead of requesting export (avoids race with SVG exports)
+                // Use lastXml directly instead of requesting export (avoids race with SVG exports).
+                // session.xml is canonically <mxfile> after the multi-page refactor,
+                // so no wrapper injection is needed. The legacy fallback below
+                // remains only for documents that somehow slipped past
+                // normalisation (e.g. an older session loaded from external state).
                 let xmlData = lastXml || '';
                 if (xmlData && !xmlData.includes('<mxfile')) {
                     xmlData = '<mxfile host="mcp"><diagram name="Page-1">' + xmlData + '</diagram></mxfile>';

packages/mcp-server/src/load-diagram.ts

@@ -0,0 +1,101 @@
+/**
+ * File-loading helpers for the load_diagram tool.
+ *
+ * A .drawio file is an <mxfile> whose <diagram> children hold each page's
+ * <mxGraphModel> either as plain XML or — draw.io's default save format —
+ * compressed: encodeURIComponent(xml) → raw deflate → base64 as the
+ * diagram's text content. The rest of the server assumes plain XML inside
+ * every <diagram>, so loading decompresses all pages up front.
+ */
+import { inflateRawSync } from "node:zlib"
+import { DOMParser } from "linkedom"
+import {
+    isMxFile,
+    isMxGraphModel,
+    normalizeToMxfile,
+    parseMxfile,
+    serializeMxfile,
+} from "./pages.js"
+
+export type LoadResult =
+    | { ok: true; xml: string }
+    | { ok: false; error: string }
+
+/**
+ * Decode one compressed page body (base64 → raw deflate → URI-decode).
+ * Returns null if the text isn't in that format.
+ */
+export function decompressPageContent(compressed: string): string | null {
+    try {
+        const inflated = inflateRawSync(
+            Buffer.from(compressed.trim(), "base64"),
+        ).toString("utf-8")
+        try {
+            return decodeURIComponent(inflated)
+        } catch {
+            // Not URI-encoded (older files) — the inflated text is the XML.
+            return inflated
+        }
+    } catch {
+        return null
+    }
+}
+
+/**
+ * Parse the content of a .drawio file into the canonical session shape:
+ * an <mxfile> whose every page holds plain <mxGraphModel> XML. Accepts a
+ * bare <mxGraphModel> (wrapped into a one-page mxfile) and decompresses
+ * any compressed pages.
+ */
+export function parseDrawioFileContent(content: string): LoadResult {
+    const trimmed = content.trim()
+    if (!trimmed) return { ok: false, error: "File is empty." }
+
+    if (isMxGraphModel(trimmed)) {
+        const normalized = normalizeToMxfile(trimmed)
+        return normalized
+            ? { ok: true, xml: normalized }
+            : { ok: false, error: "Failed to parse <mxGraphModel> XML." }
+    }
+    if (!isMxFile(trimmed)) {
+        return {
+            ok: false,
+            error: "Not a draw.io file: expected an <mxfile> or <mxGraphModel> root element.",
+        }
+    }
+    const doc = parseMxfile(trimmed)
+    if (!doc) return { ok: false, error: "Failed to parse <mxfile> XML." }
+
+    let decompressedAny = false
+    for (const d of Array.from(doc.querySelectorAll("diagram"))) {
+        if (d.querySelector("mxGraphModel")) continue
+        const text = (d.textContent || "").trim()
+        if (!text) continue // an empty page is valid
+        const pageLabel =
+            d.getAttribute("name") || d.getAttribute("id") || "unnamed"
+        const xml = decompressPageContent(text)
+        if (!xml || !isMxGraphModel(xml)) {
+            return {
+                ok: false,
+                error: `Page "${pageLabel}" has content that is neither plain <mxGraphModel> XML nor draw.io's compressed format.`,
+            }
+        }
+        const inner = new DOMParser().parseFromString(xml, "text/xml")
+        if (
+            inner.querySelector("parsererror") ||
+            inner.documentElement?.tagName !== "mxGraphModel"
+        ) {
+            return {
+                ok: false,
+                error: `Page "${pageLabel}" decompressed but its XML failed to parse.`,
+            }
+        }
+        d.textContent = ""
+        d.appendChild(
+            doc.importNode(inner.documentElement as unknown as Node, true),
+        )
+        decompressedAny = true
+    }
+    // Nothing changed — keep the file's own serialisation.
+    return { ok: true, xml: decompressedAny ? serializeMxfile(doc) : trimmed }
+}

packages/mcp-server/src/pages.ts

@@ -0,0 +1,316 @@
+/**
+ * Multi-page (mxfile) helpers for draw.io diagrams.
+ *
+ * The on-disk and embed-protocol shape of a draw.io document is:
+ *
+ *   <mxfile host="...">
+ *     <diagram id="..." name="...">
+ *       <mxGraphModel><root><mxCell .../>...</root></mxGraphModel>
+ *     </diagram>
+ *     ...one or more <diagram> children...
+ *   </mxfile>
+ *
+ * This module centralises page CRUD so that index.ts, xml-validation.ts,
+ * and diagram-operations.ts can all agree on:
+ *   - what "the canonical in-memory shape" is (always mxfile),
+ *   - how to find a page (id, name, or index),
+ *   - how to add/rename/delete pages without re-parsing ad-hoc.
+ */
+
+import { DOMParser } from "linkedom"
+
+export interface PageInfo {
+    id: string
+    name: string
+    index: number
+    cellCount: number
+}
+
+/** Selector used by all multi-page-aware tools. All fields optional. */
+export interface PageSelector {
+    page_id?: string
+    page_name?: string
+    page_index?: number
+}
+
+/** True if the selector targets a specific page (any field set). */
+export function hasPageSelector(s?: PageSelector | null): boolean {
+    if (!s) return false
+    return (
+        Boolean(s.page_id) || Boolean(s.page_name) || s.page_index !== undefined
+    )
+}
+
+/**
+ * Generate a short page id similar in shape to drawio's auto-assigned ids.
+ * Format: 12 chars alphanumeric with a single dash. Not a UUID — drawio itself
+ * uses short ids; collisions are still astronomically unlikely for one session.
+ */
+export function generatePageId(): string {
+    const a = Math.random().toString(36).substring(2, 10)
+    const b = Math.random().toString(36).substring(2, 6)
+    return `${a}-${b}`
+}
+
+/** Cheap regex check — does the XML start with an <mxfile> root? */
+export function isMxFile(xml: string): boolean {
+    return /^\s*(<\?xml[^>]*\?>\s*)?<mxfile[\s>]/i.test(xml)
+}
+
+/** Cheap regex check — does the XML start with a bare <mxGraphModel>? */
+export function isMxGraphModel(xml: string): boolean {
+    return /^\s*(<\?xml[^>]*\?>\s*)?<mxGraphModel[\s>]/i.test(xml)
+}
+
+function escapeAttr(s: string): string {
+    return s
+        .replace(/&/g, "&amp;")
+        .replace(/</g, "&lt;")
+        .replace(/>/g, "&gt;")
+        .replace(/"/g, "&quot;")
+}
+
+/**
+ * Strip a leading <?xml ... ?> declaration from an XML string. The XML spec
+ * only permits the declaration at the very start of a document, so embedding
+ * a declaration inside another element produces invalid XML. Callers must
+ * strip before splicing a fragment into a wrapper.
+ */
+function stripXmlDeclaration(xml: string): string {
+    return xml.replace(/^\s*<\?xml[^>]*\?>\s*/i, "")
+}
+
+/**
+ * Wrap a bare <mxGraphModel> XML string in <mxfile><diagram>...</diagram></mxfile>.
+ * If the input is already an mxfile, returns it unchanged.
+ * If the input is neither shape, returns null so the caller can surface a clear error.
+ *
+ * Strips any leading <?xml ?> declaration before embedding — a declaration is
+ * only valid at the very start of a document, never inside a <diagram>.
+ */
+export function normalizeToMxfile(
+    xml: string,
+    opts: { pageId?: string; pageName?: string; host?: string } = {},
+): string | null {
+    const trimmed = xml.trim()
+    if (!trimmed) return null
+    if (isMxFile(trimmed)) return trimmed
+    if (!isMxGraphModel(trimmed)) return null
+
+    const pageId = opts.pageId || generatePageId()
+    const pageName = opts.pageName || "Page-1"
+    const host = opts.host || "app.diagrams.net"
+    const inner = stripXmlDeclaration(trimmed)
+    return `<mxfile host="${escapeAttr(host)}"><diagram id="${escapeAttr(pageId)}" name="${escapeAttr(pageName)}">${inner}</diagram></mxfile>`
+}
+
+/**
+ * Parse an mxfile XML string. Returns null on parse error or if the root
+ * isn't <mxfile> — callers are expected to have run normalizeToMxfile first.
+ */
+export function parseMxfile(xml: string): Document | null {
+    try {
+        const doc = new DOMParser().parseFromString(xml, "text/xml")
+        if (doc.querySelector("parsererror")) return null
+        if (doc.documentElement?.tagName !== "mxfile") return null
+        return doc as unknown as Document
+    } catch {
+        return null
+    }
+}
+
+/** Serialise an mxfile doc back to a string via the global XMLSerializer polyfill. */
+export function serializeMxfile(doc: Document): string {
+    const serializer = new XMLSerializer()
+    return serializer.serializeToString(doc)
+}
+
+export type PageProjection =
+    | { ok: true; xml: string; index: number; name: string }
+    | { ok: false; reason: "parse" | "notfound" }
+
+/**
+ * Project a single page out of an mxfile string into a standalone one-page
+ * <mxfile>. Used by get_diagram and export_diagram so the three call sites
+ * share one parse → find → serialise path.
+ *
+ * Returns { ok:false, reason:"parse" } if the xml isn't a parseable mxfile,
+ * or { ok:false, reason:"notfound" } if the selector matches no page.
+ */
+export function projectPage(
+    xml: string,
+    selector: PageSelector,
+): PageProjection {
+    const doc = parseMxfile(xml)
+    if (!doc) return { ok: false, reason: "parse" }
+    const found = findPageElement(doc, selector)
+    if (!found) return { ok: false, reason: "notfound" }
+    const serializer = new XMLSerializer()
+    return {
+        ok: true,
+        xml: `<mxfile host="app.diagrams.net">${serializer.serializeToString(found.element)}</mxfile>`,
+        index: found.index,
+        name: found.element.getAttribute("name") || "",
+    }
+}
+
+/** Walk every <diagram> child of <mxfile> and return summary info. */
+export function listPagesFromDoc(doc: Document): PageInfo[] {
+    const diagrams = doc.querySelectorAll("diagram")
+    const result: PageInfo[] = []
+    diagrams.forEach((d, idx) => {
+        const root = d.querySelector("root")
+        const cellCount = root ? root.querySelectorAll("mxCell").length : 0
+        result.push({
+            id: d.getAttribute("id") || "",
+            name: d.getAttribute("name") || `Page-${idx + 1}`,
+            index: idx,
+            cellCount,
+        })
+    })
+    return result
+}
+
+/**
+ * Resolve a page selector to its <diagram> element.
+ * Resolution order: page_id → page_name → page_index → default (first page).
+ *
+ * When no selector field is set we return the first page — the "active page
+ * by convention" mentioned in §3.4 of the design doc.
+ */
+export function findPageElement(
+    doc: Document,
+    selector?: PageSelector,
+): { element: Element; index: number } | null {
+    const diagrams = Array.from(doc.querySelectorAll("diagram"))
+    if (diagrams.length === 0) return null
+
+    if (!hasPageSelector(selector)) {
+        return { element: diagrams[0], index: 0 }
+    }
+
+    if (selector?.page_id) {
+        for (let i = 0; i < diagrams.length; i++) {
+            if (diagrams[i].getAttribute("id") === selector.page_id) {
+                return { element: diagrams[i], index: i }
+            }
+        }
+        return null
+    }
+    if (selector?.page_name) {
+        for (let i = 0; i < diagrams.length; i++) {
+            if (diagrams[i].getAttribute("name") === selector.page_name) {
+                return { element: diagrams[i], index: i }
+            }
+        }
+        return null
+    }
+    if (selector && selector.page_index !== undefined) {
+        const idx = selector.page_index
+        if (Number.isInteger(idx) && idx >= 0 && idx < diagrams.length) {
+            return { element: diagrams[idx], index: idx }
+        }
+        return null
+    }
+
+    return null
+}
+
+/**
+ * Append a new <diagram> to the mxfile doc. The new page's model defaults to
+ * an empty <mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/></root></mxGraphModel>.
+ *
+ * `opts.xml` must be a BARE <mxGraphModel> — passing a full <mxfile> would
+ * end up nested inside <diagram>, which is malformed. We reject the mxfile
+ * shape explicitly and strip any <?xml ?> declaration (only valid at
+ * document start, never inside <diagram>).
+ *
+ * Returns the new PageInfo. Throws if the requested id collides or the xml
+ * shape is wrong.
+ */
+export function addPageToDoc(
+    doc: Document,
+    opts: { id?: string; name?: string; xml?: string } = {},
+): PageInfo {
+    const existing = listPagesFromDoc(doc)
+    const id = opts.id || generatePageId()
+    if (existing.some((p) => p.id === id)) {
+        throw new Error(`Page id "${id}" already exists`)
+    }
+    const name = opts.name || `Page-${existing.length + 1}`
+
+    let inner: string
+    if (opts.xml?.trim()) {
+        const trimmed = stripXmlDeclaration(opts.xml.trim())
+        if (isMxFile(trimmed)) {
+            throw new Error(
+                "addPageToDoc: opts.xml must be a bare <mxGraphModel>; received a full <mxfile>. Extract the target diagram's <mxGraphModel> first.",
+            )
+        }
+        if (!isMxGraphModel(trimmed)) {
+            throw new Error(
+                "addPageToDoc: opts.xml must be a bare <mxGraphModel>.",
+            )
+        }
+        inner = trimmed
+    } else {
+        inner = `<mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/></root></mxGraphModel>`
+    }
+
+    const snippet = `<wrapper><diagram id="${escapeAttr(id)}" name="${escapeAttr(name)}">${inner}</diagram></wrapper>`
+    const tempDoc = new DOMParser().parseFromString(snippet, "text/xml")
+    if (tempDoc.querySelector("parsererror")) {
+        throw new Error(
+            "Failed to parse new page xml — make sure it is a valid <mxGraphModel>",
+        )
+    }
+    const newDiagram = tempDoc.querySelector("diagram")
+    if (!newDiagram) {
+        throw new Error("Failed to construct <diagram> element for new page")
+    }
+
+    const imported = doc.importNode(newDiagram, true) as Element
+    doc.documentElement.appendChild(imported)
+
+    return {
+        id,
+        name,
+        index: existing.length,
+        cellCount: imported.querySelectorAll("mxCell").length,
+    }
+}
+
+/** Rename the page matched by selector. Returns true on success. */
+export function renamePageInDoc(
+    doc: Document,
+    selector: PageSelector,
+    newName: string,
+): boolean {
+    const found = findPageElement(doc, selector)
+    if (!found) return false
+    found.element.setAttribute("name", newName)
+    return true
+}
+
+/**
+ * Delete a page. Refuses to delete the last remaining page — the embed needs
+ * at least one diagram to render anything, and silently recreating one would
+ * be surprising behaviour for an MCP caller.
+ */
+export function deletePageFromDoc(
+    doc: Document,
+    selector: PageSelector,
+): { ok: boolean; reason?: string; deletedId?: string; deletedIndex?: number } {
+    const pages = listPagesFromDoc(doc)
+    if (pages.length <= 1) {
+        return { ok: false, reason: "Cannot delete the only remaining page" }
+    }
+    const found = findPageElement(doc, selector)
+    if (!found) {
+        return { ok: false, reason: "Page not found" }
+    }
+    const id = found.element.getAttribute("id") || ""
+    const index = found.index
+    found.element.parentNode?.removeChild(found.element)
+    return { ok: true, deletedId: id, deletedIndex: index }
+}

packages/mcp-server/src/xml-validation.ts

@@ -119,8 +119,74 @@ function checkDuplicateAttributes(xml: string): string | null {
     return null
 }
 
