rtabmap_ros/rtabmap_sync/doc/rgb_sync.md

rgb_sync

Groups a camera's color image and calibration into a single rtabmap_msgs/msg/RGBDImage, with no depth.

The monocular counterpart of rgbd_sync. It exists for pipelines that have no depth to offer: a single camera doing appearance-based loop closure detection and relocalization against a map built earlier, where images are used to recognize places rather than to reconstruct them.

Without depth, RTAB-Map cannot build a metric map from these frames alone. It can still detect that a place has been seen before, which is enough for relocalization in an existing map and for adding loop closure constraints to a graph whose geometry comes from odometry or a lidar.

The camera cannot supply a pose here — visual odometry needs depth or a stereo baseline — so the pose has to come from somewhere else:

flowchart LR
    CAM["camera driver"]
    SYNC["rgb_sync"]
    ODOM["odometry source<br>wheel, lidar or external"]
    MAP["rtabmap"]
    CAM -->|rgb/image| SYNC
    CAM -->|rgb/camera_info| SYNC
    SYNC -->|rgbd_image| MAP
    ODOM -->|odometry| MAP

Contents

• Usage
• Subscribed Topics
• Published Topics
• Parameters
• fill_empty_depth
• Synchronization
• Diagnostics

Usage

ros2 run rtabmap_sync rgb_sync --ros-args \
  -r rgb/image:=/camera/image_raw \
  -r rgb/camera_info:=/camera/camera_info

ComposableNode(
    package='rtabmap_sync',
    plugin='rtabmap_sync::RGBSync',
    name='rgb_sync',
    remappings=[('rgb/image', '/camera/image_raw'),
                ('rgb/camera_info', '/camera/camera_info')])

Subscribed Topics

Topic	Type	Description
rgb/image	sensor_msgs/msg/Image	Color image. Goes through image_transport.
rgb/camera_info	sensor_msgs/msg/CameraInfo	Calibration of the camera.

Published Topics

Topic	Type	Description
rgbd_image	rtabmap_msgs/msg/RGBDImage	The image and its calibration. The depth slot is left empty unless fill_empty_depth. Published only when someone is subscribed.
rgbd_image/compressed	rtabmap_msgs/msg/RGBDImage	The same frame with the image as JPEG. Published only when someone is subscribed.

The output's header.frame_id comes from the camera_info; its header.stamp is the image's.

Parameters

Parameter	Type	Default	Description
approx_sync	bool	false	Match the image and its calibration by nearest stamp. Defaults to exact; see Synchronization.
approx_sync_max_interval	double	0.0	Reject pairs spanning more than this many seconds. 0 disables.
topic_queue_size	int	10	Queue depth of each input subscription.
sync_queue_size	int	10	Queue depth of the synchronizer.
queue_size	int	—	Deprecated, renamed to sync_queue_size.
qos	int	0	Reliability of the subscription and the publishers: 0 system default, 1 reliable, 2 best effort.
qos_camera_info	int	value of qos	Reliability of the rgb/camera_info subscription alone.
fill_empty_depth	bool	false	Add an all-zero depth image the size of the color one. See below.
compressed_rate	double	0.0	Maximum rate, in Hz, of rgbd_image/compressed. 0 means every frame.
image_transport	string	"raw"	Transport for rgb/image, e.g. compressed.

fill_empty_depth

By default the output carries no depth image and no depth calibration, which is how a consumer tells "this camera has no depth" from "this frame's depth happens to be all zeros".

Some consumers refuse a message without one. fill_empty_depth gives them a depth image of the right size and encoding (16UC1) filled with zeros, registered to the color camera and sharing its calibration. Zero in a depth image means no reading, so the frame still carries no geometry — the flag changes the shape of the message, not its content. Leave it off unless something downstream requires it.

Synchronization

approx_sync defaults to false here. A driver built on image_transport's camera publisher sends the image and its camera_info as a pair carrying the same stamp, so there is nothing to approximate: the exact policy is cheaper and cannot mismatch.

Set approx_sync:=true when the two do not share a stamp — a camera_info republished on its own timer, or read from a YAML file and stamped with the current time. That is the case to watch for if the node is silent: the calibration values are constant and look fine, but their stamps never match an image.

ros2 topic echo --once /camera/image_raw --field header.stamp
ros2 topic echo --once /camera/camera_info --field header.stamp

Diagnostics

The node publishes to /diagnostics — input rate, output rate, and a warning in the log every 5 seconds while nothing is arriving.