OrbbecSDK_ROS2/docs/source/5_advanced_guide/net_camera.md

# Net_camera

> This section describes how to use Net camera in OrbbecSDK_ROS2.Currently, only Femto_Mega, Gemini 335Le and Gemini 435Le devices are supported, and other Net devices will be supported in the near future.

## Femto Mega & Gemini 435Le

### Parameter Introduction

Network device settings: `enumerate_net_device` is set to true, which will automatically enumerate network devices.

If you do not want to automatically enumerate network devices,you can set `enumerate_net_device` to false, `net_device_ip` to the device's IP address, and `net_device_port` to the default value of 8090.

* `enumerate_net_device` : Enable automatically enumerate network devices.
* `net_device_ip` : Setting net device's IP address.
* `net_device_port` : Setting net device's port.Usually, you can set it to 8090.

### Single Net camera

> If you need to run Gemini 435Le, you only need to replace [femto_mega.launch.py ](https://github.com/orbbec/OrbbecSDK_ROS2/tree/v2-main/orbbec_camera/launch/femto_mega.launch.py)in the run command with [gemini435_le.launch.py](https://github.com/orbbec/OrbbecSDK_ROS2/tree/v2-main/orbbec_camera/launch/gemini435_le.launch.py)

For [femto_mega.launch.py](https://github.com/orbbec/OrbbecSDK_ROS2/tree/v2-main/orbbec_camera/launch/femto_mega.launch.py) as an example:

- **automatically enumerate network devices:**

```bash
ros2 launch orbbec_camera femto_mega.launch.py enumerate_net_device:=true
```

- **Specify IP address to start the device:**

Note: `net_device_ip` needs to be changed to the IP address of the device, here it is 192.168.1.10

```bash
ros2 launch orbbec_camera femto_mega.launch.py enumerate_net_device:=false net_device_ip:=192.168.1.10 net_device_port:=8090
```

## Gemini 335Le

Network device settings: `enumerate_net_device` must be set to true, set `net_device_ip` to the IP address of the device, and set `net_device_port` to the default value of 8090.

* `enumerate_net_device` : Enable automatically enumerate network devices.
* `net_device_ip` : Setting net device's IP address.
* `net_device_port` : Setting net device's port.Usually, you can set it to 8090.

### Single Net camera

For [gemini_330_series.launch.py](https://github.com/orbbec/OrbbecSDK_ROS2/tree/v2-main/orbbec_camera/launch/gemini_330_series.launch.py) as an example:

- **automatically enumerate network devices:**

```bash
ros2 launch orbbec_camera gemini_330_series.launch.py enumerate_net_device:=true
```

- **Specify IP address to start the device:**

Note: `net_device_ip` needs to be changed to the IP address of the device, here it is 192.168.1.10

```bash
ros2 launch orbbec_camera gemini_330_series.launch.py enumerate_net_device:=true net_device_ip:=192.168.1.10 net_device_port:=8090
```

## Multi Net camera

For [multi_net_camera.launch.py](https://github.com/orbbec/OrbbecSDK_ROS2/blob/v2-main/orbbec_camera/examples/net_camera/multi_net_camera.launch.py) as an example:

```bash
ros2 launch orbbec_camera multi_net_camera.launch.py
```