-/** Check for duplicate IDs in XML */
+/**
+ * Check for duplicate IDs in XML.
+ *
+ * For multi-page documents (<mxfile> with multiple <diagram> children), cell
+ * IDs are unique **within a page**, not across the whole document — drawio
+ * legitimately reuses "0" and "1" for the root cells of every page. So we
+ * scope the cell-ID uniqueness check per <diagram>, and additionally check
+ * that the <diagram> ids themselves are unique.
+ *
+ * The legacy regex-based check is kept as a fallback for non-mxfile inputs
+ * and for XML that won't DOM-parse.
+ */
 function checkDuplicateIds(xml: string): string | null {
+    // The DOM-aware path only matters for <mxfile> wrappers; for legacy
+    // bare <mxGraphModel> inputs (the overwhelming majority of historic
+    // traffic), the cheap regex fallback at the bottom is enough. A quick
+    // string check avoids paying the DOMParser cost on every call.
+    const mightBeMxFile = /<mxfile[\s>]/i.test(xml)
+
+    // Try DOM-aware, page-scoped check first when the input looks mxfile-ish.
+    if (mightBeMxFile)
+        try {
+            const doc = new DOMParser().parseFromString(xml, "text/xml")
+            if (!doc.querySelector("parsererror")) {
+                const rootEl = doc.documentElement
+                if (rootEl && rootEl.tagName === "mxfile") {
+                    const diagrams = doc.querySelectorAll("diagram")
+
+                    // 1) <diagram> ids must be unique across the file.
+                    const diagramIds = new Map<string, number>()
+                    diagrams.forEach((d) => {
+                        const id = d.getAttribute("id")
+                        if (id)
+                            diagramIds.set(id, (diagramIds.get(id) || 0) + 1)
+                    })
+                    const dupDiagrams = Array.from(diagramIds.entries())
+                        .filter(([, c]) => c > 1)
+                        .map(([id]) => `'${id}'`)
+                    if (dupDiagrams.length > 0) {
+                        return `Invalid XML: Found duplicate <diagram> id(s): ${dupDiagrams.slice(0, 3).join(", ")}. Each page must have a unique id.`
+                    }
+
+                    // 2) Within each page, mxCell ids must be unique.
+                    for (let i = 0; i < diagrams.length; i++) {
+                        const diagram = diagrams[i]
+                        const pageId =
+                            diagram.getAttribute("id") || `(index ${i})`
+                        const cells = diagram.querySelectorAll("mxCell")
+                        const cellIds = new Map<string, number>()
+                        cells.forEach((c) => {
+                            const id = c.getAttribute("id")
+                            if (id) cellIds.set(id, (cellIds.get(id) || 0) + 1)
+                        })
+                        const dups = Array.from(cellIds.entries())
+                            .filter(([, c]) => c > 1)
+                            .map(([id, count]) => `'${id}' (${count}x)`)
+                        if (dups.length > 0) {
+                            return `Invalid XML: Found duplicate cell ID(s) in page "${pageId}": ${dups.slice(0, 3).join(", ")}. All mxCell ids must be unique within a page.`
+                        }
+                    }
+                    return null
+                }
+            }
+        } catch {
+            // fall through to regex
+        }
+
+    // Legacy regex-based check for bare <mxGraphModel> and parse-error cases.
     const idPattern = /\bid\s*=\s*["']([^"']+)["']/gi
     const ids = new Map<string, number>()
     let idMatch
@@ -770,35 +836,46 @@ export function autoFixXml(xml: string): { fixed: string; fixes: string[] } {
         fixes.push(`Fixed ${trueNestedFixed} true nested mxCell(s)`)
     }
 
-    // 22. Fix duplicate IDs by appending suffix
-    const seenIds = new Map<string, number>()
-    const duplicateIds: string[] = []
+    // 22. Fix duplicate IDs by appending suffix.
+    // Skipped for multi-page <mxfile> documents — cell ids "0" and "1" repeat
+    // across pages legitimately (every page has its own <root> with id="0"/"1"
+    // sentinel cells). Renaming them would break drawio's parent references.
+    // For mxfile inputs, duplicate-id validation is page-scoped in
+    // checkDuplicateIds() and a true duplicate produces a hard error rather
+    // than a silent rename.
+    if (!/<mxfile[\s>]/i.test(fixed)) {
+        const seenIds = new Map<string, number>()
+        const duplicateIds: string[] = []
 
-    const idPattern = /\bid\s*=\s*["']([^"']+)["']/gi
-    let idMatch
-    while ((idMatch = idPattern.exec(fixed)) !== null) {
-        const id = idMatch[1]
-        seenIds.set(id, (seenIds.get(id) || 0) + 1)
-    }
+        const idPattern = /\bid\s*=\s*["']([^"']+)["']/gi
+        let idMatch
+        while ((idMatch = idPattern.exec(fixed)) !== null) {
+            const id = idMatch[1]
+            seenIds.set(id, (seenIds.get(id) || 0) + 1)
+        }
 
-    for (const [id, count] of seenIds) {
-        if (count > 1) duplicateIds.push(id)
-    }
+        for (const [id, count] of seenIds) {
+            if (count > 1) duplicateIds.push(id)
+        }
 
-    if (duplicateIds.length > 0) {
-        const idCounters = new Map<string, number>()
-        fixed = fixed.replace(/\bid\s*=\s*["']([^"']+)["']/gi, (match, id) => {
-            if (!duplicateIds.includes(id)) return match
+        if (duplicateIds.length > 0) {
+            const idCounters = new Map<string, number>()
+            fixed = fixed.replace(
+                /\bid\s*=\s*["']([^"']+)["']/gi,
+                (match, id) => {
+                    if (!duplicateIds.includes(id)) return match
 
-            const count = idCounters.get(id) || 0
-            idCounters.set(id, count + 1)
+                    const count = idCounters.get(id) || 0
+                    idCounters.set(id, count + 1)
 
-            if (count === 0) return match
+                    if (count === 0) return match
 
-            const newId = `${id}_dup${count}`
-            return match.replace(id, newId)
-        })
-        fixes.push(`Renamed ${duplicateIds.length} duplicate ID(s)`)
+                    const newId = `${id}_dup${count}`
+                    return match.replace(id, newId)
+                },
+            )
+            fixes.push(`Renamed ${duplicateIds.length} duplicate ID(s)`)
+        }
     }
 
     // 23. Fix empty id attributes

packages/mcp-server/tests/edit-gate.test.ts

@@ -0,0 +1,132 @@
+/**
+ * Unit tests for the edit_diagram workflow gate (edit-gate.ts).
+ *
+ * The gate replaced the old 30-second wall-clock rule (#885): an edit is
+ * allowed when the model has seen the current browser state, no matter how
+ * long ago — and rejected when the browser state moved since. "Seen" is
+ * judged structurally, so draw.io's re-serialisation of the same content
+ * (attribute order, whitespace, viewport attributes, wrapper shape) never
+ * reads as a user edit.
+ */
+
+import { DOMParser } from "linkedom"
+import { beforeAll, describe, expect, it } from "vitest"
+
+beforeAll(() => {
+    ;(globalThis as any).DOMParser = DOMParser
+})
+
+import { checkEditGate, contentFingerprint } from "../src/edit-gate.js"
+
+const XML_A = `<mxfile host="app.diagrams.net"><diagram id="p1" name="Page-1"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="box1" value="Hello" style="rounded=0;" vertex="1" parent="1"><mxGeometry x="40" y="40" width="120" height="60" as="geometry"/></mxCell></root></mxGraphModel></diagram></mxfile>`
+
+// The same document as draw.io re-serialises it on autosave: different host,
+// regenerated diagram id, viewport attributes on mxGraphModel, re-ordered
+// cell attributes, pretty-printed whitespace.
+const XML_A_RESERIALIZED = `<mxfile host="embed.diagrams.net">
+  <diagram id="regenerated-id" name="Page-1">
+    <mxGraphModel dx="1596" dy="743" grid="1" pageWidth="827" pageHeight="1169">
+      <root>
+        <mxCell id="0" />
+        <mxCell id="1" parent="0" />
+        <mxCell id="box1" parent="1" style="rounded=0;" value="Hello" vertex="1">
+          <mxGeometry height="60" width="120" x="40" y="40" as="geometry" />
+        </mxCell>
+      </root>
+    </mxGraphModel>
+  </diagram>
+</mxfile>`
+
+// A real user edit: box1 moved to a different position.
+const XML_B = XML_A.replace('x="40" y="40"', 'x="300" y="200"')
+
+// Bare mxGraphModel with identical page content to XML_A.
+const XML_A_BARE = `<mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="box1" value="Hello" style="rounded=0;" vertex="1" parent="1"><mxGeometry x="40" y="40" width="120" height="60" as="geometry"/></mxCell></root></mxGraphModel>`
+
+describe("checkEditGate", () => {
+    it("rejects when no diagram context was ever established", () => {
+        expect(checkEditGate("", XML_A)).toEqual({
+            ok: false,
+            reason: "no-context",
+        })
+    })
+
+    it("allows when the browser state is exactly what the model saw", () => {
+        expect(checkEditGate(XML_A, XML_A)).toEqual({ ok: true })
+    })
+
+    it("allows when the browser state is a re-serialisation of the same content", () => {
+        expect(checkEditGate(XML_A, XML_A_RESERIALIZED)).toEqual({ ok: true })
+    })
+
+    it("rejects when a cell actually changed", () => {
+        expect(checkEditGate(XML_A, XML_B)).toEqual({
+            ok: false,
+            reason: "stale",
+        })
+    })
+
+    it("rejects a real edit even when wrapped in re-serialisation noise", () => {
+        const movedAndReserialized = XML_A_RESERIALIZED.replace(
+            'x="40" y="40"',
+            'x="300" y="200"',
+        )
+        expect(checkEditGate(XML_A, movedAndReserialized)).toEqual({
+            ok: false,
+            reason: "stale",
+        })
+    })
+
+    it("allows when the store has no live entry to compare against", () => {
+        expect(checkEditGate(XML_A, "")).toEqual({ ok: true })
+    })
+
+    // A bare <mxGraphModel> push carries no page name, so the gate must not
+    // compare the invented "Page-1" wrapper name against the real one.
+    it("allows a bare mxGraphModel push when the page has a custom name", () => {
+        const seenRenamed = XML_A.replace('name="Page-1"', 'name="Arch"')
+        expect(checkEditGate(seenRenamed, XML_A_BARE)).toEqual({ ok: true })
+    })
+
+    it("still rejects a bare mxGraphModel push whose cells changed", () => {
+        const seenRenamed = XML_A.replace('name="Page-1"', 'name="Arch"')
+        const bareMoved = XML_A_BARE.replace('x="40" y="40"', 'x="300" y="200"')
+        expect(checkEditGate(seenRenamed, bareMoved)).toEqual({
+            ok: false,
+            reason: "stale",
+        })
+    })
+})
+
+describe("contentFingerprint", () => {
+    it("is invariant under draw.io re-serialisation", () => {
+        expect(contentFingerprint(XML_A)).toBe(
+            contentFingerprint(XML_A_RESERIALIZED),
+        )
+    })
+
+    it("treats a bare mxGraphModel like its one-page mxfile wrapping", () => {
+        expect(contentFingerprint(XML_A_BARE)).toBe(contentFingerprint(XML_A))
+    })
+
+    it("changes when a cell attribute changes", () => {
+        expect(contentFingerprint(XML_A)).not.toBe(contentFingerprint(XML_B))
+    })
+
+    it("changes when a page is renamed", () => {
+        const renamed = XML_A.replace('name="Page-1"', 'name="Renamed"')
+        expect(contentFingerprint(XML_A)).not.toBe(contentFingerprint(renamed))
+    })
+
+    it("changes when a page is added", () => {
+        const twoPages = XML_A.replace(
+            "</mxfile>",
+            `<diagram id="p2" name="Page-2"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/></root></mxGraphModel></diagram></mxfile>`,
+        )
+        expect(contentFingerprint(XML_A)).not.toBe(contentFingerprint(twoPages))
+    })
+
+    it("falls back to the raw string for unparseable input", () => {
+        expect(contentFingerprint("not xml at all")).toBe("not xml at all")
+    })
+})

packages/mcp-server/tests/load-diagram.test.ts

@@ -0,0 +1,126 @@
+/**
+ * Unit tests for load_diagram's file parsing (load-diagram.ts).
+ *
+ * A .drawio file stores each page's <mxGraphModel> either as plain XML or
+ * as draw.io's compressed default (encodeURIComponent → raw deflate →
+ * base64 text content). The loader must produce the canonical session
+ * shape: an <mxfile> whose every page is plain XML.
+ */
+
+import { deflateRawSync } from "node:zlib"
+import { DOMParser } from "linkedom"
+import { beforeAll, describe, expect, it } from "vitest"
+
+// Install the DOM polyfills exactly as index.ts does at runtime.
+beforeAll(() => {
+    ;(globalThis as any).DOMParser = DOMParser
+    class XMLSerializerPolyfill {
+        serializeToString(node: any): string {
+            if (node.outerHTML !== undefined) return node.outerHTML
+            if (node.documentElement) return node.documentElement.outerHTML
+            return ""
+        }
+    }
+    ;(globalThis as any).XMLSerializer = XMLSerializerPolyfill
+})
+
+import {
+    decompressPageContent,
+    parseDrawioFileContent,
+} from "../src/load-diagram.js"
+
+const MODEL_XML = `<mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="box1" value="Hello" style="rounded=0;" vertex="1" parent="1"><mxGeometry x="40" y="40" width="120" height="60" as="geometry"/></mxCell></root></mxGraphModel>`
+
+/** Compress a page body exactly the way draw.io does when saving. */
+function drawioCompress(xml: string): string {
+    return deflateRawSync(
+        Buffer.from(encodeURIComponent(xml), "utf-8"),
+    ).toString("base64")
+}
+
+const PLAIN_MXFILE = `<mxfile host="app.diagrams.net"><diagram id="p1" name="Page-1">${MODEL_XML}</diagram></mxfile>`
+const COMPRESSED_MXFILE = `<mxfile host="app.diagrams.net" compressed="true"><diagram id="p1" name="Page-1">${drawioCompress(MODEL_XML)}</diagram></mxfile>`
+
+describe("decompressPageContent", () => {
+    it("round-trips draw.io's compressed format", () => {
+        expect(decompressPageContent(drawioCompress(MODEL_XML))).toBe(MODEL_XML)
+    })
+
+    it("handles non-URI-encoded legacy payloads", () => {
+        const legacy = deflateRawSync(Buffer.from(MODEL_XML, "utf-8")).toString(
+            "base64",
+        )
+        expect(decompressPageContent(legacy)).toBe(MODEL_XML)
+    })
+
+    it("returns null for garbage", () => {
+        expect(decompressPageContent("not base64 deflate")).toBeNull()
+    })
+})
+
+describe("parseDrawioFileContent", () => {
+    it("passes a plain-XML mxfile through unchanged", () => {
+        const r = parseDrawioFileContent(PLAIN_MXFILE)
+        expect(r).toEqual({ ok: true, xml: PLAIN_MXFILE })
+    })
+
+    it("wraps a bare mxGraphModel into a one-page mxfile", () => {
+        const r = parseDrawioFileContent(MODEL_XML)
+        expect(r.ok).toBe(true)
+        if (r.ok) {
+            expect(r.xml).toContain("<mxfile")
+            expect(r.xml).toContain('value="Hello"')
+        }
+    })
+
+    it("decompresses a compressed mxfile into plain XML pages", () => {
+        const r = parseDrawioFileContent(COMPRESSED_MXFILE)
+        expect(r.ok).toBe(true)
+        if (r.ok) {
+            expect(r.xml).toContain("<mxGraphModel")
+            expect(r.xml).toContain('value="Hello"')
+            // The compressed blob must be gone.
+            expect(r.xml).not.toContain(drawioCompress(MODEL_XML))
+        }
+    })
+
+    it("decompresses only the compressed pages of a mixed file", () => {
+        const mixed = `<mxfile><diagram id="a" name="Plain">${MODEL_XML}</diagram><diagram id="b" name="Squeezed">${drawioCompress(MODEL_XML)}</diagram></mxfile>`
+        const r = parseDrawioFileContent(mixed)
+        expect(r.ok).toBe(true)
+        if (r.ok) {
+            const doc = new DOMParser().parseFromString(r.xml, "text/xml")
+            const diagrams = Array.from(
+                doc.querySelectorAll("diagram"),
+            ) as Element[]
+            expect(diagrams).toHaveLength(2)
+            for (const d of diagrams) {
+                expect(d.querySelector("mxGraphModel")).not.toBeNull()
+            }
+        }
+    })
+
+    it("keeps empty pages as-is", () => {
+        const withEmpty = `<mxfile><diagram id="a" name="Page-1">${MODEL_XML}</diagram><diagram id="b" name="Empty"></diagram></mxfile>`
+        const r = parseDrawioFileContent(withEmpty)
+        expect(r).toEqual({ ok: true, xml: withEmpty })
+    })
+
+    it("rejects empty files", () => {
+        const r = parseDrawioFileContent("   ")
+        expect(r.ok).toBe(false)
+    })
+
+    it("rejects non-drawio content", () => {
+        const r = parseDrawioFileContent("<svg><rect/></svg>")
+        expect(r.ok).toBe(false)
+        if (!r.ok) expect(r.error).toContain("Not a draw.io file")
+    })
+
+    it("rejects a page whose content is neither XML nor compressed", () => {
+        const bad = `<mxfile><diagram id="a" name="Broken">!!! not a diagram !!!</diagram></mxfile>`
+        const r = parseDrawioFileContent(bad)
+        expect(r.ok).toBe(false)
+        if (!r.ok) expect(r.error).toContain('"Broken"')
+    })
+})

