mirror of
https://github.com/orbbec/OrbbecSDK_ROS2.git
synced 2026-10-04 03:57:46 +08:00
[yaml]Update common.yaml and gemini330_series.yaml
This commit is contained in:
jj
@@ -9,198 +9,92 @@ orbbec_ros:
|
||||
config_file_path: "gemini330_series.yaml"
|
||||
|
||||
deivce:
|
||||
# camera name, usually overwritten by launch file
|
||||
camera_name: "camera"
|
||||
# camera serial number, usually overwritten by launch file
|
||||
serial_number: ""
|
||||
# The USB port of the camera. This parameter is required when using multiple cameras.
|
||||
usb_port: ""
|
||||
# Number of devices. If multiple cameras are required, this parameter must be filled in launch file
|
||||
device_num: 1
|
||||
# The delay time for reopening the device, in milliseconds. Usually, there is no need to modify by default.
|
||||
uvc_backend: "libuvc"
|
||||
vendor_id: "0x2bc5"
|
||||
product_id: ""
|
||||
connection_delay: 10
|
||||
# If true, the heartbeat will be enabled
|
||||
time_domain: "device"
|
||||
retry_on_usb3_detection_failure: false
|
||||
enable_heartbeat: false
|
||||
# If true, the camera will be reset
|
||||
enable_hardware_reset: false
|
||||
# If true, the LDP will be enabled
|
||||
enable_ldp: true
|
||||
# The preset of the device. #For details, Please refer to the comments in SDK/include/libobsensor/Advanced.h for a detailed explanation
|
||||
# Predefined presets doc reference: docs/source/2_installation/package_description.md
|
||||
# Deep working mode support is as follows:{"Default","Hand","High Accuracy","High Density","Medium Density","Custom"}
|
||||
device_preset: "Default"
|
||||
|
||||
color:
|
||||
# If true, the color image will be enabled
|
||||
enable_color: true
|
||||
# Width of the color image. If 0, the default width will be used
|
||||
color_qos: "default"
|
||||
color_camera_info_qos: "default"
|
||||
color_width: 0
|
||||
# Height of the color image. If 0, the default height will be used
|
||||
color_height: 0
|
||||
# Fps of the color image. If 0, the default FPS will be used
|
||||
color_fps: 0
|
||||
# default Format of the color image.
|
||||
color_format: "ANY"
|
||||
# enable auto exposure for the color image
|
||||
enable_color_auto_exposure: true
|
||||
# enable auto white balance for the color image
|
||||
enable_color_auto_white_balance: true
|
||||
# If true, the color image will be undistorted
|
||||
enable_color_undistortion: false
|
||||
color_white_balance: -1
|
||||
color_auto_ae:
|
||||
enable_color_auto_exposure: true
|
||||
color_ae_max_exposure: -1
|
||||
color_manual_ae:
|
||||
color_exposure: -1
|
||||
color_gain: -1
|
||||
color_brightness: -1
|
||||
|
||||
depth:
|
||||
# If true, the depth image will be enabled
|
||||
enable_depth: true
|
||||
# Width of the depth image. If 0, the default width will be used
|
||||
depth_qos: "default"
|
||||
depth_camera_info_qos: "default"
|
||||
depth_width: 0
|
||||
# Height of the depth image. If 0, the default height will be used
|
||||
depth_height: 0
|
||||
# Fps of the depth image. If 0, the default FPS will be used
|
||||
depth_fps: 0
|
||||
# default Format of the depth image.
|
||||
depth_format: "ANY"
|
||||
# If false, the depth scale will not be enabled
|
||||
enable_depth_scale: true
|
||||
|
||||
# D2C Depth registration mode.
|
||||
# Enables hardware that aligns depth frames to color frames. This field is required when setting enable_colored_point_cloud to true
|
||||
depth_registration: true
|
||||
# The alignment mode to be used. Options are "HW" for hardware alignment and "SW" for software alignment
|
||||
align_mode: "SW"
|
||||
|
||||
laser:
