mirror of
https://github.com/orbbec/OrbbecSDK_ROS2.git
synced 2026-10-04 03:57:46 +08:00
112 lines
5.2 KiB
YAML
112 lines
5.2 KiB
YAML
# config/*.yaml files are used to configure the camera parameters
|
|
---
|
|
orbbec_ros:
|
|
camera_parameters:
|
|
general:
|
|
# Camera model. upport product models by referencing config/*.yaml
|
|
camera_model: "astra2"
|
|
# Path to the configuration file. If empty, default parameters will be used
|
|
config_file_path: "astra2.yaml"
|
|
|
|
deivce:
|
|
# camera name, usually overwritten by launch file
|
|
camera_name: "camera"
|
|
# camera serial number, usually overwritten by launch file
|
|
serial_number: ""
|
|
# The USB port of the camera. This parameter is required when using multiple cameras.
|
|
usb_port: ""
|
|
# Number of devices. If multiple cameras are required, this parameter must be filled in launch file
|
|
device_num: 1
|
|
# The delay time for reopening the device, in milliseconds. Usually, there is no need to modify by default.
|
|
connection_delay: 100
|
|
|
|
color:
|
|
# If true, the color image will be enabled
|
|
enable_color: true
|
|
# Width of the color image. If 0, the default width will be used
|
|
color_width: 1280
|
|
# Height of the color image. If 0, the default height will be used
|
|
color_height: 720
|
|
# Fps of the color image. If 0, the default FPS will be used
|
|
color_fps: 30
|
|
|
|
depth:
|
|
# If true, the depth image will be enabled
|
|
enable_depth: true
|
|
# Width of the depth image. If 0, the default width will be used
|
|
depth_width: 800
|
|
# Height of the depth image. If 0, the default height will be used
|
|
depth_height: 600
|
|
# Fps of the depth image. If 0, the default FPS will be used
|
|
depth_fps: 30
|
|
# Format of the depth image.
|
|
depth_format: "RLE"
|
|
# Depth registration mode.
|
|
depth_registration: false
|
|
# The alignment mode to be used.
|
|
align_mode: "HW"
|
|
|
|
ir:
|
|
# If false, the left IR image will not be enabled
|
|
enable_ir: true
|
|
# Width of the left IR image. If 0, the default width will be used
|
|
ir_width: 800
|
|
# Height of the left IR image. If 0, the default height will be used
|
|
ir_height: 600
|
|
# Fps of the ir image. If 0, the default FPS will be used
|
|
ir_fps: 30
|
|
# Format of the left IR image. Supported formats are 'Y8'
|
|
ir_format: "Y8"
|
|
|
|
imu:
|
|
# If true, the IMU accelerometer data will be enabled
|
|
enable_accel: false
|
|
# Rate of the
|
|
accel_rate: "100hz"
|
|
# Range of the accelerometer.
|
|
accel_range: "4g"
|
|
# If true, the IMU gyroscope data will be enabled
|
|
enable_gyro: false
|
|
# Rate of the gyroscope.
|
|
gyro_rate: "100hz"
|
|
# Range of the gyroscope.
|
|
gyro_range: "1000dps"
|
|
|
|
point_cloud:
|
|
# If true, the point cloud will be enabled
|
|
enable_point_cloud: true
|
|
# enable color point cloud. {fase:disable, true:enable}
|
|
enable_colored_point_cloud: false
|
|
|
|
advanced:
|
|
# If true, the extrinsics publish will be enabled
|
|
enable_publish_extrinsic: false
|
|
# If true, the frame synchronization will be enabled
|
|
enable_frame_sync: true
|
|
# Publish D2C superimposed image (only for testing).
|
|
enable_d2c_viewer: false
|
|
# If false, the hardware time will not be used
|
|
use_hardware_time: false
|
|
# If false, the host time will not be synchronized with the device time
|
|
enable_sync_host_time: false
|
|
|
|
device_sync:
|
|
# Device synchronization mode. supports: {1.FREE_RUN 2.STANDALONE 3.PRIMARY 4.SECONDARY 5.SECONDARY_SYNCED 6.SOFTWARE_TRIGGERING 7.HARDWARE_TRIGGERING}.
|
|
# For details, Please refer to the OBMultiDeviceSyncMode-related comments in SDK/include/libobsensor/ObTypes.h for a detailed explanation of each mode.
|
|
sync_mode: "STANDALONE"
|
|
# The delay time of the depth image capture after receiving the capture command or trigger signal in microseconds.
|
|
# For details, Please refer to the OBMultiDeviceSyncConfig-related comments in SDK/include/libobsensor/ObTypes.h
|
|
depth_delay_us: 0
|
|
# The delay time of the color image capture after receiving the capture command or trigger signal in microseconds.
|
|
color_delay_us: 0
|
|
# The delay time of the image capture after receiving the capture command or trigger signal in microseconds.
|
|
trigger2image_delay_us: 0
|
|
# Trigger signal output enable flag.
|
|
trigger_out_enabled: true
|
|
# The delay time of the trigger signal output after receiving the capture command or trigger signal in microseconds.
|
|
trigger_out_delay_us: 0
|
|
# The frame number of each stream after each trigger in triggering mode.
|
|
frames_per_trigger: 2
|
|
# software trigger period in ms
|
|
software_trigger_period: 33
|