packages/mcp-server/tests/multi-page.test.ts

@@ -0,0 +1,545 @@
+/**
+ * Unit tests for multi-page (mxfile) support.
+ *
+ * Pinned to the user-visible contract described in
+ * multi-page-mcp-support-plan.md §5 (acceptance criteria):
+ *
+ *   AC1. create_new_diagram accepts both bare <mxGraphModel> and full <mxfile>.
+ *   AC2. get_diagram returns the full <mxfile> regardless of page count.
+ *   AC3. edit_diagram accepts an optional page selector.
+ *   AC6. Two tool calls reproduce the Transformer/CNN scenario.
+ *   AC9. The wrapper-injection hack at http-server.ts:845 is unnecessary.
+ *
+ * These tests pin the helpers (pages.ts), the validator update
+ * (xml-validation.ts), and the page-targeted edit logic
+ * (diagram-operations.ts) — i.e. the layers underneath the MCP tool surface.
+ */
+
+import { DOMParser } from "linkedom"
+import { beforeAll, describe, expect, it } from "vitest"
+
+// Install the DOM polyfill exactly as index.ts does at runtime — the
+// helpers under test rely on it.
+beforeAll(() => {
+    ;(globalThis as any).DOMParser = DOMParser
+    class XMLSerializerPolyfill {
+        serializeToString(node: any): string {
+            if (node.outerHTML !== undefined) return node.outerHTML
+            if (node.documentElement) return node.documentElement.outerHTML
+            return ""
+        }
+    }
+    ;(globalThis as any).XMLSerializer = XMLSerializerPolyfill
+})
+
+import { applyDiagramOperations } from "../src/diagram-operations.js"
+import {
+    addPageToDoc,
+    deletePageFromDoc,
+    findPageElement,
+    generatePageId,
+    hasPageSelector,
+    isMxFile,
+    isMxGraphModel,
+    listPagesFromDoc,
+    normalizeToMxfile,
+    parseMxfile,
+    projectPage,
+    renamePageInDoc,
+    serializeMxfile,
+} from "../src/pages.js"
+import { validateAndFixXml } from "../src/xml-validation.js"
+
+const BARE_MODEL_ONE_CELL = `<mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="2" vertex="1" parent="1" value="Hello"><mxGeometry x="40" y="40" width="100" height="40" as="geometry"/></mxCell></root></mxGraphModel>`
+
+const TWO_PAGE_MXFILE = `<mxfile host="app.diagrams.net"><diagram id="page-transformer" name="Transformer"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="2" vertex="1" parent="1" value="Encoder"><mxGeometry x="40" y="40" width="120" height="60" as="geometry"/></mxCell></root></mxGraphModel></diagram><diagram id="page-cnn" name="CNN"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="2" vertex="1" parent="1" value="Conv1"><mxGeometry x="40" y="40" width="120" height="60" as="geometry"/></mxCell></root></mxGraphModel></diagram></mxfile>`
+
+describe("pages.ts — shape detection", () => {
+    it("isMxFile detects a multi-page mxfile", () => {
+        expect(isMxFile(TWO_PAGE_MXFILE)).toBe(true)
+    })
+
+    it("isMxFile rejects a bare mxGraphModel", () => {
+        expect(isMxFile(BARE_MODEL_ONE_CELL)).toBe(false)
+    })
+
+    it("isMxGraphModel detects a bare model", () => {
+        expect(isMxGraphModel(BARE_MODEL_ONE_CELL)).toBe(true)
+        expect(isMxGraphModel(TWO_PAGE_MXFILE)).toBe(false)
+    })
+
+    it("isMxFile tolerates an XML declaration prefix", () => {
+        expect(
+            isMxFile(
+                `<?xml version="1.0" encoding="UTF-8"?>${TWO_PAGE_MXFILE}`,
+            ),
+        ).toBe(true)
+    })
+})
+
+describe("pages.ts — normalizeToMxfile (backward compatibility, AC1)", () => {
+    it("wraps a bare mxGraphModel into a single-page mxfile", () => {
+        const out = normalizeToMxfile(BARE_MODEL_ONE_CELL, {
+            pageId: "p1",
+            pageName: "Page-1",
+        })
+        expect(out).not.toBeNull()
+        expect(out).toMatch(/^<mxfile/)
+        expect(out).toContain(`<diagram id="p1" name="Page-1">`)
+        expect(out).toContain("<mxGraphModel>")
+    })
+
+    it("returns mxfile inputs unchanged", () => {
+        const out = normalizeToMxfile(TWO_PAGE_MXFILE)
+        expect(out).toBe(TWO_PAGE_MXFILE)
+    })
+
+    it("returns null for neither shape", () => {
+        expect(normalizeToMxfile("<random/>")).toBeNull()
+        expect(normalizeToMxfile("")).toBeNull()
+    })
+
+    it("generated page ids look reasonable", () => {
+        for (let i = 0; i < 50; i++) {
+            const id = generatePageId()
+            expect(id).toMatch(/^[a-z0-9]+-[a-z0-9]+$/)
+        }
+    })
+
+    it("strips a leading <?xml ?> declaration when wrapping a bare model", () => {
+        // Regression for the bug Copilot caught: isMxGraphModel tolerates a
+        // declaration prefix, but the wrapper used to embed it inside
+        // <diagram>, producing invalid XML (<?xml ?> is only valid at the
+        // document start). The result must round-trip through parseMxfile
+        // and the declaration must be gone from inside <diagram>.
+        const withDecl = `<?xml version="1.0" encoding="UTF-8"?>${BARE_MODEL_ONE_CELL}`
+        const out = normalizeToMxfile(withDecl, {
+            pageId: "p1",
+            pageName: "Page-1",
+        })
+        expect(out).not.toBeNull()
+        expect(out).toMatch(/^<mxfile/)
+        // No <?xml inside the body of the wrapped document.
+        expect(out!.indexOf("<?xml")).toBe(-1)
+        // And it must still parse cleanly.
+        const doc = parseMxfile(out!)
+        expect(doc).not.toBeNull()
+        expect(listPagesFromDoc(doc!)).toHaveLength(1)
+    })
+})
+
+describe("pages.ts — addPageToDoc input validation", () => {
+    it("rejects opts.xml shaped as a full <mxfile>", () => {
+        // Regression for the Copilot-flagged bug: an mxfile passed as
+        // starting page xml would end up nested inside <diagram>, corrupting
+        // the document. Must throw with a clear message.
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        expect(() =>
+            addPageToDoc(doc, { name: "Bad", xml: TWO_PAGE_MXFILE }),
+        ).toThrowError(/bare <mxGraphModel>/i)
+    })
+
+    it("rejects opts.xml that is neither mxGraphModel nor mxfile", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        expect(() =>
+            addPageToDoc(doc, { name: "Junk", xml: "<root><x/></root>" }),
+        ).toThrowError(/bare <mxGraphModel>/i)
+    })
+
+    it("strips a <?xml ?> declaration prefix on opts.xml", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        const withDecl = `<?xml version="1.0"?>${BARE_MODEL_ONE_CELL}`
+        const info = addPageToDoc(doc, { name: "Sequence", xml: withDecl })
+        expect(info.cellCount).toBeGreaterThanOrEqual(3)
+        // Serialised document must not have <?xml ?> inside <diagram>.
+        const out = serializeMxfile(doc)
+        // The mxfile may have one <?xml ?> at the very start (the doc decl),
+        // but no further occurrence inside <diagram>.
+        const matches = out.match(/<\?xml/g) || []
+        expect(matches.length).toBeLessThanOrEqual(1)
+    })
+})
+
+describe("pages.ts — listPagesFromDoc / findPageElement", () => {
+    it("lists both pages in a two-page mxfile", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        const pages = listPagesFromDoc(doc)
+        expect(pages).toHaveLength(2)
+        expect(pages[0]).toMatchObject({
+            id: "page-transformer",
+            name: "Transformer",
+            index: 0,
+        })
+        expect(pages[1]).toMatchObject({
+            id: "page-cnn",
+            name: "CNN",
+            index: 1,
+        })
+        // Cell count is per-page (3 cells per page including the two root sentinels).
+        expect(pages[0].cellCount).toBe(3)
+        expect(pages[1].cellCount).toBe(3)
+    })
+
+    it("findPageElement defaults to the first page when selector is empty", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        const found = findPageElement(doc)
+        expect(found?.index).toBe(0)
+        expect(found?.element.getAttribute("id")).toBe("page-transformer")
+    })
+
+    it("findPageElement matches by id, name, and index — id wins when several are set", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        expect(findPageElement(doc, { page_id: "page-cnn" })?.index).toBe(1)
+        expect(findPageElement(doc, { page_name: "CNN" })?.index).toBe(1)
+        expect(findPageElement(doc, { page_index: 1 })?.index).toBe(1)
+        // id beats name beats index
+        const winner = findPageElement(doc, {
+            page_id: "page-cnn",
+            page_name: "Transformer",
+            page_index: 0,
+        })
+        expect(winner?.index).toBe(1)
+    })
+
+    it("findPageElement returns null for an unknown selector", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        expect(findPageElement(doc, { page_id: "ghost" })).toBeNull()
+        expect(findPageElement(doc, { page_name: "ghost" })).toBeNull()
+        expect(findPageElement(doc, { page_index: 99 })).toBeNull()
+        expect(findPageElement(doc, { page_index: -1 })).toBeNull()
+    })
+
+    it("hasPageSelector correctly detects empty vs populated selectors", () => {
+        expect(hasPageSelector()).toBe(false)
+        expect(hasPageSelector({})).toBe(false)
+        expect(hasPageSelector({ page_id: "x" })).toBe(true)
+        expect(hasPageSelector({ page_index: 0 })).toBe(true)
+    })
+})
+
+describe("pages.ts — addPageToDoc", () => {
+    it("appends a third page and returns its info", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        const info = addPageToDoc(doc, { name: "Sequence" })
+        expect(info.name).toBe("Sequence")
+        expect(info.index).toBe(2)
+        expect(info.id).toMatch(/.+/)
+        const pages = listPagesFromDoc(doc)
+        expect(pages).toHaveLength(3)
+        expect(pages[2].name).toBe("Sequence")
+    })
+
+    it("rejects a duplicate explicit id", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        expect(() =>
+            addPageToDoc(doc, { id: "page-transformer", name: "X" }),
+        ).toThrowError(/already exists/)
+    })
+
+    it("uses a sensible default name when none is supplied", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        const info = addPageToDoc(doc, {})
+        expect(info.name).toBe("Page-3")
+    })
+
+    it("accepts an inline starting mxGraphModel", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        const inner = `<mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="2" vertex="1" parent="1" value="A"><mxGeometry x="10" y="10" width="20" height="20" as="geometry"/></mxCell></root></mxGraphModel>`
+        const info = addPageToDoc(doc, { name: "Custom", xml: inner })
+        expect(info.cellCount).toBeGreaterThanOrEqual(3)
+    })
+})
+
+describe("pages.ts — renamePageInDoc / deletePageFromDoc", () => {
+    it("renames an existing page by name", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        const ok = renamePageInDoc(doc, { page_name: "CNN" }, "CNN-v2")
+        expect(ok).toBe(true)
+        const pages = listPagesFromDoc(doc)
+        expect(pages[1].name).toBe("CNN-v2")
+    })
+
+    it("rename returns false when target page is missing", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        expect(renamePageInDoc(doc, { page_id: "ghost" }, "Z")).toBe(false)
+    })
+
+    it("deletes a page and removes the <diagram> element from the doc", () => {
+        const doc = parseMxfile(TWO_PAGE_MXFILE)!
+        const outcome = deletePageFromDoc(doc, { page_id: "page-cnn" })
+        expect(outcome.ok).toBe(true)
+        expect(outcome.deletedId).toBe("page-cnn")
+        expect(listPagesFromDoc(doc)).toHaveLength(1)
+    })
+
+    it("refuses to delete the only remaining page", () => {
+        // Build a single-page doc to test the guard.
+        const single = normalizeToMxfile(BARE_MODEL_ONE_CELL)!
+        const doc = parseMxfile(single)!
+        const outcome = deletePageFromDoc(doc, { page_index: 0 })
+        expect(outcome.ok).toBe(false)
+        expect(outcome.reason).toMatch(/only remaining page/)
+    })
+})
+
+describe("xml-validation.ts — multi-page support", () => {
+    it("accepts a valid two-page mxfile (the exact payload that used to fail)", () => {
+        const result = validateAndFixXml(TWO_PAGE_MXFILE)
+        expect(result.valid).toBe(true)
+        expect(result.error).toBeNull()
+    })
+
+    it("does NOT flag root sentinel ids 0 and 1 repeating across pages", () => {
+        // This is the regression the planning doc explicitly called out:
+        // before this work, the legacy regex-based duplicate-id check rejected
+        // any multi-page document because cells "0" and "1" appear in every page.
+        const result = validateAndFixXml(TWO_PAGE_MXFILE)
+        expect(result.valid).toBe(true)
+    })
+
+    it("rejects duplicate cell ids WITHIN a single page", () => {
+        const bad = `<mxfile host="app.diagrams.net"><diagram id="p1" name="P1"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="dup" vertex="1" parent="1"/><mxCell id="dup" vertex="1" parent="1"/></root></mxGraphModel></diagram></mxfile>`
+        const result = validateAndFixXml(bad)
+        expect(result.valid).toBe(false)
+        expect(result.error).toMatch(/duplicate cell ID/i)
+    })
+
+    it("rejects duplicate <diagram> ids across the file", () => {
+        const bad = `<mxfile host="app.diagrams.net"><diagram id="p1" name="A"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/></root></mxGraphModel></diagram><diagram id="p1" name="B"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/></root></mxGraphModel></diagram></mxfile>`
+        const result = validateAndFixXml(bad)
+        expect(result.valid).toBe(false)
+        expect(result.error).toMatch(/duplicate <diagram> id/i)
+    })
+
+    it("still validates a bare <mxGraphModel> (legacy callers)", () => {
+        const result = validateAndFixXml(BARE_MODEL_ONE_CELL)
+        expect(result.valid).toBe(true)
+    })
+
+    it("auto-fix does NOT rename mxfile root cells 0/1 (would break drawio refs)", () => {
+        // Build a doc that triggers some other auto-fix (so autoFixXml runs)
+        // but contains valid multi-page 0/1 cells that must NOT be renamed.
+        const malformedButMultiPage = `<mxfile host="app.diagrams.net"><diagram id="p1" name="A"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="2" vertex="1" parent="1" value="Q & A"><mxGeometry x="0" y="0" width="10" height="10" as="geometry"/></mxCell></root></mxGraphModel></diagram><diagram id="p2" name="B"><mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/></root></mxGraphModel></diagram></mxfile>`
+        const result = validateAndFixXml(malformedButMultiPage)
+        // The doc has an unescaped & — autoFix will repair that. After repair
+        // it should be valid AND must not have renamed the 0/1 cells.
+        const finalXml = result.fixed || malformedButMultiPage
+        expect(finalXml).not.toMatch(/id="0_dup/)
+        expect(finalXml).not.toMatch(/id="1_dup/)
+    })
+})
+
+describe("diagram-operations.ts — page-targeted edits (AC3)", () => {
+    it("adds a cell to the targeted page by id, leaving the other page untouched", () => {
+        const { result, errors } = applyDiagramOperations(
+            TWO_PAGE_MXFILE,
+            [
+                {
+                    operation: "add",
+                    cell_id: "conv-2",
+                    new_xml: `<mxCell id="conv-2" vertex="1" parent="1" value="Conv2"><mxGeometry x="200" y="40" width="120" height="60" as="geometry"/></mxCell>`,
+                },
+            ],
+            { page_id: "page-cnn" },
+        )
+        expect(errors).toHaveLength(0)
+        const doc = parseMxfile(result)!
+        const pages = listPagesFromDoc(doc)
+        // Transformer untouched (still 3 cells), CNN gained one cell.
+        expect(pages[0].cellCount).toBe(3)
+        expect(pages[1].cellCount).toBe(4)
+        expect(result).toContain(`id="conv-2"`)
+    })
+
+    it("defaults to the first page when no selector is given", () => {
+        const { result, errors } = applyDiagramOperations(TWO_PAGE_MXFILE, [
+            {
+                operation: "add",
+                cell_id: "shape-x",
+                new_xml: `<mxCell id="shape-x" vertex="1" parent="1"><mxGeometry x="0" y="0" width="10" height="10" as="geometry"/></mxCell>`,
+            },
+        ])
+        expect(errors).toHaveLength(0)
+        const doc = parseMxfile(result)!
+        const pages = listPagesFromDoc(doc)
+        expect(pages[0].cellCount).toBe(4) // Transformer (first page) grew
+        expect(pages[1].cellCount).toBe(3) // CNN untouched
+    })
+
+    it("errors clearly when the page is not found", () => {
+        const { errors } = applyDiagramOperations(
+            TWO_PAGE_MXFILE,
+            [
+                {
+                    operation: "delete",
+                    cell_id: "2",
+                },
+            ],
+            { page_id: "does-not-exist" },
+        )
+        expect(errors).toHaveLength(1)
+        expect(errors[0].message).toMatch(/Page.*not found/i)
+        // Page-level errors carry an empty cellId — edit_diagram relies on
+        // this to distinguish "nothing applied" from per-cell warnings and
+        // return a hard error instead of a false success.
+        expect(errors[0].cellId).toBe("")
+    })
+
+    it("delete on page 2 does NOT touch page 1's mxCell with the same id", () => {
+        // Both pages have a cell with id="2". A delete on CNN's "2" must not
+        // remove Transformer's "2".
+        const { result, errors } = applyDiagramOperations(
+            TWO_PAGE_MXFILE,
+            [{ operation: "delete", cell_id: "2" }],
+            { page_id: "page-cnn" },
+        )
+        expect(errors).toHaveLength(0)
+        const doc = parseMxfile(result)!
+        const pages = listPagesFromDoc(doc)
+        // CNN lost its only non-sentinel cell, Transformer keeps its three.
+        expect(pages[1].cellCount).toBe(2)
+        expect(pages[0].cellCount).toBe(3)
+    })
+
+    it("legacy bare-mxGraphModel input still works when no selector is given", () => {
+        const { result, errors } = applyDiagramOperations(BARE_MODEL_ONE_CELL, [
+            {
+                operation: "add",
+                cell_id: "new",
+                new_xml: `<mxCell id="new" vertex="1" parent="1"><mxGeometry x="100" y="100" width="50" height="50" as="geometry"/></mxCell>`,
+            },
+        ])
+        expect(errors).toHaveLength(0)
+        expect(result).toContain(`id="new"`)
+    })
+
+    it("page selector on a bare mxGraphModel returns a clear error", () => {
+        const { errors } = applyDiagramOperations(
+            BARE_MODEL_ONE_CELL,
+            [{ operation: "delete", cell_id: "2" }],
+            { page_id: "page-1" },
+        )
+        expect(errors).toHaveLength(1)
+        expect(errors[0].message).toMatch(/not multi-page/i)
+    })
+})
+
+describe("export_diagram — single-page projection (regression for selectPage bug)", () => {
+    // The previous implementation tried to drive drawio's iframe with an
+    // `action: 'selectPage'` postMessage, which the embed protocol silently
+    // ignores. The result was that PNG/SVG exports targeted the currently
+    // active tab regardless of the page selector — two visually different
+    // pages would yield byte-identical PNGs.
+    //
+    // The current implementation builds a single-page <mxfile> projection via
+    // the shared pages.ts:projectPage helper and hands it to the browser
+    // bridge to load BEFORE triggering export. These tests pin that helper so
+    // a future refactor can't silently re-introduce the multi-page drift.
+    function projectSinglePage(fullMxfile: string, sel: any): string {
+        const result = projectPage(fullMxfile, sel)
+        if (!result.ok) throw new Error(`projection failed: ${result.reason}`)
+        return result.xml
+    }
+
+    it("returns a parse error for a non-mxfile source", () => {
+        const result = projectPage(BARE_MODEL_ONE_CELL, { page_id: "x" })
+        expect(result.ok).toBe(false)
+        if (!result.ok) expect(result.reason).toBe("parse")
+    })
+
+    it("returns a notfound error for an unknown page", () => {
+        const result = projectPage(TWO_PAGE_MXFILE, { page_id: "ghost" })
+        expect(result.ok).toBe(false)
+        if (!result.ok) expect(result.reason).toBe("notfound")
+    })
+
+    it("projects only the requested page when targeted by id", () => {
+        const projected = projectSinglePage(TWO_PAGE_MXFILE, {
+            page_id: "page-cnn",
+        })
+        const pages = listPagesFromDoc(parseMxfile(projected)!)
+        expect(pages).toHaveLength(1)
+        expect(pages[0].id).toBe("page-cnn")
+        expect(pages[0].name).toBe("CNN")
+        // The projection must NOT contain the Transformer page anywhere.
+        expect(projected).not.toContain('id="page-transformer"')
+        expect(projected).not.toContain('name="Transformer"')
+    })
+
+    it("projects only the requested page when targeted by name", () => {
+        const projected = projectSinglePage(TWO_PAGE_MXFILE, {
+            page_name: "Transformer",
+        })
+        const pages = listPagesFromDoc(parseMxfile(projected)!)
+        expect(pages).toHaveLength(1)
+        expect(pages[0].name).toBe("Transformer")
+        expect(projected).not.toContain('id="page-cnn"')
+    })
+
+    it("projects only the requested page when targeted by index", () => {
+        const projected = projectSinglePage(TWO_PAGE_MXFILE, {
+            page_index: 1,
+        })
+        const pages = listPagesFromDoc(parseMxfile(projected)!)
+        expect(pages).toHaveLength(1)
+        expect(pages[0].index).toBe(0) // re-indexed: it's the only page in the projection
+        expect(pages[0].id).toBe("page-cnn")
+    })
+
+    it("two different page selectors produce visually distinct projections", () => {
+        // The regression: under the old selectPage bug, two exports would
+        // return the same active tab. With the projection approach, the
+        // payload that drawio renders is provably different.
+        const a = projectSinglePage(TWO_PAGE_MXFILE, {
+            page_id: "page-transformer",
+        })
+        const b = projectSinglePage(TWO_PAGE_MXFILE, { page_id: "page-cnn" })
+        expect(a).not.toBe(b)
+        expect(a).toContain('"Encoder"')
+        expect(a).not.toContain('"Conv1"')
+        expect(b).toContain('"Conv1"')
+        expect(b).not.toContain('"Encoder"')
+    })
+
+    it("the projection parses to a valid one-page mxfile", () => {
+        const projected = projectSinglePage(TWO_PAGE_MXFILE, {
+            page_id: "page-cnn",
+        })
+        // Validator accepts it.
+        expect(validateAndFixXml(projected).valid).toBe(true)
+        // And it has a real <root> with the cells from the source page.
+        const doc = parseMxfile(projected)!
+        const root = doc.querySelector("root")
+        expect(root).not.toBeNull()
+        const conv1 = doc.querySelector('mxCell[value="Conv1"]')
+        expect(conv1).not.toBeNull()
+    })
+})
+
+describe("end-to-end — Transformer + CNN scenario (AC6)", () => {
+    it("two tool-equivalent steps reproduce the motivating user scenario", () => {
+        // Step 1 — caller passes a single-page mxfile.
+        const step1 = normalizeToMxfile(BARE_MODEL_ONE_CELL, {
+            pageId: "page-transformer",
+            pageName: "Transformer",
+        })
+        expect(step1).not.toBeNull()
+        let xml = step1 as string
+        const validate1 = validateAndFixXml(xml)
+        expect(validate1.valid).toBe(true)
+
+        // Step 2 — equivalent of add_page("CNN") with a starting model.
+        const doc = parseMxfile(xml)!
+        addPageToDoc(doc, {
+            id: "page-cnn",
+            name: "CNN",
+            xml: `<mxGraphModel><root><mxCell id="0"/><mxCell id="1" parent="0"/><mxCell id="2" vertex="1" parent="1" value="Conv1"><mxGeometry x="40" y="40" width="120" height="60" as="geometry"/></mxCell></root></mxGraphModel>`,
+        })
+        xml = serializeMxfile(doc)
+
+        // Now: two pages, both valid, with the right names.
+        const pages = listPagesFromDoc(parseMxfile(xml)!)
+        expect(pages.map((p) => p.name)).toEqual(["Transformer", "CNN"])
+        expect(validateAndFixXml(xml).valid).toBe(true)
+    })
+})