|
||||
# Whether to enable the laser. Default value is true
|
||||
enable_laser: false
|
||||
# Laser Switch Alternate Mode, 0: Off, 1: On-Off Alternate, 2: Off-On Alternate. Default value is 0.
|
||||
laser_on_off_mode: 0
|
||||
|
||||
filter:
|
||||
# -enable_decimation_filter
|
||||
enable_decimation_filter: false
|
||||
# -enable_hdr_merge
|
||||
enable_hdr_merge: false
|
||||
# -enable_sequence_id_filter
|
||||
enable_sequence_id_filter: false
|
||||
# -enable_threshold_filter
|
||||
enable_threshold_filter: false
|
||||
# -enable_noise_removal_filter
|
||||
enable_noise_removal_filter: true
|
||||
# -enable_spatial_filter
|
||||
enable_spatial_filter: false
|
||||
# -enable_temporal_filter
|
||||
enable_temporal_filter: false
|
||||
# -enable_hole_filling_filter
|
||||
enable_hole_filling_filter: false
|
||||
# -noise_removal_filter_min_diff
|
||||
noise_removal_filter_min_diff: 256
|
||||
# -noise_removal_filter_max_size
|
||||
noise_removal_filter_max_size: 80
|
||||
# -enable_soft_filter
|
||||
enable_soft_filter: true
|
||||
enable_laser: true
|
||||
|
||||
leftir:
|
||||
# the left IR image will not be enabled
|
||||
enable_left_ir: false
|
||||
left_ir_qos: "default"
|
||||
left_ir_camera_info_qos: "default"
|
||||
left_ir_width: 0
|
||||
left_ir_height: 0
|
||||
left_ir_fps: 0
|
||||
left_ir_format: "ANY"
|
||||
|
||||
rightir:
|
||||
# the right IR image will not be enabled
|
||||
enable_right_ir: false
|
||||
right_ir_camera_info_qos: "default"
|
||||
right_ir_width: 0
|
||||
right_ir_height: 0
|
||||
right_ir_fps: 0
|
||||
right_ir_format: "ANY"
|
||||
|
||||
ir_parameters:
|
||||
enable_ir_auto_exposure: true
|
||||
ir_ae_max_exposure: -1
|
||||
ir_exposure: -1
|
||||
ir_gain: -1
|
||||
ir_brightness: -1
|
||||
|
||||
imu:
|
||||
# If true, the IMU accelerometer data will be enabled
|
||||
enable_accel: false
|
||||
# The frequency of the accelerometer can be selected as 1.5625Hz, 3.125Hz, 6.25Hz, 12.5Hz, 25Hz, 50Hz, 100Hz, 200Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16kHz, 32kHz.
|
||||
# The specific value depends on the current camera.
|
||||
accel_rate: "200hz"
|
||||
# The range of the accelerometer, the optional values are 2g, 4g, 8g, 16g. The specific value depends on the current camera.
|
||||
accel_range: "4g"
|
||||
# If true, the IMU gyroscope data will be enabled
|
||||
enable_gyro: false
|
||||
# The frequency of the gyroscope can be selected as 1.5625hz, 3.125hz, 6.25hz, 12.5hz, 25hz, 50hz, 100hz, 200hz, 500hz, 1kHz, 2kHz, 4kHz, 8kHz, 16kHz, 32kHz.
|
||||
# The specific value depends on the current camera.
|
||||
gyro_rate: "200hz"
|
||||
# The range of the gyroscope, the optional values are 16dps, 31dps, 62dps, 125dps, 250dps, 500dps, 1000dps, 2000dps. The specific value depends on the current camera.
