OrbbecSDK_ROS2/orbbec_camera/config/gemini2L.yaml

# config/*.yaml files are used to configure the camera parameters
---
orbbec_ros:
    camera_parameters:
        general:
            # Camera model. upport product models by referencing config/*.yaml
            camera_model: "gemini2L"
            # Path to the configuration file. If empty, default parameters will be used
            config_file_path: "gemini2L.yaml"

        deivce:
            # camera name, usually overwritten by launch file
            camera_name: "camera"
            # camera serial number, usually overwritten by launch file
            serial_number: ""
            # The USB port of the camera. This parameter is required when using multiple cameras.
            usb_port: ""
            # Number of devices. If multiple cameras are required, this parameter must be filled in launch file
            device_num: 1
            # The delay time for reopening the device, in milliseconds. Usually, there is no need to modify by default.
            connection_delay: 100

            network_device:
                # Whether to enable the function of enumerating network devices. True means enabled and false means disabled. This function is only supported by Femto Mega and Gemini 2 XL devices.
                # When accessing these devices through the network, the IP address of the device needs to be preconfigured. The enable switch needs to be set to true.
                enumerate_net_device: false
                # Port number of the network device. If 0, a random port will be used
                net_device_port: 0
                # IP address of the network device.
                net_device_ip: ""

        color:
            # If true, the color image will be enabled
            enable_color: true
            # Width of the color image. If 0, the default width will be used
            color_width: 1280
            # Height of the color image. If 0, the default height will be used
            color_height: 800
            # fps of the color image. If 0, the default FPS will be used
            color_fps: 30
            # Format of the color image.
            color_format: "MJPG"

        depth:
            # If true, the depth image will be enabled
            enable_depth: true
            # Width of the depth image. If 0, the default width will be used
            depth_width: 1280
            # Height of the depth image. If 0, the default height will be used
            depth_height: 800
            # If 0, the default FPS will be used
            depth_fps: 30
            # Format of the depth image.
            depth_format: "Y16"
            # If false, the depth scale will not be enabled
            enable_depth_scale: true

            # Depth registration mode.
            depth_registration: false
            # The alignment mode to be used. Options are "HW" for hardware alignment and "SW" for software alignment
            align_mode: "HW"

            # Gemini 2, Gemini 2 L, and Gemini 2 XL cameras support deep working mode switching
            # Specific camera deep working mode support types can be found in the deep mode comments.
            # Deep working mode support is as follows:{"Unbinned Dense Default","Unbinned Sparse Default","Binned Sparse Default","Obstacle Avoidance"}
            # Depth work mode. #For details, Please refer to the comments in SDK/include/libobsensor/Advanced.h for a detailed explanation.
            depth_work_mode: ""

            # Configure the loading path of the deep filtering configuration file. By default, the deep filtering configuration file is located in the /config/depthfilter directory and is only supported by Gemini2.
            depth_filter_config: ""

            filter:
                soft_filter:
                    # If true, the soft filter will be enabled
                    enable_soft_filter: true
                    # soft_filter_max_diff, If -1, the default value will be used
                    soft_filter_max_diff: -1
                    # soft_filter_speckle_size, If -1, the default value will be used
                    soft_filter_speckle_size: -1

                noise_removal_filter:
                    # If true, the noise removal filter will be enabled
                    enable_noise_removal_filter: true

        ir:
            # enable the ir camera stream
            enable_ir: true
            # Width of the left IR image. If 0, the default width will be used
            ir_width: 640
            # Height of the left IR image. If 0, the default height will be used
            ir_height: 400
            # If 0, the default FPS will be used
            ir_fps: 15
            # Format of the left IR image.
            ir_format: "Y8"

        imu:
            # If true, enable the IMU accelerometer data  will be enabled
            enable_accel: false
            # Rate of the accelerometer
            accel_rate: "100hz"
            # Range of the accelerometer.
            accel_range: "4g"
            # If true, enable the IMU gyroscope data  will be enabled
            enable_gyro: false
            # Rate of the gyroscope.
            gyro_rate: "100hz"
            # Range of the gyroscope.
            gyro_range: "1000dps"
            # enable_sync_output_accel_gyro
            enable_sync_output_accel_gyro: false

        point_cloud:
            # If true, the depth point cloud will be enabled
            enable_point_cloud: true
            # enable color point cloud. {fase:disable, true:enable}
            enable_colored_point_cloud: false

        advanced:
            # If false, the hardware time will not be used
            use_hardware_time: true