packages/mcp-server/tests/server-wiring.test.ts

@@ -0,0 +1,142 @@
+/**
+ * Server-wiring test: boot the actual MCP stdio server (from source via tsx)
+ * and drive it the way a real MCP client does — initialize handshake,
+ * tools/list — to catch registration/schema regressions that the unit tests
+ * (which import helpers directly) can't see.
+ *
+ * This replaces the old standalone tests/smoke.mjs, which spawned the BUILT
+ * dist/index.js and was therefore never run in CI (CI doesn't build this
+ * package before testing). Running from source via tsx means it executes as
+ * part of the normal `vitest run`.
+ *
+ * We deliberately do NOT call start_session — it would open a real browser
+ * window via open(). The browser bridge is covered by the Playwright e2e suite.
+ */
+
+import { type ChildProcessWithoutNullStreams, spawn } from "node:child_process"
+import path from "node:path"
+import { fileURLToPath } from "node:url"
+import { afterAll, beforeAll, describe, expect, it } from "vitest"
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+const entry = path.resolve(__dirname, "..", "src", "index.ts")
+const tsxBin = path.resolve(
+    __dirname,
+    "..",
+    "node_modules",
+    ".bin",
+    process.platform === "win32" ? "tsx.cmd" : "tsx",
+)
+
+const EXPECTED_TOOLS = [
+    "start_session",
+    "create_new_diagram",
+    "load_diagram",
+    "edit_diagram",
+    "get_diagram",
+    "export_diagram",
+    "list_pages",
+    "add_page",
+    "rename_page",
+    "delete_page",
+]
+
+let proc: ChildProcessWithoutNullStreams
+let stdoutBuf = ""
+const pending = new Map<
+    number,
+    { resolve: (m: any) => void; reject: (e: Error) => void; timeout: any }
+>()
+let nextId = 1
+
+function send(method: string, params: unknown, isNotification = false) {
+    const msg: Record<string, unknown> = { jsonrpc: "2.0", method, params }
+    if (!isNotification) msg.id = nextId++
+    proc.stdin.write(`${JSON.stringify(msg)}\n`)
+    if (isNotification) return Promise.resolve(undefined)
+    return new Promise<any>((resolve, reject) => {
+        const id = msg.id as number
+        const timeout = setTimeout(() => {
+            pending.delete(id)
+            reject(new Error(`Timed out waiting for response to ${method}`))
+        }, 15000)
+        pending.set(id, { resolve, reject, timeout })
+    })
+}
+
+beforeAll(async () => {
+    proc = spawn(tsxBin, [entry], {
+        stdio: ["pipe", "pipe", "pipe"],
+    }) as ChildProcessWithoutNullStreams
+
+    proc.stdout.on("data", (chunk: Buffer) => {
+        stdoutBuf += chunk.toString()
+        const lines = stdoutBuf.split("\n")
+        stdoutBuf = lines.pop() || ""
+        for (const line of lines) {
+            const trimmed = line.trim()
+            if (!trimmed) continue
+            let msg: any
+            try {
+                msg = JSON.parse(trimmed)
+            } catch {
+                // Non-JSON-RPC log line — ignore.
+                continue
+            }
+            const p = msg.id !== undefined ? pending.get(msg.id) : undefined
+            if (p) {
+                clearTimeout(p.timeout)
+                pending.delete(msg.id)
+                p.resolve(msg)
+            }
+        }
+    })
+
+    const initResp = await send("initialize", {
+        protocolVersion: "2024-11-05",
+        capabilities: {},
+        clientInfo: { name: "wiring-test", version: "0.0.0" },
+    })
+    expect(initResp.error, JSON.stringify(initResp.error)).toBeUndefined()
+    expect(initResp.result?.serverInfo?.name).toBeTruthy()
+    await send("notifications/initialized", {}, true)
+}, 30000)
+
+afterAll(() => {
+    proc?.kill("SIGTERM")
+})
+
+describe("MCP server wiring", () => {
+    it("registers all nine multi-page tools", async () => {
+        const resp = await send("tools/list", {})
+        expect(resp.error, JSON.stringify(resp.error)).toBeUndefined()
+        const names: string[] = (resp.result?.tools ?? []).map(
+            (t: { name: string }) => t.name,
+        )
+        for (const expected of EXPECTED_TOOLS) {
+            expect(names, `missing tool: ${expected}`).toContain(expected)
+        }
+    })
+
+    it("advertises page-selector params on edit_diagram", async () => {
+        const resp = await send("tools/list", {})
+        const edit = resp.result.tools.find(
+            (t: { name: string }) => t.name === "edit_diagram",
+        )
+        const props = edit?.inputSchema?.properties ?? {}
+        expect(props.page_id).toBeTruthy()
+        expect(props.page_name).toBeTruthy()
+        expect(props.page_index).toBeTruthy()
+    })
+
+    it("advertises name/id/xml on add_page", async () => {
+        const resp = await send("tools/list", {})
+        const addPage = resp.result.tools.find(
+            (t: { name: string }) => t.name === "add_page",
+        )
+        const props = addPage?.inputSchema?.properties ?? {}
+        expect(props.name).toBeTruthy()
+        expect(props.id).toBeTruthy()
+        expect(props.xml).toBeTruthy()
+    })
+})

packages/mcp-server/vitest.config.ts

@@ -0,0 +1,11 @@
+import { defineConfig } from "vitest/config"
+
+export default defineConfig({
+    test: {
+        include: ["tests/**/*.test.ts"],
+        environment: "node",
+        // The package source uses Node16 module resolution with explicit .js
+        // extensions in imports. Vitest+esbuild handles the .ts→.js mapping
+        // transparently, so no extra alias config is needed.
+    },
+})

public/atlas-cloud-logo-white.svg

@@ -0,0 +1,12 @@
+<svg width="163" height="26" viewBox="0 0 163 26" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path d="M32.9477 25.7973C30.9997 25.7973 29.4796 25.2568 28.3986 24.1871C27.3176 23.1174 26.7771 21.6085 26.7771 19.6492V12.0148H23.8157V8.28764H24.131C24.9755 8.28764 25.6286 8.06243 26.0902 7.62328C26.5407 7.17287 26.7771 6.53104 26.7771 5.68652V4.34655H30.9772V8.28764H34.9521V12.0148H30.9772V19.4353C30.9772 20.0095 31.0785 20.4937 31.2812 20.8991C31.4839 21.3045 31.7992 21.6085 32.2383 21.8224C32.6775 22.0364 33.2292 22.1377 33.9049 22.1377C34.0512 22.1377 34.2314 22.1377 34.4341 22.104C34.6368 22.0814 34.8282 22.0589 35.0196 22.0364V25.6059C34.7269 25.6509 34.3778 25.696 34.0062 25.7297C33.6233 25.7748 33.2743 25.7973 32.959 25.7973H32.9477Z" fill="#FAF7F8"/>
+<path d="M36.5734 25.6059V1.52026H40.7734V25.6059H36.5734Z" fill="#FAF7F8"/>
+<path d="M48.284 25.9887C47.0792 25.9887 46.0207 25.7861 45.1199 25.3807C44.219 24.9753 43.5209 24.401 43.0367 23.6466C42.5525 22.8922 42.3048 22.0139 42.3048 21.023C42.3048 20.0321 42.5188 19.2101 42.9579 18.4556C43.3971 17.7012 44.0501 17.0706 44.951 16.5639C45.8405 16.0572 46.9665 15.6969 48.329 15.4829L53.9592 14.5596V17.7462L49.1173 18.602C48.2953 18.7484 47.6759 19.0074 47.2706 19.379C46.8652 19.7506 46.6625 20.246 46.6625 20.8541C46.6625 21.4621 46.8877 21.9238 47.3494 22.2729C47.7998 22.6219 48.3741 22.8021 49.0497 22.8021C49.9167 22.8021 50.6937 22.6219 51.358 22.2503C52.0224 21.8787 52.5404 21.3608 52.9007 20.7077C53.261 20.0546 53.4412 19.3339 53.4412 18.5795V14.0867C53.4412 13.3435 53.1597 12.7242 52.5854 12.2287C52.0111 11.7333 51.2454 11.4855 50.2996 11.4855C49.41 11.4855 48.6218 11.7333 47.9237 12.2175C47.2368 12.7017 46.7301 13.3322 46.4148 14.0979L43.0142 12.4427C43.352 11.5306 43.8925 10.7424 44.6244 10.0668C45.3563 9.39114 46.2234 8.87317 47.2143 8.49032C48.2164 8.10748 49.2974 7.91605 50.4572 7.91605C51.876 7.91605 53.1259 8.17504 54.2069 8.69301C55.2879 9.21098 56.1324 9.94289 56.7404 10.8775C57.3485 11.8121 57.6525 12.8818 57.6525 14.0867V25.6059H53.7114V22.6444L54.601 22.6107C54.1506 23.3313 53.6214 23.9506 52.9908 24.4573C52.3602 24.9641 51.6621 25.3469 50.8851 25.6059C50.1082 25.8649 49.2411 25.9887 48.2953 25.9887H48.284Z" fill="#FAF7F8"/>
+<path d="M66.4804 25.9887C64.6337 25.9887 63.0235 25.5496 61.661 24.6713C60.2872 23.793 59.3414 22.5994 58.8121 21.0905L61.965 19.5929C62.4154 20.5726 63.0347 21.3383 63.8229 21.89C64.6224 22.4418 65.5007 22.712 66.4804 22.712C67.2235 22.712 67.8203 22.5431 68.2595 22.2053C68.7099 21.8675 68.9238 21.4171 68.9238 20.8653C68.9238 20.5275 68.8338 20.246 68.6536 20.0208C68.4734 19.7956 68.237 19.6042 67.9329 19.4465C67.6402 19.2889 67.2911 19.1538 66.9195 19.0524L64.0819 18.253C62.6406 17.8476 61.5371 17.2058 60.7827 16.3275C60.0282 15.4492 59.6566 14.4132 59.6566 13.2196C59.6566 12.1612 59.9269 11.2266 60.4674 10.4383C61.0079 9.65013 61.7623 9.01955 62.7307 8.58041C63.6991 8.13 64.8026 7.91605 66.0525 7.91605C67.6852 7.91605 69.1265 8.31016 70.3764 9.09838C71.6263 9.88659 72.5159 10.9901 73.0451 12.4089L69.8584 13.9065C69.5657 13.1183 69.059 12.499 68.3608 12.0486C67.6627 11.5982 66.8745 11.3617 66.0074 11.3617C65.3093 11.3617 64.7575 11.5193 64.3522 11.8234C63.9468 12.1274 63.7441 12.5553 63.7441 13.0845C63.7441 13.3773 63.8342 13.6475 64.0031 13.884C64.172 14.1204 64.4085 14.3119 64.7238 14.4583C65.0278 14.6046 65.3881 14.7398 65.7935 14.8749L68.5635 15.6969C69.9823 16.1248 71.0858 16.7553 71.8628 17.6111C72.6397 18.4556 73.0226 19.5028 73.0226 20.7302C73.0226 21.7661 72.7411 22.6895 72.2006 23.4777C71.6488 24.2772 70.8831 24.8965 69.9147 25.3356C68.9351 25.7861 67.7978 26 66.4804 26V25.9887Z" fill="#FAF7F8"/>
+<path d="M90.2283 25.9889C88.528 25.9889 86.9628 25.6849 85.5215 25.0656C84.0802 24.4463 82.8303 23.5905 81.7718 22.487C80.7134 21.3835 79.8801 20.0886 79.2721 18.6022C78.664 17.1159 78.36 15.4944 78.36 13.7378C78.36 11.9812 78.6527 10.3484 79.2495 8.85083C79.8463 7.35322 80.6796 6.05829 81.7493 4.96605C82.819 3.8738 84.0689 3.02929 85.499 2.42123C86.929 1.81318 88.5055 1.50915 90.2283 1.50915C91.9511 1.50915 93.4487 1.79066 94.8 2.36493C96.1512 2.9392 97.2885 3.69364 98.2231 4.6395C99.1577 5.58536 99.822 6.6213 100.227 7.74733L96.3426 9.59401C95.8922 8.38916 95.149 7.39826 94.0793 6.6213C93.0208 5.84435 91.7372 5.4615 90.2283 5.4615C88.7194 5.4615 87.4357 5.81057 86.2985 6.5087C85.1612 7.20684 84.2829 8.17522 83.6523 9.40258C83.0217 10.63 82.7177 12.0713 82.7177 13.7265C82.7177 15.3818 83.033 16.8343 83.6523 18.073C84.2829 19.3116 85.1612 20.28 86.2985 20.9894C87.4357 21.6875 88.7419 22.0366 90.2283 22.0366C91.7146 22.0366 93.0208 21.6537 94.0793 20.8768C95.1378 20.0998 95.8922 19.1202 96.3426 17.9378L100.227 19.7507C99.822 20.8768 99.1577 21.9127 98.2231 22.8586C97.2885 23.8044 96.1512 24.5589 94.8 25.1331C93.4487 25.7074 91.9286 25.9889 90.2283 25.9889Z" fill="#FAF7F8"/>
+<path d="M101.748 25.6059V1.52026H105.948V25.6059H101.748Z" fill="#FAF7F8"/>
+<path d="M116.645 25.9884C114.967 25.9884 113.436 25.5943 112.051 24.806C110.666 24.0178 109.551 22.9481 108.729 21.5969C107.907 20.2344 107.49 18.6917 107.49 16.9464C107.49 15.2011 107.907 13.6584 108.729 12.2959C109.551 10.9334 110.655 9.86369 112.04 9.08674C113.413 8.29852 114.956 7.90441 116.656 7.90441C118.357 7.90441 119.922 8.29852 121.307 9.08674C122.681 9.87495 123.784 10.9334 124.606 12.2846C125.417 13.6359 125.833 15.1898 125.833 16.9464C125.833 18.703 125.417 20.2344 124.595 21.5969C123.773 22.9594 122.669 24.0291 121.284 24.806C119.911 25.5943 118.368 25.9884 116.668 25.9884H116.645ZM116.645 22.1711C117.602 22.1711 118.435 21.9459 119.145 21.5068C119.854 21.0564 120.417 20.4371 120.834 19.6488C121.25 18.8494 121.453 17.9598 121.453 16.9576C121.453 15.9555 121.25 15.0659 120.834 14.289C120.417 13.5008 119.854 12.8927 119.145 12.4423C118.435 11.9919 117.602 11.7779 116.645 11.7779C115.688 11.7779 114.888 12.0031 114.168 12.4423C113.447 12.8927 112.884 13.5008 112.467 14.289C112.051 15.0772 111.848 15.9667 111.848 16.9576C111.848 17.9485 112.051 18.8494 112.467 19.6488C112.884 20.4483 113.447 21.0676 114.168 21.5068C114.888 21.9572 115.722 22.1711 116.645 22.1711Z" fill="#FAF7F8"/>
+<path d="M133.535 25.9883C132.173 25.9883 131.013 25.6956 130.033 25.0988C129.054 24.502 128.299 23.68 127.77 22.6215C127.241 21.5631 126.97 20.3244 126.97 18.8944V8.2985H131.171V18.5453C131.171 19.266 131.317 19.8965 131.598 20.437C131.88 20.9775 132.297 21.4054 132.837 21.7094C133.378 22.0135 133.986 22.1711 134.672 22.1711C135.359 22.1711 135.956 22.0135 136.485 21.7094C137.015 21.4054 137.431 20.9775 137.724 20.4258C138.017 19.874 138.174 19.2209 138.174 18.4552V8.2985H142.341V25.6055H138.4V22.2049L138.715 22.8129C138.31 23.8714 137.656 24.6709 136.744 25.2001C135.832 25.7294 134.763 25.9996 133.535 25.9996V25.9883Z" fill="#FAF7F8"/>
+<path d="M152.7 25.9888C151.022 25.9888 149.525 25.5947 148.196 24.7952C146.867 23.9957 145.82 22.9147 145.066 21.5297C144.3 20.156 143.917 18.6246 143.917 16.9468C143.917 15.269 144.3 13.7264 145.077 12.3639C145.854 11.0014 146.901 9.9204 148.207 9.12093C149.525 8.31019 151.011 7.91608 152.666 7.91608C153.984 7.91608 155.155 8.17506 156.179 8.69304C157.204 9.21101 158.015 9.94292 158.612 10.8775L157.97 11.7333V1.52026H162.136V25.6059H158.195V22.2616L158.645 23.0836C158.049 24.0407 157.227 24.7614 156.168 25.2456C155.11 25.7298 153.95 25.9775 152.7 25.9775V25.9888ZM153.139 22.1715C154.074 22.1715 154.907 21.9463 155.639 21.5072C156.371 21.0568 156.945 20.4487 157.362 19.6605C157.778 18.8723 157.981 17.9715 157.981 16.9581C157.981 15.9446 157.778 15.0663 157.362 14.2894C156.945 13.5012 156.371 12.8931 155.639 12.4427C154.907 11.9923 154.074 11.7783 153.139 11.7783C152.205 11.7783 151.371 12.0035 150.628 12.4427C149.885 12.8931 149.311 13.5012 148.894 14.2894C148.477 15.0776 148.275 15.9672 148.275 16.9581C148.275 17.949 148.477 18.8836 148.894 19.6605C149.311 20.4487 149.885 21.0568 150.628 21.5072C151.371 21.9576 152.205 22.1715 153.139 22.1715Z" fill="#FAF7F8"/>
+<path d="M13.4447 0L0 25.9886C6.22692 23.5226 11.249 23.1623 15.7643 23.3763L13.7037 18.8159C12.8029 18.7258 10.1905 18.7258 8.9519 19.0523L13.4447 9.06449C13.4447 9.06449 20.2009 23.7366 20.2121 23.7366C21.5183 23.9393 24.9977 25.1103 26.8895 25.9886L13.4447 0Z" fill="#FAF7F8"/>
+</svg>