|
||||
gyro_range: "1000dps"
|
||||
# enable_sync_output_accel_gyro
|
||||
enable_sync_output_accel_gyro: false
|
||||
liner_accel_cov: 0.01
|
||||
angular_vel_cov: 0.01
|
||||
|
||||
point_cloud:
|
||||
# enable point cloud. {fase:disable, true:enable}
|
||||
enable_point_cloud: true
|
||||
# enable color point cloud. {fase:disable, true:enable}
|
||||
enable_colored_point_cloud: false
|
||||
|
||||
advanced:
|
||||
# If true, the extrinsics publish will be enabled
|
||||
enable_publish_extrinsic: false
|
||||
# If true, the frame synchronization will be enabled
|
||||
enable_frame_sync: true
|
||||
# global, device, system
|
||||
time_domain: "device"
|
||||
# Publish D2C superimposed image (only for testing).
|
||||
enable_d2c_viewer: false
|
||||
# the host time will be synchronized with the device time
|
||||
enable_sync_host_time: true
|
||||
|
||||
device_sync:
|
||||
# Device synchronization mode. supports: {1.FREE_RUN 2.STANDALONE 3.PRIMARY 4.SECONDARY 5.SECONDARY_SYNCED 6.SOFTWARE_TRIGGERING 7.HARDWARE_TRIGGERING}.
|
||||
# For details, Please refer to the OBMultiDeviceSyncMode-related comments in SDK/include/libobsensor/ObTypes.h for a detailed explanation of each mode.
|
||||
sync_mode: "STANDALONE"
|
||||
# The delay time of the depth image capture after receiving the capture command or trigger signal in microseconds.
|
||||
# For details, Please refer to the OBMultiDeviceSyncConfig-related comments in SDK/include/libobsensor/ObTypes.h
|
||||
depth_delay_us: 0
|
||||
# The delay time of the color image capture after receiving the capture command or trigger signal in microseconds.
|
||||
color_delay_us: 0
|
||||
# The delay time of the image capture after receiving the capture command or trigger signal in microseconds.
|
||||
trigger2image_delay_us: 0
|
||||
# Trigger signal output enable flag.
|
||||
trigger_out_enabled: true
|
||||
# The delay time of the trigger signal output after receiving the capture command or trigger signal in microseconds.
|
||||
trigger_out_delay_us: 0
|
||||
# The frame number of each stream after each trigger in triggering mode.
|
||||
frames_per_trigger: 2
|
||||
# software trigger period in ms
|
||||
software_trigger_period: 33
|
||||
|
||||
gmsldevice_trigger:
|
||||
enable_gmsl_trigger: false
|
||||
gmsl_trigger_fps: 3000
|
||||
|
||||
# config for interleave mode。
|
||||
# interleave_ae_mode is currently supported by the gemini330 series,
|
||||
# and specific products can be checked for support of interleave_ae_mode by referring to the product manual.
|
||||
interleave_ae_mode:
|
||||
# 'hdr' or 'laser'
|
||||
interleave_ae_mode: "laser"
|
||||
#enable interleave frame
|
||||
interleave_frame_enable: false
|
||||
|
||||
interleave_skip:
|
||||
#enable interleave skip
|
||||
interleave_skip_enable: false
|
||||
# 0:skip pattern ir 1: skip flood ir
|
||||
interleave_skip_index: 1
|
||||
|
||||
interleave_hdr_param:
|
||||
hdr_index1_laser_control: 1
|
||||
hdr_index1_depth_exposure: 1
|
||||
hdr_index1_depth_gain: 16
|
||||
hdr_index1_ir_brightness: 20
|
||||
hdr_index1_ir_ae_max_exposure: 2000
|
||||
hdr_index0_laser_control: 1
|
||||
hdr_index0_depth_exposure: 7500
|
||||
hdr_index0_depth_gain: 16
|
||||
hdr_index0_ir_brightness: 60
|
||||
hdr_index0_ir_ae_max_exposure: 10000
|
||||
|
||||
interleave_laser_param:
|
||||
laser_index1_laser_control: 0
|
||||
laser_index1_depth_exposure: 3000
|
||||
laser_index1_depth_gain: 16
|
||||
laser_index1_ir_brightness: 60
|
||||
laser_index1_ir_ae_max_exposure: 17000
|
||||
laser_index0_laser_control: 1
|
||||
laser_index0_depth_exposure: 3000
|
||||
laser_index0_depth_gain: 16
|
||||
laser_index0_ir_brightness: 60
|
||||
laser_index0_ir_ae_max_exposure: 30000
|
||||
|
||||
Reference in New Issue
Block a user