public/atlas-cloud-logo.svg

@@ -0,0 +1,12 @@
+<svg width="163" height="26" viewBox="0 0 163 26" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path d="M32.9475 25.7973C30.9995 25.7973 29.4793 25.2568 28.3984 24.1871C27.3174 23.1174 26.7769 21.6085 26.7769 19.6492V12.0148H23.8154V8.28766H24.1307C24.9752 8.28766 25.6283 8.06245 26.09 7.6233C26.5404 7.17289 26.7769 6.53106 26.7769 5.68654V4.34657H30.9769V8.28766H34.9518V12.0148H30.9769V19.4353C30.9769 20.0096 31.0783 20.4938 31.281 20.8991C31.4837 21.3045 31.7989 21.6085 32.2381 21.8225C32.6772 22.0364 33.229 22.1378 33.9046 22.1378C34.051 22.1378 34.2312 22.1378 34.4338 22.104C34.6365 22.0814 34.828 22.0589 35.0194 22.0364V25.6059C34.7266 25.6509 34.3775 25.696 34.006 25.7298C33.6231 25.7748 33.274 25.7973 32.9588 25.7973H32.9475Z" fill="#0F1111"/>
+<path d="M36.5732 25.6059V1.52028H40.7733V25.6059H36.5732Z" fill="#0F1111"/>
+<path d="M48.2839 25.9888C47.079 25.9888 46.0206 25.7861 45.1197 25.3807C44.2189 24.9753 43.5208 24.4011 43.0366 23.6466C42.5524 22.8922 42.3047 22.0139 42.3047 21.023C42.3047 20.0321 42.5186 19.2101 42.9578 18.4557C43.3969 17.7012 44.05 17.0706 44.9508 16.5639C45.8404 16.0572 46.9664 15.6969 48.3289 15.483L53.959 14.5596V17.7463L49.1171 18.602C48.2951 18.7484 47.6758 19.0074 47.2705 19.379C46.8651 19.7506 46.6624 20.246 46.6624 20.8541C46.6624 21.4621 46.8876 21.9238 47.3493 22.2729C47.7997 22.6219 48.374 22.8021 49.0496 22.8021C49.9166 22.8021 50.6936 22.6219 51.3579 22.2504C52.0223 21.8788 52.5403 21.3608 52.9006 20.7077C53.2609 20.0546 53.4411 19.334 53.4411 18.5795V14.0867C53.4411 13.3435 53.1596 12.7242 52.5853 12.2287C52.011 11.7333 51.2453 11.4856 50.2995 11.4856C49.4099 11.4856 48.6217 11.7333 47.9236 12.2175C47.2367 12.7017 46.73 13.3322 46.4147 14.0979L43.0141 12.4427C43.3519 11.5306 43.8924 10.7424 44.6243 10.0668C45.3562 9.39116 46.2233 8.87319 47.2142 8.49034C48.2163 8.10749 49.2973 7.91607 50.4571 7.91607C51.8759 7.91607 53.1258 8.17505 54.2068 8.69303C55.2878 9.211 56.1323 9.94291 56.7403 10.8775C57.3484 11.8121 57.6524 12.8818 57.6524 14.0867V25.6059H53.7113V22.6445L54.6009 22.6107C54.1505 23.3313 53.6212 23.9507 52.9907 24.4574C52.3601 24.9641 51.662 25.3469 50.885 25.6059C50.108 25.8649 49.241 25.9888 48.2951 25.9888H48.2839Z" fill="#0F1111"/>
+<path d="M66.4802 25.9888C64.6336 25.9888 63.0233 25.5496 61.6609 24.6713C60.2871 23.793 59.3412 22.5994 58.812 21.0906L61.9649 19.5929C62.4153 20.5726 63.0346 21.3383 63.8228 21.89C64.6223 22.4418 65.5006 22.712 66.4802 22.712C67.2234 22.712 67.8202 22.5431 68.2594 22.2053C68.7098 21.8675 68.9237 21.4171 68.9237 20.8653C68.9237 20.5275 68.8336 20.246 68.6535 20.0208C68.4733 19.7956 68.2368 19.6042 67.9328 19.4466C67.64 19.2889 67.291 19.1538 66.9194 19.0524L64.0818 18.253C62.6405 17.8476 61.537 17.2058 60.7826 16.3275C60.0281 15.4492 59.6565 14.4132 59.6565 13.2196C59.6565 12.1612 59.9268 11.2266 60.4673 10.4384C61.0078 9.65015 61.7622 9.01957 62.7306 8.58042C63.699 8.13001 64.8025 7.91607 66.0524 7.91607C67.6851 7.91607 69.1264 8.31018 70.3763 9.09839C71.6262 9.88661 72.5157 10.9901 73.045 12.4089L69.8583 13.9065C69.5656 13.1183 69.0588 12.499 68.3607 12.0486C67.6626 11.5982 66.8743 11.3617 66.0073 11.3617C65.3092 11.3617 64.7574 11.5193 64.3521 11.8234C63.9467 12.1274 63.744 12.5553 63.744 13.0845C63.744 13.3773 63.8341 13.6475 64.003 13.884C64.1719 14.1205 64.4084 14.3119 64.7236 14.4583C65.0277 14.6047 65.388 14.7398 65.7934 14.8749L68.5634 15.6969C69.9822 16.1248 71.0857 16.7554 71.8626 17.6111C72.6396 18.4557 73.0224 19.5029 73.0224 20.7302C73.0224 21.7662 72.7409 22.6895 72.2005 23.4777C71.6487 24.2772 70.883 24.8965 69.9146 25.3357C68.935 25.7861 67.7977 26 66.4802 26V25.9888Z" fill="#0F1111"/>
+<path d="M90.2282 25.9889C88.5279 25.9889 86.9627 25.6849 85.5214 25.0656C84.0801 24.4463 82.8302 23.5905 81.7717 22.487C80.7133 21.3835 79.88 20.0886 79.2719 18.6022C78.6639 17.1159 78.3599 15.4944 78.3599 13.7378C78.3599 11.9812 78.6526 10.3485 79.2494 8.85085C79.8462 7.35324 80.6795 6.05831 81.7492 4.96606C82.8189 3.87382 84.0688 3.0293 85.4989 2.42125C86.9289 1.8132 88.5053 1.50917 90.2282 1.50917C91.951 1.50917 93.4486 1.79068 94.7998 2.36495C96.1511 2.93922 97.2884 3.69366 98.223 4.63952C99.1576 5.58538 99.8219 6.62132 100.227 7.74735L96.3425 9.59403C95.8921 8.38918 95.1489 7.39828 94.0792 6.62132C93.0207 5.84436 91.737 5.46152 90.2282 5.46152C88.7193 5.46152 87.4356 5.81058 86.2983 6.50872C85.1611 7.20685 84.2828 8.17523 83.6522 9.4026C83.0216 10.63 82.7176 12.0713 82.7176 13.7265C82.7176 15.3818 83.0329 16.8344 83.6522 18.073C84.2828 19.3116 85.1611 20.28 86.2983 20.9894C87.4356 21.6875 88.7418 22.0366 90.2282 22.0366C91.7145 22.0366 93.0207 21.6537 94.0792 20.8768C95.1376 20.0998 95.8921 19.1202 96.3425 17.9379L100.227 19.7508C99.8219 20.8768 99.1576 21.9127 98.223 22.8586C97.2884 23.8045 96.1511 24.5589 94.7998 25.1332C93.4486 25.7074 91.9285 25.9889 90.2282 25.9889Z" fill="#0F1111"/>
+<path d="M101.748 25.6059V1.52028H105.948V25.6059H101.748Z" fill="#0F1111"/>
+<path d="M116.645 25.9884C114.968 25.9884 113.436 25.5943 112.051 24.8061C110.666 24.0178 109.551 22.9481 108.729 21.5969C107.907 20.2344 107.491 18.6917 107.491 16.9464C107.491 15.2011 107.907 13.6584 108.729 12.2959C109.551 10.9334 110.655 9.86371 112.04 9.08676C113.414 8.29854 114.956 7.90443 116.657 7.90443C118.357 7.90443 119.922 8.29854 121.307 9.08676C122.681 9.87497 123.784 10.9334 124.606 12.2847C125.417 13.6359 125.834 15.1898 125.834 16.9464C125.834 18.703 125.417 20.2344 124.595 21.5969C123.773 22.9594 122.67 24.0291 121.285 24.8061C119.911 25.5943 118.368 25.9884 116.668 25.9884H116.645ZM116.645 22.1712C117.602 22.1712 118.436 21.946 119.145 21.5068C119.854 21.0564 120.417 20.4371 120.834 19.6489C121.251 18.8494 121.453 17.9598 121.453 16.9577C121.453 15.9555 121.251 15.0659 120.834 14.289C120.417 13.5008 119.854 12.8927 119.145 12.4423C118.436 11.9919 117.602 11.778 116.645 11.778C115.688 11.778 114.889 12.0032 114.168 12.4423C113.447 12.8927 112.884 13.5008 112.468 14.289C112.051 15.0772 111.848 15.9668 111.848 16.9577C111.848 17.9486 112.051 18.8494 112.468 19.6489C112.884 20.4483 113.447 21.0677 114.168 21.5068C114.889 21.9572 115.722 22.1712 116.645 22.1712Z" fill="#0F1111"/>
+<path d="M133.535 25.9884C132.172 25.9884 131.013 25.6956 130.033 25.0988C129.053 24.502 128.299 23.68 127.77 22.6215C127.24 21.5631 126.97 20.3245 126.97 18.8944V8.29852H131.17V18.5453C131.17 19.266 131.317 19.8966 131.598 20.4371C131.88 20.9775 132.296 21.4054 132.837 21.7095C133.377 22.0135 133.985 22.1711 134.672 22.1711C135.359 22.1711 135.956 22.0135 136.485 21.7095C137.014 21.4054 137.431 20.9775 137.724 20.4258C138.017 19.874 138.174 19.221 138.174 18.4553V8.29852H142.34V25.6055H138.399V22.2049L138.715 22.813C138.309 23.8714 137.656 24.6709 136.744 25.2001C135.832 25.7294 134.762 25.9996 133.535 25.9996V25.9884Z" fill="#0F1111"/>
+<path d="M152.7 25.9888C151.022 25.9888 149.525 25.5947 148.196 24.7952C146.867 23.9957 145.82 22.9147 145.066 21.5297C144.3 20.156 143.917 18.6246 143.917 16.9468C143.917 15.269 144.3 13.7264 145.077 12.3639C145.854 11.0014 146.901 9.92042 148.207 9.12094C149.525 8.31021 151.011 7.9161 152.666 7.9161C153.984 7.9161 155.155 8.17508 156.179 8.69305C157.204 9.21103 158.015 9.94294 158.612 10.8775L157.97 11.7333V1.52028H162.136V25.6059H158.195V22.2616L158.645 23.0836C158.049 24.0408 157.227 24.7614 156.168 25.2456C155.11 25.7298 153.95 25.9775 152.7 25.9775V25.9888ZM153.139 22.1716C154.074 22.1716 154.907 21.9464 155.639 21.5072C156.371 21.0568 156.945 20.4487 157.362 19.6605C157.778 18.8723 157.981 17.9715 157.981 16.9581C157.981 15.9447 157.778 15.0664 157.362 14.2894C156.945 13.5012 156.371 12.8931 155.639 12.4427C154.907 11.9923 154.074 11.7784 153.139 11.7784C152.205 11.7784 151.371 12.0036 150.628 12.4427C149.885 12.8931 149.311 13.5012 148.894 14.2894C148.477 15.0776 148.275 15.9672 148.275 16.9581C148.275 17.949 148.477 18.8836 148.894 19.6605C149.311 20.4487 149.885 21.0568 150.628 21.5072C151.371 21.9576 152.205 22.1716 153.139 22.1716Z" fill="#0F1111"/>
+<path d="M13.4447 1.71661e-05L0 25.9887C6.22692 23.5227 11.249 23.1623 15.7643 23.3763L13.7037 18.8159C12.8029 18.7258 10.1905 18.7258 8.9519 19.0523L13.4447 9.06451C13.4447 9.06451 20.2009 23.7366 20.2121 23.7366C21.5183 23.9393 24.9977 25.1104 26.8895 25.9887L13.4447 1.71661e-05Z" fill="#0F1111"/>
+</svg>

tests/e2e/iframe-interaction.spec.ts

@@ -35,8 +35,10 @@ test.describe("Iframe Interaction", () => {
         await expect(
             frame
                 .locator('text="Diagram"')
-                .or(frame.locator('[title*="Diagram"]')),
-        ).toBeVisible({ timeout: 10000 })
+                .or(frame.locator('[title*="Diagram"]'))
+                .filter({ visible: true })
+                .first(),
+        ).toBeVisible({ timeout: 30000 })
     })
 
     test("diagram XML is rendered in iframe after generation", async ({

tests/e2e/settings.spec.ts

@@ -18,6 +18,26 @@ test.describe("Settings", () => {
         await expect(dialog.locator('text="English"')).toBeVisible()
     })
 
+    test("max output tokens is editable and persists", async ({ page }) => {
+        await openSettings(page)
+
+        const input = page.locator("#max-output-tokens")
+        await expect(input).toBeVisible()
+
+        await input.fill("48000")
+        await expect
+            .poll(() =>
+                page.evaluate(() =>
+                    localStorage.getItem("next-ai-draw-io-max-output-tokens"),
+                ),
+            )
+            .toBe("48000")
+
+        // Non-digits are dropped so the header always carries a plain number
+        await input.fill("12k000")
+        await expect(input).toHaveValue("12000")
+    })
+
     test("draw.io theme toggle exists", async ({ page }) => {
         await openSettings(page)
 

tests/unit/admin-providers.test.ts

@@ -0,0 +1,398 @@
+import fs from "fs"
+import os from "os"
+import path from "path"
+import { afterEach, beforeEach, describe, expect, it } from "vitest"
+import {
+    ADMIN_PROVIDERS_KEY,
+    adminProvidersToConfig,
+    deriveEnvUpdates,
+    loadAdminProviders,
+    maskAdminProviders,
+    mergeSecrets,
+    type StoredAdminProvider,
+    validateAdminProviders,
+} from "@/lib/admin/providers"
+import { _resetForTests, saveSettings } from "@/lib/admin/settings"
+import { loadRawServerModelsConfig } from "@/lib/server-model-config"
+
+let tmpDir: string
+
+beforeEach(() => {
+    tmpDir = fs.mkdtempSync(path.join(os.tmpdir(), "admin-providers-"))
+    process.env.SETTINGS_FILE = path.join(tmpDir, "settings.json")
+    _resetForTests()
+})
+
+afterEach(() => {
+    _resetForTests()
+    delete process.env.SETTINGS_FILE
+    delete process.env.AI_MODELS_CONFIG
+    fs.rmSync(tmpDir, { recursive: true, force: true })
+})
+
+function provider(
+    overrides: Partial<StoredAdminProvider> = {},
+): StoredAdminProvider {
+    return {
+        id: "p1",
+        provider: "openai",
+        apiKey: "sk-test",
+        models: ["gpt-5.2"],
+        ...overrides,
+    }
+}
+
+describe("deriveEnvUpdates", () => {
+    it("writes credentials to ADMIN_-prefixed env vars (never shadows standard vars)", () => {
+        const updates = deriveEnvUpdates([provider()], [])
+        expect(updates.ADMIN_OPENAI_API_KEY).toBe("sk-test")
+        expect(updates.OPENAI_API_KEY).toBeUndefined()
+        expect(JSON.parse(updates.ADMIN_PROVIDERS as string)).toHaveLength(1)
+        // AI_MODELS_CONFIG is no longer written (merged at read time)
+        expect(updates.AI_MODELS_CONFIG).toBeNull()
+    })
+
+    it("suffixes env vars for a second instance of the same provider", () => {
+        const updates = deriveEnvUpdates(
+            [
+                provider({ id: "p1", name: "First" }),
+                provider({
+                    id: "p2",
+                    name: "Second",
+                    apiKey: "sk-second",
+                    models: ["gpt-5-mini"],
+                }),
+            ],
+            [],
+        )
+        expect(updates.ADMIN_OPENAI_API_KEY).toBe("sk-test")
+        expect(updates.ADMIN_OPENAI_API_KEY_2).toBe("sk-second")
+    })
+
+    it("maps bedrock credentials to AWS env vars", () => {
+        const updates = deriveEnvUpdates(
+            [
+                provider({
+                    provider: "bedrock",
+                    apiKey: undefined,
+                    awsAccessKeyId: "AKIA123",
+                    awsSecretAccessKey: "secret",
+                    awsRegion: "us-west-2",
+                    models: ["claude-x"],
+                }),
+            ],
+            [],
+        )
+        expect(updates.AWS_ACCESS_KEY_ID).toBe("AKIA123")
+        expect(updates.AWS_SECRET_ACCESS_KEY).toBe("secret")
+        expect(updates.AWS_REGION).toBe("us-west-2")
+    })
+
+    it("clears keys owned by the previous list when providers are removed", () => {
+        const prev = [provider()]
+        const updates = deriveEnvUpdates([], prev)
+        expect(updates.ADMIN_OPENAI_API_KEY).toBeNull()
+        expect(updates.AI_MODELS_CONFIG).toBeNull()
+        expect(updates.ADMIN_PROVIDERS).toBeNull()
+    })
+
+    it("sets AI_PROVIDER/AI_MODEL only when a default is flagged", () => {
+        const noDefault = deriveEnvUpdates([provider()], [])
+        expect(noDefault.AI_PROVIDER).toBeNull()
+        expect(noDefault.AI_MODEL).toBeNull()
+
+        const updates = deriveEnvUpdates(
+            [
+                provider({ id: "p1" }),
+                provider({
+                    id: "p2",
+                    provider: "deepseek",
+                    models: ["deepseek-chat"],
+                    isDefault: true,
+                }),
+            ],
+            [],
+        )
+        expect(updates.AI_PROVIDER).toBe("deepseek")
+        expect(updates.AI_MODEL).toBe("deepseek-chat")
+    })
+})
+
+describe("adminProvidersToConfig", () => {
+    it("builds a config with ADMIN_-prefixed apiKeyEnv wiring", () => {
+        const config = adminProvidersToConfig([provider()])
+        expect(config.providers).toHaveLength(1)
+        expect(config.providers[0].models).toEqual(["gpt-5.2"])
+        expect(config.providers[0].apiKeyEnv).toBe("ADMIN_OPENAI_API_KEY")
+    })
+
+    it("wires suffixed env vars for a second instance", () => {
+        const config = adminProvidersToConfig([
+            provider({ id: "p1", name: "First" }),
+            provider({
+                id: "p2",
+                name: "Second",
+                apiKey: "sk-second",
+                models: ["gpt-5-mini"],
+            }),
+        ])
+        expect(config.providers[1].apiKeyEnv).toBe("ADMIN_OPENAI_API_KEY_2")
+    })
+
+    it("skips providers without models and carries the default flag", () => {
+        const config = adminProvidersToConfig([
+            provider({ id: "p1", models: [] }),
+            provider({ id: "p2", name: "D", isDefault: true }),
+        ])
+        expect(config.providers).toHaveLength(1)
+        expect(config.providers[0].default).toBe(true)
+    })
+})
+
+describe("mergeSecrets", () => {
+    it("keeps stored secret when client sends an isSet marker", () => {
+        const stored = [provider({ apiKey: "sk-original" })]
+        const merged = mergeSecrets(
+            [
+                {
+                    ...provider(),
+                    apiKey: { isSet: true, hint: "…test" },
+                },
+            ],
+            stored,
+        )
+        expect(merged[0].apiKey).toBe("sk-original")
+    })
+
+    it("replaces secret when client sends a plaintext string", () => {
+        const stored = [provider({ apiKey: "sk-original" })]
+        const merged = mergeSecrets(
+            [{ ...provider(), apiKey: "sk-new" }],
+            stored,
+        )
+        expect(merged[0].apiKey).toBe("sk-new")
+    })
+
+    it("clears secret when client sends undefined", () => {
+        const stored = [provider({ apiKey: "sk-original" })]
+        const merged = mergeSecrets(
+            [{ ...provider(), apiKey: undefined }],
+            stored,
+        )
+        expect(merged[0].apiKey).toBeUndefined()
+    })
+})
+
+describe("loadRawServerModelsConfig merge", () => {
+    it("combines env AI_MODELS_CONFIG with panel providers", async () => {
+        process.env.AI_MODELS_CONFIG = JSON.stringify({
+            providers: [
+                {
+                    name: "Env OpenAI",
+                    provider: "openai",
+                    models: ["gpt-from-env"],
+                    default: true,
+                },
+            ],
+        })
+        saveSettings(deriveEnvUpdates([provider({ name: "Panel" })], []))
+
+        const merged = await loadRawServerModelsConfig()
+        expect(merged?.providers.map((p) => p.name)).toEqual([
+            "Env OpenAI",
+            "Panel",
+        ])
+        // Env default kept because panel set none
+        expect(merged?.providers[0].default).toBe(true)
+    })
+
+    it("panel default overrides the env default", async () => {
+        process.env.AI_MODELS_CONFIG = JSON.stringify({
+            providers: [
+                {
+                    name: "Env OpenAI",
+                    provider: "openai",
+                    models: ["gpt-from-env"],
+                    default: true,
+                },
+            ],
+        })
+        saveSettings(
+            deriveEnvUpdates(
+                [provider({ name: "Panel", isDefault: true })],
+                [],
+            ),
+        )
+
+        const merged = await loadRawServerModelsConfig()
+        expect(merged?.providers[0].default).toBeFalsy()
+        expect(merged?.providers[1].default).toBe(true)
+    })
+
+    it("returns only env config when the panel has no providers", async () => {
+        process.env.AI_MODELS_CONFIG = JSON.stringify({
+            providers: [
+                {
+                    name: "Env Only",
+                    provider: "openai",
+                    models: ["gpt-from-env"],
+                },
+            ],
+        })
+        const merged = await loadRawServerModelsConfig()
+        expect(merged?.providers.map((p) => p.name)).toEqual(["Env Only"])
+    })
+})
+
+describe("validateAdminProviders", () => {
+    it("rejects names clashing with env-configured providers", () => {
+        expect(
+            validateAdminProviders([provider({ name: "Env OpenAI" })], {
+                providers: [
+                    {
+                        name: "Env OpenAI",
+                        provider: "openai",
+                        models: ["gpt-x"],
+                    },
+                ],
+            }),
+        ).toMatch(/already defined/)
+    })
+
+    it("rejects a global-credential provider already in the env config", () => {
+        expect(
+            validateAdminProviders(
+                [
+                    provider({
+                        provider: "bedrock",
+                        apiKey: undefined,
+                        awsAccessKeyId: "AKIA-panel",
+                        awsSecretAccessKey: "panel-secret",
+                        awsRegion: "us-east-1",
+                        models: ["claude-x"],
+                    }),
+                ],
+                {
+                    providers: [
+                        {
+                            name: "Env Bedrock",
+                            provider: "bedrock",
+                            models: ["claude-env"],
+                        },
+                    ],
+                },
+            ),
+        ).toMatch(/shares global credentials/)
+    })
+
+    it("allows a normal provider type alongside the same env type", () => {
+        expect(
+            validateAdminProviders([provider({ name: "Panel OpenAI" })], {
+                providers: [
+                    {
+                        name: "Env OpenAI",
+                        provider: "openai",
+                        models: ["gpt-x"],
+                    },
+                ],
+            }),
+        ).toBeNull()
+    })
+
+    it("rejects two bedrock instances", () => {
+        const list = [
+            provider({ id: "p1", provider: "bedrock" }),
+            provider({ id: "p2", provider: "bedrock" }),
+        ]
+        expect(validateAdminProviders(list)).toMatch(/Only one/)
+    })
+
+    it("rejects duplicate display names", () => {
+        const list = [
+            provider({ id: "p1", name: "Same" }),
+            provider({ id: "p2", name: "Same" }),
+        ]
+        expect(validateAdminProviders(list)).toMatch(/unique/)
+    })
+
+    it("rejects multiple defaults", () => {
+        const list = [
+            provider({ id: "p1", isDefault: true }),
+            provider({ id: "p2", name: "Other", isDefault: true }),
+        ]
+        expect(validateAdminProviders(list)).toMatch(/default/)
+    })
+
+    it("accepts a valid list", () => {
+        const list = [
+            provider({ id: "p1", isDefault: true }),
+            provider({ id: "p2", name: "Backup" }),
+        ]
+        expect(validateAdminProviders(list)).toBeNull()
+    })
+})
+
+describe("loadAdminProviders", () => {
+    it("returns [] when nothing is stored", () => {
+        expect(loadAdminProviders()).toEqual([])
+    })
+
+    it("loads valid stored providers", () => {
+        saveSettings({ [ADMIN_PROVIDERS_KEY]: JSON.stringify([provider()]) })
+        expect(loadAdminProviders()).toHaveLength(1)
+    })
+
+    it("round-trips a bedrock provider with multiple string secrets", () => {
+        const bedrock = provider({
+            provider: "bedrock",
+            apiKey: undefined,
+            awsAccessKeyId: "AKIA123",
+            awsSecretAccessKey: "secret",
+            awsRegion: "us-west-2",
+            models: ["claude-x"],
+        })
+        saveSettings({ [ADMIN_PROVIDERS_KEY]: JSON.stringify([bedrock]) })
+        const loaded = loadAdminProviders()
+        expect(loaded).toHaveLength(1)
+        expect(loaded[0].awsAccessKeyId).toBe("AKIA123")
+        expect(loaded[0].awsSecretAccessKey).toBe("secret")
+    })
+
+    it("drops malformed entries and keeps valid ones", () => {
+        saveSettings({
+            [ADMIN_PROVIDERS_KEY]: JSON.stringify([
+                provider({ id: "good" }),
+                { id: "missing-fields" }, // no provider/models
+                { provider: "openai", models: ["x"] }, // no id
+                "not-an-object",
+            ]),
+        })
+        const loaded = loadAdminProviders()
+        expect(loaded).toHaveLength(1)
+        expect(loaded[0].id).toBe("good")
+    })
+
+    it("returns [] when the stored value is not an array", () => {
+        saveSettings({ [ADMIN_PROVIDERS_KEY]: JSON.stringify({ nope: true }) })
+        expect(loadAdminProviders()).toEqual([])
+    })
+
+    it("returns [] on invalid JSON", () => {
+        saveSettings({ [ADMIN_PROVIDERS_KEY]: "{ broken" })
+        expect(loadAdminProviders()).toEqual([])
+    })
+
+    it("drops entries whose secret is an {isSet} marker, not a string", () => {
+        // A hand-edited file could hold a transit-only marker object; if it
+        // slipped through, maskSecret() would throw on a non-string value.
+        saveSettings({
+            [ADMIN_PROVIDERS_KEY]: JSON.stringify([
+                { ...provider(), apiKey: { isSet: true, hint: "…1234" } },
+            ]),
+        })
+        const loaded = loadAdminProviders()
+        expect(loaded).toEqual([])
+        // Masking the loaded list must not throw
+        expect(() => maskAdminProviders(loaded)).not.toThrow()
+    })
+})

tests/unit/admin-settings.test.ts

@@ -0,0 +1,158 @@
+import fs from "fs"
+import os from "os"
+import path from "path"
+import { afterEach, beforeEach, describe, expect, it } from "vitest"
+import {
+    _resetForTests,
+    applyToEnv,
+    getEnvFallback,
+    getValueSource,
+    isSettingsWritable,
+    loadSettings,
+    saveSettings,
+} from "@/lib/admin/settings"
+
+let tmpDir: string
+
+beforeEach(() => {
+    tmpDir = fs.mkdtempSync(path.join(os.tmpdir(), "admin-settings-"))
+    process.env.SETTINGS_FILE = path.join(tmpDir, "settings.json")
+    _resetForTests()
+})
+
+afterEach(() => {
+    _resetForTests()
+    delete process.env.SETTINGS_FILE
+    fs.rmSync(tmpDir, { recursive: true, force: true })
+    delete process.env.TEST_ADMIN_VAR
+})
+
+describe("loadSettings", () => {
+    it("returns empty object when file does not exist", () => {
+        expect(loadSettings()).toEqual({})
+    })
+
+    it("reads values from the settings file", () => {
+        fs.writeFileSync(
+            process.env.SETTINGS_FILE!,
+            JSON.stringify({ version: 1, values: { TEST_ADMIN_VAR: "abc" } }),
+        )
+        expect(loadSettings()).toEqual({ TEST_ADMIN_VAR: "abc" })
+    })
+
+    it("drops non-string values from a corrupted file", () => {
+        fs.writeFileSync(
+            process.env.SETTINGS_FILE!,
+            JSON.stringify({
+                version: 1,
+                values: {
+                    GOOD: "ok",
+                    NUM: 5,
+                    OBJ: { nested: true },
+                    ARR: [1, 2],
+                    NULL: null,
+                },
+            }),
+        )
+        expect(loadSettings()).toEqual({ GOOD: "ok" })
+    })
+
+    it("returns empty object when values is null", () => {
+        fs.writeFileSync(
+            process.env.SETTINGS_FILE!,
+            JSON.stringify({ version: 1, values: null }),
+        )
+        expect(loadSettings()).toEqual({})
+    })
+
+    it("returns empty object when values is an array (no numeric keys)", () => {
+        fs.writeFileSync(
+            process.env.SETTINGS_FILE!,
+            JSON.stringify({ version: 1, values: ["a", "b"] }),
+        )
+        // Without the Array.isArray guard this would yield { "0": "a", ... }
+        expect(loadSettings()).toEqual({})
+    })
+})
+
+describe("applyToEnv / saveSettings", () => {
+    it("overlays file values onto process.env", () => {
+        saveSettings({ TEST_ADMIN_VAR: "from-file" })
+        expect(process.env.TEST_ADMIN_VAR).toBe("from-file")
+    })
+
+    it("file value wins over pre-existing env value", () => {
+        process.env.TEST_ADMIN_VAR = "from-env"
+        saveSettings({ TEST_ADMIN_VAR: "from-file" })
+        expect(process.env.TEST_ADMIN_VAR).toBe("from-file")
+    })
+
+    it("deleting a key restores the original env value", () => {
+        process.env.TEST_ADMIN_VAR = "from-env"
+        saveSettings({ TEST_ADMIN_VAR: "from-file" })
+        saveSettings({ TEST_ADMIN_VAR: null })
+        expect(process.env.TEST_ADMIN_VAR).toBe("from-env")
+    })
+
+    it("deleting a key unsets env when there was no original value", () => {
+        saveSettings({ TEST_ADMIN_VAR: "from-file" })
+        saveSettings({ TEST_ADMIN_VAR: null })
+        expect(process.env.TEST_ADMIN_VAR).toBeUndefined()
+    })
+
+    it("persists across cache reset (file round-trip)", () => {
+        saveSettings({ TEST_ADMIN_VAR: "persisted" })
+        _resetForTests()
+        applyToEnv()
+        expect(process.env.TEST_ADMIN_VAR).toBe("persisted")
+    })
+})
+
+describe("getValueSource / getEnvFallback", () => {
+    it("reports file source when key is in settings", () => {
+        saveSettings({ TEST_ADMIN_VAR: "x" })
+        expect(getValueSource("TEST_ADMIN_VAR")).toBe("file")
+    })
+
+    it("reports env source when only env is set", () => {
+        process.env.TEST_ADMIN_VAR = "from-env"
+        applyToEnv()
+        expect(getValueSource("TEST_ADMIN_VAR")).toBe("env")
+    })
+
+    it("reports default when neither is set", () => {
+        expect(getValueSource("TEST_ADMIN_VAR")).toBe("default")
+    })
+
+    it("returns the shadowed env value as fallback", () => {
+        process.env.TEST_ADMIN_VAR = "from-env"
+        saveSettings({ TEST_ADMIN_VAR: "from-file" })
+        expect(getEnvFallback("TEST_ADMIN_VAR")).toBe("from-env")
+    })
+})
+
+describe("isSettingsWritable", () => {
+    it("returns true for a writable temp dir", () => {
+        expect(isSettingsWritable()).toBe(true)
+    })
+
+    it("returns false for an unwritable path", () => {
+        _resetForTests()
+        process.env.SETTINGS_FILE = "/nonexistent-root-dir/settings.json"
+        expect(isSettingsWritable()).toBe(false)
+    })
+})
+
+describe("settings file on disk", () => {
+    it("writes valid JSON with restrictive permissions", () => {
+        saveSettings({ TEST_ADMIN_VAR: "secret" })
+        const filePath = process.env.SETTINGS_FILE!
+        const parsed = JSON.parse(fs.readFileSync(filePath, "utf8"))
+        expect(parsed).toEqual({
+            version: 1,
+            values: { TEST_ADMIN_VAR: "secret" },
+        })
+        const mode = fs.statSync(filePath).mode & 0o777
+        expect(mode).toBe(0o600)
+    })
+})

tests/unit/ai-providers.test.ts

@@ -1,10 +1,35 @@
 import { afterEach, beforeEach, describe, expect, it, vi } from "vitest"
 import {
     getAIModel,
+    isAihubmixStandardBaseURL,
     resolveBaseURL,
-    supportsImageInput,
     supportsPromptCaching,
 } from "@/lib/ai-providers"
+import { extractAihubmixModelIds } from "@/lib/aihubmix-models"
+
+describe("extractAihubmixModelIds", () => {
+    it("extracts unique chat model IDs from the AIHubMix model list payload", () => {
+        const models = extractAihubmixModelIds({
+            data: [
+                { model_id: "claude-sonnet-4-5-20250929", types: "llm" },
+                { model_id: "gpt-5.1", types: "llm" },
+                { model_id: "gpt-5.1", types: "llm" },
+                { model_id: "gpt-image-2", types: "image_generation,llm" },
+                { model_id: "cohere-rerank-v4.0", types: "rerank" },
+                { model_id: "", types: "llm" },
+                { types: "llm" },
+            ],
+        })
+
+        expect(models).toEqual(["claude-sonnet-4-5-20250929", "gpt-5.1"])
+    })
+
+    it("returns an empty list for malformed payloads", () => {
+        expect(extractAihubmixModelIds({ data: null })).toEqual([])
+        expect(extractAihubmixModelIds({})).toEqual([])
+        expect(extractAihubmixModelIds(null)).toEqual([])
+    })
+})
 
 describe("resolveBaseURL", () => {
     const SERVER_BASE_URL = "https://server-proxy.example.com"
@@ -157,86 +182,6 @@ describe("supportsPromptCaching", () => {
     })
 })
 
-describe("supportsImageInput", () => {
-    it("returns true for models with vision capability", () => {
-        expect(supportsImageInput("gpt-4-vision")).toBe(true)
-        expect(supportsImageInput("qwen-vl")).toBe(true)
-        expect(supportsImageInput("deepseek-vl")).toBe(true)
-    })
-
-    it("returns false for Kimi K2 models without vision", () => {
-        expect(supportsImageInput("kimi-k2")).toBe(false)
-        expect(supportsImageInput("moonshot/kimi-k2")).toBe(false)
-    })
-
-    it("returns true for Kimi K2.5 models (supports vision)", () => {
-        expect(supportsImageInput("kimi-k2.5")).toBe(true)
-        expect(supportsImageInput("moonshotai/kimi-k2.5")).toBe(true)
-    })
-
-    it("returns false for Moonshot v1 text models", () => {
-        expect(supportsImageInput("moonshot-v1-8k")).toBe(false)
-        expect(supportsImageInput("moonshot-v1-32k")).toBe(false)
-        expect(supportsImageInput("moonshot-v1-128k")).toBe(false)
-    })
-
-    it("returns false for MiniMax text models", () => {
-        expect(supportsImageInput("MiniMax-M2.7")).toBe(false)
-        expect(supportsImageInput("MiniMax-M2.5")).toBe(false)
-        expect(supportsImageInput("MiniMax-M2")).toBe(false)
-        expect(supportsImageInput("MiniMax-M2.5-highspeed")).toBe(false)
-    })
-
-    it("returns false for DeepSeek text models", () => {
-        expect(supportsImageInput("deepseek-chat")).toBe(false)
-        expect(supportsImageInput("deepseek-coder")).toBe(false)
-    })
-
-    it("returns false for Qwen text models", () => {
-        expect(supportsImageInput("qwen-turbo")).toBe(false)
-        expect(supportsImageInput("qwen-plus")).toBe(false)
-        expect(supportsImageInput("qwen3-max")).toBe(false)
-    })
-
-    it("returns true for Qwen vision models", () => {
-        expect(supportsImageInput("qwen-vl")).toBe(true)
-        expect(supportsImageInput("Qwen3.5")).toBe(true)
-        expect(supportsImageInput("qwen3.5")).toBe(true)
-        expect(supportsImageInput("qwen3.5-plus")).toBe(true)
-        expect(supportsImageInput("qwen3.5-flash")).toBe(true)
-        expect(supportsImageInput("qwen3-vl-plus")).toBe(true)
-        expect(supportsImageInput("qwen3-vl-flash")).toBe(true)
-    })
-
-    it("returns true for QvQ (Qwen Visual QA) models including OpenRouter-prefixed names", () => {
-        expect(supportsImageInput("qvq-72b-preview")).toBe(true)
-        expect(supportsImageInput("qvq-max")).toBe(true)
-        expect(supportsImageInput("qwen/qvq-72b-preview")).toBe(true)
-        expect(supportsImageInput("qwen/qvq-max")).toBe(true)
-    })
-
-    it("returns false for GLM text models", () => {
-        expect(supportsImageInput("glm-4")).toBe(false)
-        expect(supportsImageInput("glm-4-plus")).toBe(false)
-        expect(supportsImageInput("glm-4-flash")).toBe(false)
-        expect(supportsImageInput("glm-4-long")).toBe(false)
-        expect(supportsImageInput("glm-4.7")).toBe(false)
-        expect(supportsImageInput("glm-5")).toBe(false)
-    })
-
-    it("returns true for GLM vision models", () => {
-        expect(supportsImageInput("glm-4v")).toBe(true)
-        expect(supportsImageInput("glm-4v-9b")).toBe(true)
-        expect(supportsImageInput("glm-4.1v-9b-thinking")).toBe(true)
-    })
-
-    it("returns true for Claude and GPT models by default", () => {
-        expect(supportsImageInput("claude-sonnet-4-5")).toBe(true)
-        expect(supportsImageInput("gpt-4o")).toBe(true)
-        expect(supportsImageInput("gemini-pro")).toBe(true)
-    })
-})
-
 vi.mock("ollama-ai-provider-v2", () => {
     const mockModel = { modelId: "test-model" }
     const mockProviderFn = vi.fn(() => mockModel)
@@ -245,6 +190,189 @@ vi.mock("ollama-ai-provider-v2", () => {
     return { createOllama: mockCreateOllama, ollama: mockOllama }
 })
 
+vi.mock("@ai-sdk/deepseek", () => {
+    const mockModel = { modelId: "test-model" }
+    const mockProviderFn = vi.fn(() => mockModel)
+    const mockCreateDeepSeek = vi.fn(() => mockProviderFn)
+    const mockDeepseek = vi.fn(() => mockModel)
+    return { createDeepSeek: mockCreateDeepSeek, deepseek: mockDeepseek }
+})
+
+vi.mock("@aihubmix/ai-sdk-provider", () => {
+    const mockModel = { modelId: "test-model" }
+    const mockProviderFn = vi.fn(() => mockModel)
+    const mockCreateAihubmix = vi.fn(() => mockProviderFn)
+    const mockAihubmix = vi.fn(() => mockModel)
+    return { aihubmix: mockAihubmix, createAihubmix: mockCreateAihubmix }
+})
+
+vi.mock("@ai-sdk/openai", () => {
+    const mockModel = { modelId: "test-model" }
+    const mockChat = vi.fn(() => mockModel)
+    const mockProviderFn = vi.fn(() => mockModel) as any
+    mockProviderFn.chat = mockChat
+    const mockCreateOpenAI = vi.fn(() => mockProviderFn)
+    const mockOpenai = vi.fn(() => mockModel)
+    return { createOpenAI: mockCreateOpenAI, openai: mockOpenai }
+})
+
+describe("AIHubMix provider", () => {
+    let createAihubmixMock: ReturnType<typeof vi.fn>
+    const savedEnv: Record<string, string | undefined> = {}
+
+    beforeEach(async () => {
+        savedEnv.AIHUBMIX_API_KEY = process.env.AIHUBMIX_API_KEY
+        savedEnv.AIHUBMIX_BASE_URL = process.env.AIHUBMIX_BASE_URL
+        delete process.env.AIHUBMIX_BASE_URL
+
+        const mod = await import("@aihubmix/ai-sdk-provider")
+        createAihubmixMock = mod.createAihubmix as ReturnType<typeof vi.fn>
+        createAihubmixMock.mockClear()
+    })
+
+    afterEach(() => {
+        process.env.AIHUBMIX_API_KEY = savedEnv.AIHUBMIX_API_KEY
+        process.env.AIHUBMIX_BASE_URL = savedEnv.AIHUBMIX_BASE_URL
+    })
+
+    it("uses AIHUBMIX_API_KEY for server configured AIHubMix", () => {
+        process.env.AIHUBMIX_API_KEY = "server-aihubmix-key"
+
+        getAIModel({
+            provider: "aihubmix",
+            modelId: "claude-sonnet-4-5-20250929",
+        })
+
+        expect(createAihubmixMock).toHaveBeenCalledWith({
+            apiKey: "server-aihubmix-key",
+            appCode: "MSBS9675",
+        })
+    })
+
+    it("uses client BYOK API key for AIHubMix", () => {
+        getAIModel({
+            provider: "aihubmix",
+            apiKey: "client-aihubmix-key",
+            modelId: "gpt-5.1",
+        })
+
+        expect(createAihubmixMock).toHaveBeenCalledWith({
+            apiKey: "client-aihubmix-key",
+            appCode: "MSBS9675",
+        })
+    })
+
+    it("recognizes AIHubMix standard endpoints", () => {
+        expect(isAihubmixStandardBaseURL(undefined)).toBe(true)
+        expect(isAihubmixStandardBaseURL("https://aihubmix.com")).toBe(true)
+        expect(isAihubmixStandardBaseURL("https://aihubmix.com/v1/")).toBe(true)
+        expect(isAihubmixStandardBaseURL("https://proxy.example.com/v1")).toBe(
+            false,
+        )
+    })
+})
+
+describe("Atlas Cloud provider", () => {
+    let createOpenAIMock: ReturnType<typeof vi.fn>
+    const savedEnv: Record<string, string | undefined> = {}
+
+    beforeEach(async () => {
+        savedEnv.ATLASCLOUD_API_KEY = process.env.ATLASCLOUD_API_KEY
+        savedEnv.ATLASCLOUD_BASE_URL = process.env.ATLASCLOUD_BASE_URL
+        delete process.env.ATLASCLOUD_BASE_URL
+
+        const mod = await import("@ai-sdk/openai")
+        createOpenAIMock = mod.createOpenAI as ReturnType<typeof vi.fn>
+        createOpenAIMock.mockClear()
+    })
+
+    afterEach(() => {
+        process.env.ATLASCLOUD_API_KEY = savedEnv.ATLASCLOUD_API_KEY
+        process.env.ATLASCLOUD_BASE_URL = savedEnv.ATLASCLOUD_BASE_URL
+    })
+
+    it("uses Atlas Cloud default endpoint with ATLASCLOUD_API_KEY", () => {
+        process.env.ATLASCLOUD_API_KEY = "server-atlas-key"
+
+        getAIModel({
+            provider: "atlascloud",
+            modelId: "qwen/qwen3.5-flash",
+        })
+
+        expect(createOpenAIMock).toHaveBeenCalledWith({
+            apiKey: "server-atlas-key",
+            baseURL: "https://api.atlascloud.ai/v1",
+        })
+    })
+
+    it("uses custom Atlas Cloud base URL when provided", () => {
+        getAIModel({
+            provider: "atlascloud",
+            apiKey: "client-atlas-key",
+            baseUrl: "https://proxy.example.com/v1",
+            modelId: "deepseek-ai/deepseek-v4-pro",
+        })
+
+        expect(createOpenAIMock).toHaveBeenCalledWith({
+            apiKey: "client-atlas-key",
+            baseURL: "https://proxy.example.com/v1",
+        })
+    })
+})
+
+describe("Kimi provider uses createDeepSeek for reasoning_content support", () => {
+    let createDeepSeekMock: ReturnType<typeof vi.fn>
+    const savedEnv: Record<string, string | undefined> = {}
+
+    beforeEach(async () => {
+        savedEnv.KIMI_API_KEY = process.env.KIMI_API_KEY
+        savedEnv.KIMI_BASE_URL = process.env.KIMI_BASE_URL
+        delete process.env.KIMI_BASE_URL
+
+        const mod = await import("@ai-sdk/deepseek")
+        createDeepSeekMock = mod.createDeepSeek as ReturnType<typeof vi.fn>
+        createDeepSeekMock.mockClear()
+    })
+
+    afterEach(() => {
+        process.env.KIMI_API_KEY = savedEnv.KIMI_API_KEY
+        process.env.KIMI_BASE_URL = savedEnv.KIMI_BASE_URL
+    })
+
+    it("uses createDeepSeek with Kimi default base URL for reasoning_content support", () => {
+        process.env.KIMI_API_KEY = "test-kimi-key"
+
+        getAIModel({
+            provider: "kimi",
+            apiKey: "test-kimi-key",
+            modelId: "moonshot-v1-8k",
+        })
+
+        expect(createDeepSeekMock).toHaveBeenCalledWith(
+            expect.objectContaining({
+                baseURL: "https://api.moonshot.cn/v1",
+            }),
+        )
+    })
+
+    it("uses custom base URL when provided for kimi provider", () => {
+        process.env.KIMI_API_KEY = "test-kimi-key"
+
+        getAIModel({
+            provider: "kimi",
+            apiKey: "test-kimi-key",
+            baseUrl: "https://custom-kimi-endpoint.com/v1",
+            modelId: "kimi-k2.6",
+        })
+
+        expect(createDeepSeekMock).toHaveBeenCalledWith(
+            expect.objectContaining({
+                baseURL: "https://custom-kimi-endpoint.com/v1",
+            }),
+        )
+    })
+})
+
 describe("Ollama API key security", () => {
     let createOllamaMock: ReturnType<typeof vi.fn>
     const savedEnv: Record<string, string | undefined> = {}

tests/unit/output-token-limit.test.ts

@@ -0,0 +1,271 @@
+import { describe, expect, it } from "vitest"
+import {
+    DEFAULT_MAX_OUTPUT_TOKENS,
+    parseOutputTokenLimit,
+    resolveMaxOutputTokens,
+    withOutputTokenLimitFallback,
+} from "@/lib/output-token-limit"
+
+describe("parseOutputTokenLimit", () => {
+    it("reads the ceiling from a Bedrock rejection", () => {
+        const error = {
+            message:
+                "The maximum tokens you requested exceeds the model limit of 4096. Try again with a maximum tokens value that is lower than 4096.",
+        }
+        expect(parseOutputTokenLimit(error)).toBe(4096)
+    })
+
+    it("subtracts the input when the ceiling covers input plus output", () => {
+        const error = {
+            message:
+                "This endpoint's maximum context length is 64000 tokens. However, you requested about 64025 tokens (25 of text input, 64000 in the output).",
+        }
+        // 64000 - 25 - 1024 margin
+        expect(parseOutputTokenLimit(error)).toBe(62951)
+    })
+
+    it("reads the ceiling from an Anthropic rejection", () => {
+        const error = {
+            message:
+                "max_tokens: 200000 > 64000, which is the maximum allowed number of output tokens for claude-sonnet-4-5",
+        }
+        expect(parseOutputTokenLimit(error)).toBe(64000)
+    })
+
+    it("reads the ceiling from an OpenAI rejection", () => {
+        const error = {
+            message:
+                "max_tokens is too large: 64000. This model supports at most 16384 completion tokens",
+        }
+        expect(parseOutputTokenLimit(error)).toBe(16384)
+    })
+
+    it("looks in the response body too", () => {
+        const error = {
+            message: "Bad request",
+            responseBody: '{"message":"exceeds the model limit of 10000."}',
+        }
+        expect(parseOutputTokenLimit(error)).toBe(10000)
+    })
+
+    it("returns null for unrelated errors", () => {
+        expect(parseOutputTokenLimit({ message: "Invalid API key" })).toBeNull()
+        expect(parseOutputTokenLimit(undefined)).toBeNull()
+    })
+
+    it("ignores a number that is not about tokens", () => {
+        // An earlier draft matched "lower than N" generically, which turned any
+        // message shaped like this into a bogus budget
+        expect(
+            parseOutputTokenLimit({
+                message: "temperature must be lower than 2",
+                statusCode: 400,
+            }),
+        ).toBeNull()
+        expect(
+            parseOutputTokenLimit({
+                message: "reduce requests to lower than 60 per minute",
+                statusCode: 429,
+            }),
+        ).toBeNull()
+    })
+
+    it("skips errors whose status is not a bad request", () => {
+        const error = {
+            message: "exceeds the model limit of 4096",
+            statusCode: 429,
+        }
+        expect(parseOutputTokenLimit(error)).toBeNull()
+    })
+
+    it("rejects a ceiling too small to hold a diagram", () => {
+        expect(
+            parseOutputTokenLimit({ message: "model limit of 200" }),
+        ).toBeNull()
+        // Context ceiling that leaves almost nothing after the input
+        expect(
+            parseOutputTokenLimit({
+                message:
+                    "This endpoint's maximum context length is 64000 tokens. However, you requested about 128000 tokens (63500 of text input, 64000 in the output).",
+            }),
+        ).toBeNull()
+    })
+
+    it("returns null when the input alone fills the context", () => {
+        const error = {
+            message:
+                "This endpoint's maximum context length is 1000 tokens. However, you requested about 65000 tokens (64000 of text input, 1000 in the output).",
+        }
+        expect(parseOutputTokenLimit(error)).toBeNull()
+    })
+})
+
+describe("resolveMaxOutputTokens", () => {
+    it("uses a valid header value", () => {
+        expect(resolveMaxOutputTokens("32000")).toBe(32000)
+    })
+
+    it("falls back to the default for missing or bogus values", () => {
+        expect(resolveMaxOutputTokens(null)).toBe(DEFAULT_MAX_OUTPUT_TOKENS)
+        expect(resolveMaxOutputTokens("")).toBe(DEFAULT_MAX_OUTPUT_TOKENS)
+        expect(resolveMaxOutputTokens("abc")).toBe(DEFAULT_MAX_OUTPUT_TOKENS)
+        expect(resolveMaxOutputTokens("0")).toBe(DEFAULT_MAX_OUTPUT_TOKENS)
+        expect(resolveMaxOutputTokens("-5")).toBe(DEFAULT_MAX_OUTPUT_TOKENS)
+        expect(resolveMaxOutputTokens("1.5")).toBe(DEFAULT_MAX_OUTPUT_TOKENS)
+        // Above the sanity ceiling, e.g. an extra zero
+        expect(resolveMaxOutputTokens("640000")).toBe(DEFAULT_MAX_OUTPUT_TOKENS)
+    })
+
+    it("uses the env value when no header is sent, and validates it too", () => {
+        const original = process.env.MAX_OUTPUT_TOKENS
+        try {
+            process.env.MAX_OUTPUT_TOKENS = "24000"
+            expect(resolveMaxOutputTokens(null)).toBe(24000)
+            // Header still wins
+            expect(resolveMaxOutputTokens("8000")).toBe(8000)
+
+            process.env.MAX_OUTPUT_TOKENS = "-1"
+            expect(resolveMaxOutputTokens(null)).toBe(DEFAULT_MAX_OUTPUT_TOKENS)
+        } finally {
+            if (original === undefined) delete process.env.MAX_OUTPUT_TOKENS
+            else process.env.MAX_OUTPUT_TOKENS = original
+        }
+    })
+})
+
+/** Minimal stand-in for a v3 language model that records what it was asked for. */
+function fakeModel(
+    behaviors: Array<() => Promise<unknown>>,
+): [any, Array<Record<string, unknown>>] {
+    const calls: Array<Record<string, unknown>> = []
+    let index = 0
+    const model = {
+        specificationVersion: "v3" as const,
+        provider: "test",
+        modelId: "test-model",
+        supportedUrls: {},
+        doGenerate: async () => {
+            throw new Error("not used")
+        },
+        doStream: async (options: Record<string, unknown>) => {
+            calls.push(options)
+            const behavior = behaviors[index] ?? behaviors[behaviors.length - 1]
+            index++
+            return behavior()
+        },
+    }
+    return [model, calls]
+}
+
+const STREAM_OK = { stream: new ReadableStream() }
+
+describe("withOutputTokenLimitFallback", () => {
+    it("retries once with the ceiling named in the rejection", async () => {
+        const [model, calls] = fakeModel([
+            () =>
+                Promise.reject(
+                    Object.assign(
+                        new Error("exceeds the model limit of 4096"),
+                        { statusCode: 400 },
+                    ),
+                ),
+            () => Promise.resolve(STREAM_OK),
+        ])
+
+        const wrapped = withOutputTokenLimitFallback(model)
+        await wrapped.doStream({ prompt: [], maxOutputTokens: 64000 } as any)
+
+        expect(calls.map((c) => c.maxOutputTokens)).toEqual([64000, 4096])
+    })
+
+    it("does not retry an error it cannot attribute to the budget", async () => {
+        const [model, calls] = fakeModel([
+            () =>
+                Promise.reject(
+                    Object.assign(new Error("Invalid API key"), {
+                        statusCode: 401,
+                    }),
+                ),
+        ])
+
+        const wrapped = withOutputTokenLimitFallback(model)
+        await expect(
+            wrapped.doStream({ prompt: [], maxOutputTokens: 64000 } as any),
+        ).rejects.toThrow("Invalid API key")
+
+        expect(calls).toHaveLength(1)
+    })
+
+    it("does not retry when the ceiling is not actually smaller", async () => {
+        const [model, calls] = fakeModel([
+            () =>
+                Promise.reject(
+                    Object.assign(
+                        new Error("exceeds the model limit of 64000"),
+                        { statusCode: 400 },
+                    ),
+                ),
+        ])
+
+        const wrapped = withOutputTokenLimitFallback(model)
+        await expect(
+            wrapped.doStream({ prompt: [], maxOutputTokens: 64000 } as any),
+        ).rejects.toThrow()
+
+        expect(calls).toHaveLength(1)
+    })
+
+    it("retries at most once, so a second rejection propagates", async () => {
+        const [model, calls] = fakeModel([
+            () =>
+                Promise.reject(
+                    Object.assign(
+                        new Error("exceeds the model limit of 4096"),
+                        { statusCode: 400 },
+                    ),
+                ),
+            () =>
+                Promise.reject(
+                    Object.assign(
+                        new Error("exceeds the model limit of 2048"),
+                        { statusCode: 400 },
+                    ),
+                ),
+        ])
+
+        const wrapped = withOutputTokenLimitFallback(model)
+        await expect(
+            wrapped.doStream({ prompt: [], maxOutputTokens: 64000 } as any),
+        ).rejects.toThrow("model limit of 2048")
+
+        expect(calls).toHaveLength(2)
+    })
+
+    it("keeps the other call options when retrying", async () => {
+        const [model, calls] = fakeModel([
+            () =>
+                Promise.reject(
+                    Object.assign(
+                        new Error("exceeds the model limit of 4096"),
+                        { statusCode: 400 },
+                    ),
+                ),
+            () => Promise.resolve(STREAM_OK),
+        ])
+
+        const wrapped = withOutputTokenLimitFallback(model)
+        await wrapped.doStream({
+            prompt: [],
+            maxOutputTokens: 64000,
+            temperature: 0.4,
+            providerOptions: {
+                bedrock: { reasoningConfig: { type: "enabled" } },
+            },
+        } as any)
+
+        expect(calls[1].temperature).toBe(0.4)
+        expect(calls[1].providerOptions).toEqual({
+            bedrock: { reasoningConfig: { type: "enabled" } },
+        })
+    })
+})

tests/unit/server-model-config.test.ts

@@ -1,4 +1,5 @@
-import { afterEach, describe, expect, it } from "vitest"
+import { afterEach, beforeEach, describe, expect, it } from "vitest"
+import { _resetForTests } from "@/lib/admin/settings"
 import {
     loadFlattenedServerModels,
     type ServerModelsConfig,
@@ -7,11 +8,20 @@ import {
 
 const ORIGINAL_ENV = { ...process.env }
 
+beforeEach(() => {
+    // Isolate from any local data/settings.json (admin panel providers
+    // are merged into the server models config)
+    process.env.SETTINGS_FILE = "/nonexistent/settings.json"
+    _resetForTests()
+})
+
 afterEach(() => {
+    _resetForTests()
     process.env.AI_PROVIDER = ORIGINAL_ENV.AI_PROVIDER
     process.env.AI_MODEL = ORIGINAL_ENV.AI_MODEL
     process.env.AI_MODELS_CONFIG_PATH = ORIGINAL_ENV.AI_MODELS_CONFIG_PATH
     process.env.AI_MODELS_CONFIG = ORIGINAL_ENV.AI_MODELS_CONFIG
+    delete process.env.SETTINGS_FILE
 })
 
 describe("ServerModelsConfigSchema", () => {
@@ -29,6 +39,22 @@ describe("ServerModelsConfigSchema", () => {
         expect(() => ServerModelsConfigSchema.parse(config)).not.toThrow()
     })
 
+    it("accepts Atlas Cloud provider names", () => {
+        const config: ServerModelsConfig = {
+            providers: [
+                {
+                    name: "Atlas Cloud Server",
+                    provider: "atlascloud",
+                    models: ["qwen/qwen3.5-flash"],
+                    apiKeyEnv: "ATLASCLOUD_API_KEY",
+                    baseUrlEnv: "ATLASCLOUD_BASE_URL",
+                },
+            ],
+        }
+
+        expect(() => ServerModelsConfigSchema.parse(config)).not.toThrow()
+    })
+
     it("rejects invalid provider names", () => {
         const invalidConfig = {
             providers: [
@@ -149,6 +175,44 @@ describe("loadFlattenedServerModels", () => {
         expect(defaultModel.modelId).toBe("gpt-4o") // First model of default provider
     })
 
+    it("falls back to comma-separated AI_MODEL when no other config is set", async () => {
+        process.env.AI_MODELS_CONFIG = ""
+        process.env.AI_MODELS_CONFIG_PATH = `non-existent-config-${Date.now()}.json`
+        process.env.AI_PROVIDER = "openai"
+        process.env.AI_MODEL = "gpt-4o, gpt-4o-mini, gpt-4o"
+
+        const models = await loadFlattenedServerModels()
+
+        // Trims, deduplicates, and preserves order
+        expect(models.map((m) => m.modelId)).toEqual(["gpt-4o", "gpt-4o-mini"])
+        expect(models.every((m) => m.provider === "openai")).toBe(true)
+
+        // First model is marked default (provider has default: true)
+        const defaults = models.filter((m) => m.isDefault)
+        expect(defaults.length).toBe(1)
+        expect(defaults[0].modelId).toBe("gpt-4o")
+    })
+
+    it("does not synthesize when AI_MODEL has no comma", async () => {
+        process.env.AI_MODELS_CONFIG = ""
+        process.env.AI_MODELS_CONFIG_PATH = `non-existent-config-${Date.now()}.json`
+        process.env.AI_PROVIDER = "openai"
+        process.env.AI_MODEL = "gpt-4o"
+
+        const models = await loadFlattenedServerModels()
+        expect(models).toEqual([])
+    })
+
+    it("does not synthesize when AI_PROVIDER is unset", async () => {
+        process.env.AI_MODELS_CONFIG = ""
+        process.env.AI_MODELS_CONFIG_PATH = `non-existent-config-${Date.now()}.json`
+        delete process.env.AI_PROVIDER
+        process.env.AI_MODEL = "gpt-4o, gpt-4o-mini"
+
+        const models = await loadFlattenedServerModels()
+        expect(models).toEqual([])
+    })
+
     it("preserves apiKeyEnv array in flattened models for load balancing", async () => {
         const config: ServerModelsConfig = {
             providers: [

tests/unit/ssrf-protection.test.ts

@@ -0,0 +1,79 @@
+import { beforeEach, describe, expect, it, vi } from "vitest"
+import { isPrivateUrl } from "@/lib/ssrf-protection"
+
+// Mock DNS so tests are deterministic and never hit the network.
+const lookupMock = vi.hoisted(() => vi.fn())
+vi.mock("node:dns/promises", () => ({
+    default: { lookup: lookupMock },
+    lookup: lookupMock,
+}))
+
+describe("isPrivateUrl", () => {
+    beforeEach(() => {
+        lookupMock.mockReset()
+    })
+
+    it("blocks private IPv6 URLs (string-only fast path, no DNS)", async () => {
+        expect(await isPrivateUrl("http://[::1]/")).toBe(true)
+        expect(await isPrivateUrl("http://[0:0:0:0:0:0:0:1]/")).toBe(true)
+        expect(await isPrivateUrl("http://[::]/")).toBe(true)
+        expect(await isPrivateUrl("http://[::ffff:127.0.0.1]/")).toBe(true)
+        expect(await isPrivateUrl("http://[fc00::1]/")).toBe(true)
+        expect(await isPrivateUrl("http://[fd12:3456:789a::1]/")).toBe(true)
+        expect(await isPrivateUrl("http://[fe80::1]/")).toBe(true)
+        expect(await isPrivateUrl("http://[fe9f::1]/")).toBe(true)
+        expect(await isPrivateUrl("http://[febf::1]/")).toBe(true)
+        expect(lookupMock).not.toHaveBeenCalled()
+    })
+
+    it("blocks literal private IPv4 without DNS", async () => {
+        expect(await isPrivateUrl("http://127.0.0.1/")).toBe(true)
+        expect(await isPrivateUrl("http://10.0.0.5/")).toBe(true)
+        expect(await isPrivateUrl("http://192.168.1.1/")).toBe(true)
+        expect(await isPrivateUrl("http://169.254.169.254/")).toBe(true)
+        expect(await isPrivateUrl("http://0.0.0.0/")).toBe(true)
+        // 100.64.0.0/10 CGNAT (RFC 6598), routable in some cloud internal nets
+        expect(await isPrivateUrl("http://100.64.0.1/")).toBe(true)
+        expect(await isPrivateUrl("http://100.127.255.255/")).toBe(true)
+        expect(lookupMock).not.toHaveBeenCalled()
+    })
+
+    it("treats CGNAT boundaries correctly", async () => {
+        // 100.63.x and 100.128.x are outside 100.64.0.0/10 → public
+        lookupMock.mockResolvedValue([{ address: "100.63.255.255", family: 4 }])
+        expect(await isPrivateUrl("http://just-below.example/")).toBe(false)
+        lookupMock.mockResolvedValue([{ address: "100.128.0.1", family: 4 }])
+        expect(await isPrivateUrl("http://just-above.example/")).toBe(false)
+    })
+
+    it("blocks a hostname that resolves to a private IPv6 address", async () => {
+        lookupMock.mockResolvedValue([{ address: "fd00::1", family: 6 }])
+        expect(await isPrivateUrl("http://v6.example.com/")).toBe(true)
+    })
+
+    it("allows public URLs that resolve to public IPs", async () => {
+        lookupMock.mockResolvedValue([{ address: "93.184.216.34", family: 4 }])
+        expect(await isPrivateUrl("https://example.com/article")).toBe(false)
+    })
+
+    it("blocks public-looking hostnames that resolve to a private IP (DNS-rebinding-style bypass)", async () => {
+        // e.g. 127-0-0-1.sslip.io resolves to 127.0.0.1
+        lookupMock.mockResolvedValue([{ address: "127.0.0.1", family: 4 }])
+        expect(await isPrivateUrl("http://127-0-0-1.sslip.io/")).toBe(true)
+    })
+
+    it("blocks when any resolved address is private", async () => {
+        lookupMock.mockResolvedValue([
+            { address: "93.184.216.34", family: 4 },
+            { address: "10.1.2.3", family: 4 },
+        ])
+        expect(await isPrivateUrl("http://mixed.example.com/")).toBe(true)
+    })
+
+    it("blocks when DNS resolution fails", async () => {
+        lookupMock.mockRejectedValue(new Error("ENOTFOUND"))
+        expect(await isPrivateUrl("http://does-not-resolve.example/")).toBe(
+            true,
+        )
+    })
+})

vercel.json

@@ -2,7 +2,7 @@
     "functions": {
         "app/api/chat/route.ts": {
             "memory": 512,
-            "maxDuration": 120
+            "maxDuration": 300
         },
         "app/api/**/route.ts": {
             "memory": 256,